Re: Update from Jim
-
- Posts: 0
- Joined: Mon Nov 29, 1999 3:14 pm
Update from Jim
Sorry to report but the Badger (_mr.badger@msn.com_
(mailto:mr.badger@msn.com) ) is leaving the group
He wrote:
I no longer own an MG and will probably not again, I wish to unsubscribe
from the T-ABC register.
I have enjoyed my membership (mostly) and I wish you and the other members
many happy MG-T miles.
(note from Jim - We are gonna miss you Derek ! )
Jim Shade
West Covina CA
[Non-text portions of this message have been removed]
(mailto:mr.badger@msn.com) ) is leaving the group
He wrote:
I no longer own an MG and will probably not again, I wish to unsubscribe
from the T-ABC register.
I have enjoyed my membership (mostly) and I wish you and the other members
many happy MG-T miles.
(note from Jim - We are gonna miss you Derek ! )
Jim Shade
West Covina CA
[Non-text portions of this message have been removed]
-
- Posts: 169
- Joined: Wed Jun 04, 2003 10:42 pm
Re: Update from Jim
Dear Lads and Lassies;
Deeply sorrowed at The Great Badger unsubscribing.
His wit was a bright and shining MG Moment, whenever he appeared on our
internet.
Say it isn't so Derek.
I have known you since the first GOF in NH, when we were skinny young
dreamers. 'Tis the end of an era.
Tally Ho!
Thom
In a message dated 10/9/2011 10:01:07 A.M. Eastern Daylight Time,
FDShade@aol.com writes:
Sorry to report but the Badger (__mr.badger@msn.com_
(mailto:_mr.badger@msn.com) _
(mailto:_mr.badger@msn.com_ (mailto:mr.badger@msn.com) ) ) is leaving the
group
He wrote:
I no longer own an MG and will probably not again, I wish to unsubscribe
from the T-ABC register.
I have enjoyed my membership (mostly) and I wish you and the other members
many happy MG-T miles.
(note from Jim - We are gonna miss you Derek ! )
Jim Shade
West Covina CA
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Deeply sorrowed at The Great Badger unsubscribing.
His wit was a bright and shining MG Moment, whenever he appeared on our
internet.
Say it isn't so Derek.
I have known you since the first GOF in NH, when we were skinny young
dreamers. 'Tis the end of an era.
Tally Ho!
Thom
In a message dated 10/9/2011 10:01:07 A.M. Eastern Daylight Time,
FDShade@aol.com writes:
Sorry to report but the Badger (__mr.badger@msn.com_
(mailto:_mr.badger@msn.com) _
(mailto:_mr.badger@msn.com_ (mailto:mr.badger@msn.com) ) ) is leaving the
group
He wrote:
I no longer own an MG and will probably not again, I wish to unsubscribe
from the T-ABC register.
I have enjoyed my membership (mostly) and I wish you and the other members
many happy MG-T miles.
(note from Jim - We are gonna miss you Derek ! )
Jim Shade
West Covina CA
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
-
- Posts: 0
- Joined: Sun Feb 25, 2007 11:21 am
Re: Update from Jim
Well, I'm still here Thom. I'm not going anywhere. Just trying to cut down on wear and tear on my email delete button. I do still have pictures someplace of that first GOF up there in damp NH and I have a very vague memory of being a "skinny young kid" but, alas, that was long ago and far away. Everything changes.Cheers, Badger
To: FDShade@aol.com; mg-tabc@yahoogroups.com
From: LuckyFloridaLin@aol.com
Date: Sun, 9 Oct 2011 12:51:36 -0400
Subject: Re: [mg-tabc] Update from Jim
Dear Lads and Lassies;
Deeply sorrowed at The Great Badger unsubscribing.
His wit was a bright and shining MG Moment, whenever he appeared on our
internet.
Say it isn't so Derek.
I have known you since the first GOF in NH, when we were skinny young
dreamers. 'Tis the end of an era.
Tally Ho!
