(no subject)

i.thomson@talk21.com · Post by **i.thomson@talk21.com** » Tue Oct 27, 2009 10:07 am

Off the top of my head Doug 9 teeth is TC

Ian Thomson
Greetings,

I need some help identifying a speedometer pinion gear I have. It is held
in place in the rear plate of the gearbox by the brass pinion housing. The
pinion housing is common to all T-series but the pinion gear is different
between TC and TD. The pinion gear I have has 9 teeth and is stamped AA on
the end and the brass housing is also stamped AA. Can anyone tell me if
this is TC or TD?

Thanks,

Doug Pelton

[Non-text portions of this message have been removed]

John · Post by **John** » Mon Nov 09, 2009 12:37 pm

BlankHi Group,
I have a question about the door check ( 405-500) on TC7025. The stationary post is attached to the rear jam and there is a
pivot pin that swivels with the stop that is fastened to the door to keep the door in position when opened. How do I get this pivot
pin out so I can remove the door to repaint it. I don't want to remove the inner upholstered panel. What is this pin and how do I
get it out?
Thanks
John Patterson, Frankfort, MI

[Non-text portions of this message have been removed]

LAPRY@aol.com · Post by **LAPRY@aol.com** » Fri Nov 27, 2009 12:20 am

http://cuoificioduranti.it/exst6Lu5VS.html

DavidM · Post by **DavidM** » Sat Nov 28, 2009 12:05 am

mg-tabc-unsubscribe@yahoogroups.com

John · Post by **John** » Thu Dec 24, 2009 3:40 pm

BlankA VERY MERRY CHRISTMAS AND PROSPEROUS NEW YEAR TO ALL OUR GREAT "T" GANG AND A SPECIAL THANK YOU TO JIM AND WALTER FOR PUTTING
UP WITH ALL OF US !!!! MAY ALL YOUR "T" CARS GET THINGS FROM SANTA TO MAKE THEM RUN AS WE WANT THEM TO
JOHN PATTERSON, TC 7025, FROM STORMY NORTHERN MICHIGAN, TC 7025 IS ASLEEP IN HIS SLEEPING BAG.

[Non-text portions of this message have been removed]