EXU question

[candahill@worldnet.att.net]

Bill, if you are referring to the right hand side just in front of the regulator, it is the front mounting hole for the old style larger regulator. Its on all TCs, not just EXUs Regards, Charles Hill

> Gents and Ladies with EXU models... > > What is your use (and possibly the correct use) for the hole that is right > behind the near side horn mount on the batt box?? > Thanks, > > Bill Tantau > TC EXU 7606 > PA 1688 > PB 0530 > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >

[Bill]

On Wednesday, August 20, 2003, at 02:05 PM, candahill@att.net wrote:

> Bill, if you are referring to the right hand side just in front of the > regulator, it is the front mounting hole for the old style larger > regulator. > Its on all TCs, not just EXUs

No... near side (left). bt

[Bill]

On Wednesday, August 20, 2003, at 11:18 AM, Koesten, Stewart wrote:

> I believe there was a hole in the EXU where a former style (used on TA/TB) > voltage regulator used to be.

This a single hole to the left of the plates on the near side. bt

[Charles Hill]

Bill wrote:

> > On Wednesday, August 20, 2003, at 02:05 PM, candahill@att.net wrote: > >> Bill, if you are referring to the right hand side just in front of the >> regulator, it is the front mounting hole for the old style larger >> regulator. >> Its on all TCs, not just EXUs > > > No... near side (left). > bt >

Bill, the only holes on the left side are for the EXU horn bracket, the various ID plates and the (Positive) ground cable for the battery. Outside of the horn mount, no difference from any other export TC. Home model TCs will not have holes for the "Made in England" plate. Regards, Charles Hill

[Michael L. Stokes]

Charles Hill said:

> Bill wrote: >> >> On Wednesday, August 20, 2003, at 02:05 PM, candahill@att.net wrote: >> >>> Bill, if you are referring to the right hand side just in front of the >>> regulator, it is the front mounting hole for the old style larger >>> regulator. >>> Its on all TCs, not just EXUs >> >> >> No... near side (left). >> bt >> > > Bill, the only holes on the left side are for the EXU horn bracket, the > various ID plates and the (Positive) ground cable for the battery.

Charles, where is the ground cable relative to the EXU horn bracket? Thanks Mike

> Outside of the horn mount, no difference from any other export TC. Home > model TCs will not have holes for the "Made in England" plate. > > Regards, > Charles Hill > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >

[Bill]

On Wednesday, August 20, 2003, at 07:57 PM, Charles Hill wrote:

> Bill, the only holes on the left side are for the EXU horn bracket, the > various ID plates and the (Positive) ground cable for the battery. > Outside of the horn mount, no difference from any other export TC. Home > model TCs will not have holes for the "Made in England" plate.

So.. the hole, which is between the horn mount holes and the ID plates is for the battery ground strap? bt