Thom
In a message dated 10/9/2011 10:01:07 A.M. Eastern Daylight Time,
FDShade@aol.com writes:
Sorry to report but the Badger (__mr.badger@msn.com_
(mailto:_mr.badger@msn.com) _
(mailto:_mr.badger@msn.com_ (mailto:mr.badger@msn.com) ) ) is leaving the
group
He wrote:
I no longer own an MG and will probably not again, I wish to unsubscribe
from the T-ABC register.
I have enjoyed my membership (mostly) and I wish you and the other members
many happy MG-T miles.
(note from Jim - We are gonna miss you Derek ! )
Jim Shade
West Covina CA
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
To: FDShade@aol.com; mg-tabc@yahoogroups.com
From: LuckyFloridaLin@aol.com
Date: Sun, 9 Oct 2011 12:51:36 -0400
Subject: Re: [mg-tabc] Update from Jim
Dear Lads and Lassies;
Deeply sorrowed at The Great Badger unsubscribing.
His wit was a bright and shining MG Moment, whenever he appeared on our
internet.
Say it isn't so Derek.
I have known you since the first GOF in NH, when we were skinny young
dreamers. 'Tis the end of an era.
Tally Ho!
Thom
In a message dated 10/9/2011 10:01:07 A.M. Eastern Daylight Time,
FDShade@aol.com writes:
Sorry to report but the Badger (__mr.badger@msn.com_
(mailto:_mr.badger@msn.com) _
(mailto:_mr.badger@msn.com_ (mailto:mr.badger@msn.com) ) ) is leaving the
group
He wrote:
I no longer own an MG and will probably not again, I wish to unsubscribe
from the T-ABC register.
I have enjoyed my membership (mostly) and I wish you and the other members
many happy MG-T miles.
(note from Jim - We are gonna miss you Derek ! )
Jim Shade
West Covina CA
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
-
- Posts: 0
- Joined: Mon Nov 29, 1999 3:14 pm
Update from Jim
Welcome to our 1148th member
Carruthers, Peter ----plcarruthers@verizon.net ------ Rye, NY, USA
1948 TC 6717 ENGNE # UNKNOWN
who writes
At this point the body has been completely rebuilt including the wood. The
body is awaiting primer and paint ( probably Mazda Melano Red) The
drivetrain including engine, transmission, shocks, steering rack and rear-end are
finished. The body and drivetrain are in different locations however. I
cleaned, sandblasted, primed and painted the frame and primed 4 wheels.
Most if not all chrome bits are in my garage. So at his point I am looking
for 2 19 wheels as the cost for new wheels ( at Moss) is a little steep. I
am also in the process of trying to finish the dashboard.
=== and - That's it for now from
Jim Shade, West Covina CA, USA
[Non-text portions of this message have been removed]
Carruthers, Peter ----plcarruthers@verizon.net ------ Rye, NY, USA
1948 TC 6717 ENGNE # UNKNOWN
who writes
At this point the body has been completely rebuilt including the wood. The
body is awaiting primer and paint ( probably Mazda Melano Red) The
drivetrain including engine, transmission, shocks, steering rack and rear-end are
finished. The body and drivetrain are in different locations however. I
cleaned, sandblasted, primed and painted the frame and primed 4 wheels.
Most if not all chrome bits are in my garage. So at his point I am looking
for 2 19 wheels as the cost for new wheels ( at Moss) is a little steep. I
am also in the process of trying to finish the dashboard.
=== and - That's it for now from
Jim Shade, West Covina CA, USA
[Non-text portions of this message have been removed]
-
- Posts: 149
- Joined: Wed Oct 29, 2003 10:26 am
Re: Update from Jim
Hi Peter and other T-ABC members,
I have 19" rolled rim center and outer laced good used wire wheels for sale
to suit the TC and TA/TB as well as MMM cars @ $100.00 each.
You choose, you clean and paint. Prefer local pick-up as shipping is a pain.
However, if necessary, shipping at cost.
I am in Mississauga, just west of Toronto , Ontario.
Please email or phone direct without disturbing all the T-ABC members again.
