-
Walter Prechsl privat
- Posts: 60
- Joined: Sun Feb 25, 2001 3:05 am
Post
by Walter Prechsl privat » Wed May 08, 2002 1:24 pm
i ll forward this to the "list" - walter
________________________________________________________________________
From: "Rourke O'Brien" rourkeo@irikarting.com>
To: walter@publi-consult.com>
Sent: Tuesday, May 07, 2002 10:43 PM
Subject: Question
> I'm not quite sure where to send this so maybe you could help me. I have
a
> 1948 TC and the reflective material around the headlamps. Does anyone
know
> how/where I can have these redone?
>
> Rourke O'Brien
> Indy Racing Indoor Karting
>
rourkeo@irikarting.com
> 206-915-6958
>
>
-
BobAlley747@aol.com
- Posts: 29
- Joined: Tue Mar 26, 2002 9:51 am
Post
by BobAlley747@aol.com » Fri Apr 22, 2005 8:50 am
What is the purpose of the felt material between the gas tank and the side
panels? What is a good substitute?
Thanks Bob
TC 6198 almost back on the road after 35 years.
[Non-text portions of this message have been removed]
-
Skip Kelsey
- Posts: 153
- Joined: Thu Dec 30, 1999 2:57 am
Post
by Skip Kelsey » Fri Apr 22, 2005 11:34 am
Bob:
It was supposed to stop vibration. Actually, all it does is soak up
moisture, cause rust on the side of the tank. Eventually it will rust a
hole in said tank. I had this almost happen too mine. I left the pads out
after this experience.
Skip Kelsey.....................................................
At 11:49 AM 4/22/2005 -0400,
BobAlley747@aol.com wrote:
>What is the purpose of the felt material between the gas tank and the side
>panels? What is a good substitute?
>Thanks Bob
>TC 6198 almost back on the road after 35 years.
>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
-
John Seim
- Posts: 57
- Joined: Sun Jan 09, 2000 2:12 pm
Post
by John Seim » Fri Apr 22, 2005 1:21 pm
As Skip has said, it was a vibration damper. You wouldn't want to hear
those end panels vibrate.
Home Depot and others sell a blue woven fiber mat, for air conditioning
filters. (Oddly enough, it also looks just like the horsehair pad that
Moss sells for seat back padding). Other foam with adhesive backed
products available for weatherstrip sealing. You should be able to find
something suitable.
John Seim
Irvine, CA
BobAlley747@aol.com wrote:
>What is the purpose of the felt material between the gas tank and the side
>panels? What is a good substitute?
>Thanks Bob
>TC 6198 almost back on the road after 35 years.
>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
-
Gene Gillam
- Posts: 215
- Joined: Tue Feb 01, 2000 4:09 pm
Post
by Gene Gillam » Fri Apr 22, 2005 6:01 pm
-----Original Message-----
Subject: [mg-tabc] Re: Question
I have corrected your document.
[Non-text portions of this message have been removed]
That was mighty nice of you..
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 4/21/2005
-
David Lodge
- Posts: 156
- Joined: Mon Oct 15, 2007 5:44 pm
Post
by David Lodge » Sat Apr 23, 2005 12:31 pm
Hello Bob, Skip,
A bloke I know epoxied on his felt pads and then soaked them in
oil for that very reason.
Regards, David Lodge
----- ORIGINAL MESSAGE -----
From: "Skip Kelsey" kelsey@value.net>
To:
BobAlley747@aol.com,
mg-tabc@yahoogroups.com
Subject: Re: [mg-tabc] Question
Date: 22.4.2005 - 20:34:36
>
> Bob:
>
> It was supposed to stop vibration. Actually, all it
> does is soak up
> moisture, cause rust on the side of the tank.
> Eventually it will rust a
> hole in said tank. I had this almost happen too mine. I
> left the pads out
> after this experience.
>
> Skip
> Kelsey.....................................................
>
>
>
> At 11:49 AM 4/22/2005 -0400,
BobAlley747@aol.com wrote:
>
> >What is the purpose of the felt material between the
> >gas tank and the side
> >panels? What is a good substitute?
> >Thanks Bob
> >TC 6198 almost back on the road after 35 years.
> >
> >
> >[Non-text portions of this message have been removed]
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
--
Zkou ejte vysokorychlostn nonstop internet VOLN ADSL 14 dn
ZDARMA! Ji d le nev hejte! Prvn ch 500 z kazn k nav c z sk
tri ko.
V ce informac na
http://adsl.volny.cz/adsl-na-zkousku/
-
Skip Kelsey
- Posts: 153
- Joined: Thu Dec 30, 1999 2:57 am
Post
by Skip Kelsey » Sat Apr 23, 2005 12:44 pm
David:
I opted to leave the pads out, and have not noticed any vibration or other
noise.
Skip...................................................................
At 09:31 PM 4/23/2005 +0200, David Lodge wrote:
>Hello Bob, Skip,
>
>A bloke I know epoxied on his felt pads and then soaked them in
>oil for that very reason.
>
>Regards, David Lodge
>
>
>----- ORIGINAL MESSAGE -----
>From: "Skip Kelsey" kelsey@value.net>
>To:
BobAlley747@aol.com,
mg-tabc@yahoogroups.com
>Subject: Re: [mg-tabc] Question
>Date: 22.4.2005 - 20:34:36
>
> >
> > Bob:
> >
> > It was supposed to stop vibration. Actually, all it
> > does is soak up
> > moisture, cause rust on the side of the tank.
> > Eventually it will rust a
> > hole in said tank. I had this almost happen too mine. I
> > left the pads out
> > after this experience.
> >
> > Skip
> > Kelsey.....................................................
> >
> >
> >
> > At 11:49 AM 4/22/2005 -0400,
BobAlley747@aol.com wrote:
> >
> > >What is the purpose of the felt material between the
> > >gas tank and the side
> > >panels? What is a good substitute?
> > >Thanks Bob
> > >TC 6198 almost back on the road after 35 years.
> > >
> > >
> > >[Non-text portions of this message have been removed]
> > >
> > >
> > >
> > >
> > >Yahoo! Groups Links
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>--
>Zkou ejte vysokorychlostn nonstop internet VOLN ADSL 14 dn
>ZDARMA! Ji d le nev hejte! Prvn ch 500 z kazn k nav c z sk
>tri ko.
>V ce informac na
http://adsl.volny.cz/adsl-na-zkousku/
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
Users browsing this forum: No registered users and 14 guests