-
Mark McCombs
- Posts: 117
- Joined: Sat Nov 27, 1999 4:38 pm
Post
by Mark McCombs » Thu Apr 12, 2001 7:44 pm
Hi, Troops-
What is the general consensus re: body felt inbetween the inner fenders and the body irons?
I found some synthetic felt that is identical in size to my disengrated original, but things seem too tight to fit. This stuff is easily compressable, but is 3/16" thick. Too thick? Any other suggested materials?
Thanks and Regards,
Mark TC8126
-
CFritz7001@aol.com
- Posts: 129
- Joined: Mon May 14, 2001 1:58 pm
Post
by CFritz7001@aol.com » Thu Apr 12, 2001 8:08 pm
Mark,
Since I could not find the felt stuff when I need it I used rubberized
cork gasket material. It does not absorb water as felt does, lasts
practically forever, and is available at good parts houses in various
thicknesses. If necessary, it can be painted or "magic-markered" to hide its
tannish color.
Regards,
Carl Fritz
TC #6756
Gainesville, Florida
-
C Sherriff
- Posts: 147
- Joined: Tue Mar 20, 2001 12:35 am
Post
by C Sherriff » Fri Apr 13, 2001 12:34 am
Message text written by "Mark McCombs"
>What is the general consensus re: body felt inbetween the inner fenders
and the body irons?
I found some synthetic felt that is identical in size to my disengrated
original, but things seem too tight to fit. This stuff is easily
compressable, but is 3/16" thick. Too thick? Any other suggested
materials?
Users browsing this forum: No registered users and 16 guests