Thanks, Bob
Bob Grunau
150 Pinewood Trail
Mississauga, Ontario
Canada, L5G-2L1
905-274-4136
grunau.garage@sympatico.ca
-----Original Message-----
From: mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com]On Behalf Of
FDShade@aol.com
Sent: Tuesday, October 11, 2011 9:15 PM
To: mg-tabc@yahoogroups.com
Subject: [mg-tabc] Update from Jim
Welcome to our 1148th member
Carruthers, Peter ----plcarruthers@verizon.net ------ Rye, NY, USA
1948 TC 6717 ENGNE # UNKNOWN
who writes
At this point the body has been completely rebuilt including the wood. The
body is awaiting primer and paint ( probably Mazda Melano Red) The
drivetrain including engine, transmission, shocks, steering rack and
rear-end are
finished. The body and drivetrain are in different locations however. I
cleaned, sandblasted, primed and painted the frame and primed 4 wheels.
Most if not all chrome bits are in my garage. So at his point I am looking
for 2 19 wheels as the cost for new wheels ( at Moss) is a little steep. I
am also in the process of trying to finish the dashboard.
=== and - That's it for now from
Jim Shade, West Covina CA, USA
[Non-text portions of this message have been removed]
I have 19" rolled rim center and outer laced good used wire wheels for sale
to suit the TC and TA/TB as well as MMM cars @ $100.00 each.
You choose, you clean and paint. Prefer local pick-up as shipping is a pain.
However, if necessary, shipping at cost.
I am in Mississauga, just west of Toronto , Ontario.
Please email or phone direct without disturbing all the T-ABC members again.
Thanks, Bob
Bob Grunau
150 Pinewood Trail
Mississauga, Ontario
Canada, L5G-2L1
905-274-4136
grunau.garage@sympatico.ca
-----Original Message-----
From: mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com]On Behalf Of
FDShade@aol.com
Sent: Tuesday, October 11, 2011 9:15 PM
To: mg-tabc@yahoogroups.com
Subject: [mg-tabc] Update from Jim
Welcome to our 1148th member
Carruthers, Peter ----plcarruthers@verizon.net ------ Rye, NY, USA
1948 TC 6717 ENGNE # UNKNOWN
who writes
At this point the body has been completely rebuilt including the wood. The
body is awaiting primer and paint ( probably Mazda Melano Red) The
drivetrain including engine, transmission, shocks, steering rack and
rear-end are
finished. The body and drivetrain are in different locations however. I
cleaned, sandblasted, primed and painted the frame and primed 4 wheels.
Most if not all chrome bits are in my garage. So at his point I am looking
for 2 19 wheels as the cost for new wheels ( at Moss) is a little steep. I
am also in the process of trying to finish the dashboard.
=== and - That's it for now from
Jim Shade, West Covina CA, USA
[Non-text portions of this message have been removed]
-
- Posts: 313
- Joined: Wed Jul 19, 2000 3:42 am
Re: Update from Jim
I too have access to some rims here in New York so if interested contact me off list
joecurto@aol.com
718 762-SUSU/7878
JOe-----Original Message-----
From: BOB GRUNAU
To: FDShade ; mg-tabc
Cc: plcarruthera
Sent: Wed, Oct 12, 2011 7:25 am
Subject: RE: [mg-tabc] Update from Jim
Hi Peter and other T-ABC members,
I have 19" rolled rim center and outer laced good used wire wheels for sale
to suit the TC and TA/TB as well as MMM cars @ $100.00 each.
You choose, you clean and paint. Prefer local pick-up as shipping is a pain.
However, if necessary, shipping at cost.
I am in Mississauga, just west of Toronto , Ontario.
Please email or phone direct without disturbing all the T-ABC members again.
Thanks, Bob
Bob Grunau
150 Pinewood Trail
Mississauga, Ontario
Canada, L5G-2L1
905-274-4136
grunau.garage@sympatico.ca
-----Original Message-----
From: mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com]On Behalf Of
FDShade@aol.com
Sent: Tuesday, October 11, 2011 9:15 PM
To: mg-tabc@yahoogroups.com
Subject: [mg-tabc] Update from Jim
Welcome to our 1148th member
Carruthers, Peter ----plcarruthers@verizon.net ------ Rye, NY, USA
1948 TC 6717 ENGNE # UNKNOWN
who writes
At this point the body has been completely rebuilt including the wood. The
body is awaiting primer and paint ( probably Mazda Melano Red) The
drivetrain including engine, transmission, shocks, steering rack and
rear-end are
finished. The body and drivetrain are in different locations however. I
cleaned, sandblasted, primed and painted the frame and primed 4 wheels.
