> > There is now another source for the famous eccentic adjustment plate - > doohickey - made of a different material (IMHO better), that comes > with a MUCH better spring than has been available before. check out > http://www.fayettemotorcycles.com/fayette-motorcycles/ go to Zen > motorcycle products. > > happy Friday! > > Mike >
oil filters
-
- Posts: 2322
- Joined: Thu May 10, 2001 9:41 am
doohickey
Competition is always good. Perhaps this will speed up the production
line at Sagebrushmachine a notch. I have one questions-
In your opinion, why is stainless steel better? Most grades of stainless
are not as strong as a good tool steel, and the Sagebrush hardened 4130
doohickey is a good bit harder than that. It's living inside a 200deg
oil bath, why stainless?
Devon
A15
wannabsmooth1 wrote:
-
- Posts: 377
- Joined: Sun Dec 02, 2001 7:33 pm
doohickey
How does the Zen spring differ from Jake's? Or are you saying that's it's
much better than the stock spring?
Karl
A14
> There is now another source for the famous eccentic adjustment plate - > doohickey - made of a different material (IMHO better), that comes > with a MUCH better spring than has been available before. check out > http://www.fayettemotorcycles.com/fayette-motorcycles/ go to Zen > motorcycle products. > > happy Friday! > > Mike > > > List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy > of Chris Krok at: www.bigcee.com/klr650faq.html > Unsubscribe by sending a blank message to: > DSN_klr650-unsubscribe@yahoogroups.com . > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >
-
- Posts: 1897
- Joined: Fri Apr 28, 2000 7:50 am
doohickey
On Fri, 2002-10-11 at 16:09, Devon Jarvis wrote:
stainless> > In your opinion, why is stainless steel better? Most grades of
4130> are not as strong as a good tool steel, and the Sagebrush hardened
Speaking of which, the pics they have up for the "two" different type of levers is wrong... Their pic of the pre1996s is really only valid for A1's and A2's, my A5, stock, had a weldment like every other year. Nothing big. And speaking of using SS inside an oil bath, perhaps thats why their kit costs $65?? Z> doohickey is a good bit harder than that. It's living inside a 200deg > oil bath, why stainless? > > Devon > A15 > >
-
- Posts: 907
- Joined: Thu Apr 06, 2000 3:10 pm
doohickey
Why would someone choose a 37mm spring or a 40 mm spring (their order form forces you to choose)?
Kurt
There is now another source for the famous eccentic adjustment plate - doohickey - made of a different material (IMHO better), that comes with a MUCH better spring than has been available before. check out http://www.fayettemotorcycles.com/fayette-motorcycles/ go to Zen motorcycle products. happy Friday! Mike List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html Unsubscribe by sending a blank message to: DSN_klr650-unsubscribe@yahoogroups.com . Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/>>> wannabsmooth1 10/11/2002 1:40:45 PM >>>
-
- Posts: 3355
- Joined: Sat Dec 15, 2001 3:37 pm
doohickey
Holy Smoking Pile of Cow Dung Batman... $62 bucks...
Jake please be kind to us.
Dooden
--- In DSN_klr650@y..., "wannabsmooth1" wrote: > There is now another source for the famous eccentic adjustment plate - > doohickey - made of a different material (IMHO better), that comes > with a MUCH better spring than has been available before. check out > http://www.fayettemotorcycles.com/fayette-motorcycles/ go to Zen > motorcycle products. > > happy Friday! > > Mike
-
- Posts: 68
- Joined: Wed May 01, 2002 10:46 pm
doohickey
When I bought my main KLR 2 years ago I panicked and went for a new
Doohicky. The bike had had a rough life so I assumed it was going to
grenade any minute because it had 16,000 miles on it.
So I bought the new part numbered parts from KHI. I got a new doohichy
and spring and washer and adjuster bolt and even went for new gaskets.
Everything was fine in the motor. It was all still working and there
was a lot of adjustment left but I replaced it all anyway and the new
doohickey was a little stouter as was the spring. The washer under the
adjustment bolt helped to spread the load better. So I buttoned it up
and I adjust it regularly. I let other people ride this bike and I am
about to let my wife practice on it after she finishes her MSF course.
SO at 23,500 miles it still purrs and has not Sploded@!!!!!
This morning I want ed to go for a ride. I suited up and fired up this
bike and took off. About a mile from home I stopped at a stop sigh and
then proceeded.Before I could shift to 2nd it died. Just dead. I
stopped and fiddled but it was starting to sprinkle so I coasted and
walked it home. Took all the body work and tank off and pulled the
plug. I have spark,,,,,I have gas....I have compression...hmmmmmm. So
I blow on the vent tube to the carb and fiddle around with other
stuff.
Then it fires and idles fine after a minute. Crap in the carb. I
drained the bowl and blew through the vent again and all is
well.....I guess it didn't want to leave the house today.I Had pulled
the carb a while ago and cleaned it all up and installed filter in
line but still some thing got in.
Tom Baumen
-
- Posts: 152
- Joined: Tue Jan 30, 2001 7:13 am
doohickey
Great idea, Russell - wait until she breaks!!!
My '99 imploded in the desert in the Baja last spring (10,000 mi.) took out the tranny, and the head, plus I had a nice time getting me and the bike back to Canada. At the time, the "doohickey" issue was a lot smaller, and I wasn't aware of the problem.
Now, we are all aware of the problem, and we know how catastrophic a failure can be, but, if you choose to ignore it, I assume you are over the age of 21!
Murray Dochstader B.C. Canada.
[Non-text portions of this message have been removed]
-
- Posts: 152
- Joined: Tue Jan 30, 2001 7:13 am
doohickey
Pete:
I think you have hit the proverbial "nail - on - the - head" with your observations, especially with respect to the spring. It was never intended to be part of the actual tensioner - it is there to reposition the doohickey when the adjuster bolt is loosened.
When my motor lunched (last March), Jake's doohickey was available, but there was no aftermarket spring, so I used a Kaw. spring, and I have had no problem with it, presumably, because Jake's doohickey leaves no slack in the system when it is adjusted properly.
Hopefully Mother Kaw. is lurking on this list and will address this important (and cheap for them to fix) problem.
Murray Dochstader B.C. Canada.
[Non-text portions of this message have been removed]
doohickey
--- In DSN_klr650@yahoogroups.com, "trenthackinen "
wrote:
No, do it yourself.> When I buy my bikes, do I make the dealer put in a aftermarket > doohickey?
Moot> What should he charge for doing this?
Not "count on seizing up" but the odds are you'll need to replace it sooner or later, effects of failure vary from a noisy balancer chain to total engine failure.> If I don't have > this done, can I count on seizing up?
I didn't, some do. Matter of opinion.> Should I buy extended warranty?
Humble servant give humble opinion. Many Thanks and Good Ruck CA Stu A13> Thanks to everyone for the info.
Who is online
Users browsing this forum: No registered users and 26 guests