Most if not all chrome bits are in my garage. So at his point I am looking
for 2 19 wheels as the cost for new wheels ( at Moss) is a little steep. I
am also in the process of trying to finish the dashboard.
=== and - That's it for now from
Jim Shade, West Covina CA, USA
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
joecurto@aol.com
718 762-SUSU/7878
JOe-----Original Message-----
From: BOB GRUNAU
To: FDShade ; mg-tabc
Cc: plcarruthera
Sent: Wed, Oct 12, 2011 7:25 am
Subject: RE: [mg-tabc] Update from Jim
Hi Peter and other T-ABC members,
I have 19" rolled rim center and outer laced good used wire wheels for sale
to suit the TC and TA/TB as well as MMM cars @ $100.00 each.
You choose, you clean and paint. Prefer local pick-up as shipping is a pain.
However, if necessary, shipping at cost.
I am in Mississauga, just west of Toronto , Ontario.
Please email or phone direct without disturbing all the T-ABC members again.
Thanks, Bob
Bob Grunau
150 Pinewood Trail
Mississauga, Ontario
Canada, L5G-2L1
905-274-4136
grunau.garage@sympatico.ca
-----Original Message-----
From: mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com]On Behalf Of
FDShade@aol.com
Sent: Tuesday, October 11, 2011 9:15 PM
To: mg-tabc@yahoogroups.com
Subject: [mg-tabc] Update from Jim
Welcome to our 1148th member
Carruthers, Peter ----plcarruthers@verizon.net ------ Rye, NY, USA
1948 TC 6717 ENGNE # UNKNOWN
who writes
At this point the body has been completely rebuilt including the wood. The
body is awaiting primer and paint ( probably Mazda Melano Red) The
drivetrain including engine, transmission, shocks, steering rack and
rear-end are
finished. The body and drivetrain are in different locations however. I
cleaned, sandblasted, primed and painted the frame and primed 4 wheels.
Most if not all chrome bits are in my garage. So at his point I am looking
for 2 19 wheels as the cost for new wheels ( at Moss) is a little steep. I
am also in the process of trying to finish the dashboard.
=== and - That's it for now from
Jim Shade, West Covina CA, USA
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
-
- Posts: 0
- Joined: Mon Nov 29, 1999 3:14 pm
Update from Jim
Welcome to our 1149th member
Lange, John --- j.lange@madisonservices.com ------ Jackson, MS, USA
1949 TC 7398 EXU XPAG 8181
who writes
I purchased the car in 1995 from an individual who bought it about 1960.
He disassembled the entire care and had plans to restore it. When I
bought the car, it was in boxes and bags, having been disassembled for 35 years.
With a lot of help from Keith Anderson, an MG enthusiast, the local
British Motoring Club and from Mike Lewis of the (original) Mardi Gras Ts in
New Orleans, we got the car back in great shape.
(John has sent a photo of his car, which will be posted in the Gallery)
=== and - just for those who might have missed Bob and Lynn Douglas' trek
across the continent
take a look at _http://www.tcthewanderer.com/_
(http://www.tcthewanderer.com/)
=== and - that's it for now from
Jim Shade
West Covina CA, USA
[Non-text portions of this message have been removed]
Lange, John --- j.lange@madisonservices.com ------ Jackson, MS, USA
1949 TC 7398 EXU XPAG 8181
who writes
I purchased the car in 1995 from an individual who bought it about 1960.
He disassembled the entire care and had plans to restore it. When I
bought the car, it was in boxes and bags, having been disassembled for 35 years.
With a lot of help from Keith Anderson, an MG enthusiast, the local
British Motoring Club and from Mike Lewis of the (original) Mardi Gras Ts in
New Orleans, we got the car back in great shape.
(John has sent a photo of his car, which will be posted in the Gallery)
=== and - just for those who might have missed Bob and Lynn Douglas' trek
across the continent
take a look at _http://www.tcthewanderer.com/_
(http://www.tcthewanderer.com/)
=== and - that's it for now from
Jim Shade
West Covina CA, USA
[Non-text portions of this message have been removed]
-
- Posts: 0
- Joined: Mon Nov 29, 1999 3:14 pm
Update from Jim
Dave Sarley joined the T-ABC December 8, 2007. At the time, he did not
own a T car, BUT today he wrote:
I have been a member since this email below and yesterday, finally was able
to purchase a 1947 TC. Chassis TC 2820. Production records indicate the
car was built 20 May 1947 and first commissioned 2nd June 1947. The original
engine, XPAG 3432 was replaced in 1969 with a Gold Seal engine, #C70492.
The TC was purchased and imported to the US in 1972 by David Millar, Jr.
(the original Marlboro Man) of Meriden, NH. In 1974 Millar sold the TC to
Chandler Perkins of New London, NH. The car was restored over a four year
period from 1979 to 1983. The comes to me with a package of information
including a number of receipts for work done in the Manchester, UK at Archway
Engineering, Ltd. Also included was the cars Vehicles (Excise) Act, 1962,
Registration Book dating from 1964 through 1972
Sooooooooooooo CONGRATUALTIONS DAVE
Sarley,Dave ------- dmsarley@comcast.net --- Berwyn, PA, USA
1947 TC 2820 #C70492 (orig XPAG 3432)
[Non-text portions of this message have been removed]
own a T car, BUT today he wrote:
I have been a member since this email below and yesterday, finally was able
to purchase a 1947 TC. Chassis TC 2820. Production records indicate the
car was built 20 May 1947 and first commissioned 2nd June 1947. The original
engine, XPAG 3432 was replaced in 1969 with a Gold Seal engine, #C70492.
The TC was purchased and imported to the US in 1972 by David Millar, Jr.
(the original Marlboro Man) of Meriden, NH. In 1974 Millar sold the TC to
Chandler Perkins of New London, NH. The car was restored over a four year
period from 1979 to 1983. The comes to me with a package of information
including a number of receipts for work done in the Manchester, UK at Archway
Engineering, Ltd. Also included was the cars Vehicles (Excise) Act, 1962,
Registration Book dating from 1964 through 1972
Sooooooooooooo CONGRATUALTIONS DAVE
Sarley,Dave ------- dmsarley@comcast.net --- Berwyn, PA, USA
1947 TC 2820 #C70492 (orig XPAG 3432)
[Non-text portions of this message have been removed]
-
- Posts: 8
- Joined: Fri Jan 07, 2005 2:33 pm
Re: Update from Jim
Congratulations Dave on your celebrity TC. Suggest "SMOKIN!" as a vanity
plate.
Bob Brennan
S. Freeport, ME
[Non-text portions of this message have been removed]
plate.
Bob Brennan
S. Freeport, ME
[Non-text portions of this message have been removed]
-
- Posts: 0
- Joined: Mon Nov 29, 1999 3:14 pm
Update from Jim
Welcome to our 1150th member
Palmer,Ken,kencarolpalmer@sbcglobal.net,San Luis Obispo,CA,USA,1939,TA
0625 eng# unk
who writes:
Wanted: Right front fender for early TA. Deep cut back, Narrow version.
I have "discovered" I have one narrow and one wide. The left, wide one,
is in good shape if anyone is interested. Alternately-- anyone had
expereince in "sectioning" a wide fender to narrow it? Thanks, Ken Palmer
kencarolpalmer@sbcglobal.net
=== and - TIFN from
Jim Shade
West Covina CA, USA
[Non-text portions of this message have been removed]
Palmer,Ken,kencarolpalmer@sbcglobal.net,San Luis Obispo,CA,USA,1939,TA
0625 eng# unk
who writes:
Wanted: Right front fender for early TA. Deep cut back, Narrow version.
I have "discovered" I have one narrow and one wide. The left, wide one,
is in good shape if anyone is interested. Alternately-- anyone had
expereince in "sectioning" a wide fender to narrow it? Thanks, Ken Palmer
kencarolpalmer@sbcglobal.net
=== and - TIFN from
Jim Shade
West Covina CA, USA
[Non-text portions of this message have been removed]
Who is online
Users browsing this forum: No registered users and 7 guests