----- Original Message ----- From: "Robin Van Eyk" Subject: [DSN_klr650] Scottoiler Has anyone ever installed this on their bike? I would like > to hear any feedback, good or bad.
"overland journal" magazine
-
- Posts: 7
- Joined: Sat Oct 07, 2000 9:59 am
scottoiler
I have the touring version mounted on my KLR. It works as advertised, my
chain is clean and I really like not having to worry about cleaning or
lubing the chain on a regular basis. I have the reservoir mounted on the
left side of the rear fender behind my side rack. The first mounting system
I built did not hold up well to the vibration encountered on a trip to Ft
Ware but my new mount should be sturdier. Also, I had to move the feed tube
from the top of the swing arm to the bottom to keep it in contact with the
sprocket. I think there are pictures on the list web-site.
scottoiler
Robin wrote:
I've been thinking about getting one of the automatic chain oilers as
my next 'mod' to my bike, and I was looking at the Scottoiler. It is
supposed to work off the vacuum of the engine, without affecting
performance. Yet it will dispense a metered amount of oil directly to
the chain. Has anyone ever installed this on their bike? I would like
to hear any feedback, good or bad.
I keep hearing those Scottoilers really work well, and I know they
do--great product----and yes they do work off the vacuum of your
engine---and no they don't affect engine performance. They work just like
the fuel petcock on your KLR. They just take a little vacuum when the engine
is running to open them up.
These things are fine----however I'll just give you my opinion why I don't
want one on my bike-----chain lubing is very easy and quick and I don't want
another gizzmo on my bike to take care of such a simple matter. Just a
personal preference-----I would rather spend 30 seconds a day lubing my
chain than have the automatic oiler--buying it--installing it---the extra
weight--maintaning it, etc. Part of my keep it simple strategy.
Also-------if you still want one-----I would really think again if you ride
offroad much---it might not take the abuse or you might tear it up----just
something to think about.
I'm sure others will give you many reasons for having one-----so you decide
!!!
Mark Sampson
www.bigdogadventures.com
-
- Posts: 2322
- Joined: Thu May 10, 2001 9:41 am
scottoiler
Mark Sampson wrote:
snip
snip> > I keep hearing those Scottoilers really work well, and I know they > do--great product----and yes they do work off the vacuum of your > engine---and no they don't affect engine performance.
I used a Scottoiler for 13,500mi on my A15. I loved it, it was really convenient and it will make your chain longer ON THE STREET. What Mark says about offroading is right, serious trails or woods can mess it up. Never seriously, never expensive to fix, usually just losing the last 2" drip feed tube. I always carried a spare in my toolkit anyway. But the constant tinkering meant it wasn't less work than just oiling the chain whenever I filled up with gas. Also, it kept the chain and rear sprocket very clean. But not the countershaft sprocket, so these would wear out quickly. The chain was worn so the rollers jingled like a charm bracelet, though the o-rings were in perfect shape, no tight links or other problems, and the rear sprocket was maybe 50% gone by 13,500mi. BUT I went through three countershaft sprockets in that time. If you stayed out of mud and sand this wouldn't be a problem. So, if I was setting up a KLR for 95-100% street usage I would re-install my scottoiler. Until I do that, lots of WD40 and the odd bit of chainsaw oil will do. Devon "It's a troublesome world, all the people who are in it, are troubled with troubles almost every minute" Dr. Seuss> Also-------if you still want one-----I would really think again if you ride > offroad much---it might not take the abuse or you might tear it up----just > something to think about. >
-
- Posts: 2759
- Joined: Thu Apr 06, 2000 2:04 pm
scottoiler
I agree with the dog. Also - seems to me - that with an o-ring cleaning is just as important as lubing. While a steady drip of oil will clean some it won't do what a blast of good ole WD does. Bogdan> These things are fine----however I'll just give you my opinion why > I don't > want one on my bike-----chain lubing is very easy and quick and I don't > want > another gizzmo on my bike to take care of such a simple matter. > Mark Sampson > www.bigdogadventures.com >
-
- Posts: 1037
- Joined: Sun Sep 29, 2002 11:52 am
scottoiler
I've been dribbling 90wt on my chain via a Loobman, a squeeze
on the reservoir bottle every couple hundred miles. After running
on gravel or offroad, I clean the chain with a grunge brush and
wd40.. I'm not pounding over rocks and stuff, but the Loobman
has remained in place through a lot of brush and 2-track, and is
a fourth the cost of the scottoiler.
--- In DSN_klr650@yahoogroups.com, "Bogdan Swider"
wrote:
why> > > > > These things are fine----however I'll just give you my opinion
and I don't> > I don't > > want one on my bike-----chain lubing is very easy and quick
matter.> > want > > another gizzmo on my bike to take care of such a simple
cleaning is> > Mark Sampson > > www.bigdogadventures.com > > > I agree with the dog. Also - seems to me - that with an o-ring
some it> just as important as lubing. While a steady drip of oil will clean
> won't do what a blast of good ole WD does. > > Bogdan
-
- Posts: 1442
- Joined: Tue Jan 21, 2003 7:59 pm
scottoiler
In a message dated 2003-05-09 6:29:55 AM Pacific Daylight Time,
jarvisd@... writes:
If you just stayed out of the sand and mud ... Thats why I haven't gotten to excited about the automatic chain oilers. I spend enough time off pavement that the oiler is more hassle than its worth. From the old days of dirt biking, there is one sure fire solution for one of you mechanical geniuses to figure out. That would be the enclosed chain. Back in the 60's and 70's most European Enduro bikes - dirt bikes with lights, also came with enclosed chains. I've still got a few old magazines with reviews of those bikes and the one thing they all said, chain life was phenomenal. Pat G'ville, Nv [Non-text portions of this message have been removed]> > Also, it kept the chain and rear sprocket very clean. But > not the countershaft sprocket, so these would wear out > quickly. The chain was worn so the rollers jingled like a > charm bracelet, though the o-rings were in perfect shape, no > tight links or other problems, and the rear sprocket was > maybe 50% gone by 13,500mi. BUT I went through three > countershaft sprockets in that time. If you stayed out of > mud and sand this wouldn't be a problem. > > So, if I was setting up a KLR for 95-100% street usage I > would re-install my scottoiler. Until I do that, lots of > WD40 and the odd bit of chainsaw oil will do. > > Devon > >
-
- Posts: 310
- Joined: Tue Aug 27, 2002 5:34 pm
scottoiler
In the time of wonderfully strong and o-ringed chains, you would need to be a pretty lazy Fu*k to lay out money on a Scottoiler. Just my .02 Dave A12
kdxkawboy@... wrote:In a message dated 2003-05-09 6:29:55 AM Pacific Daylight Time,
jarvisd@... writes:
If you just stayed out of the sand and mud ... Thats why I haven't gotten to excited about the automatic chain oilers. I spend enough time off pavement that the oiler is more hassle than its worth. From the old days of dirt biking, there is one sure fire solution for one of you mechanical geniuses to figure out. That would be the enclosed chain. Back in the 60's and 70's most European Enduro bikes - dirt bikes with lights, also came with enclosed chains. I've still got a few old magazines with reviews of those bikes and the one thing they all said, chain life was phenomenal. Pat G'ville, Nv [Non-text portions of this message have been removed] List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html Unsubscribe by sending a blank message to: DSN_klr650-unsubscribe@yahoogroups.com . Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ --------------------------------- Do you Yahoo!? The New Yahoo! Search - Faster. Easier. Bingo. [Non-text portions of this message have been removed]> > Also, it kept the chain and rear sprocket very clean. But > not the countershaft sprocket, so these would wear out > quickly. The chain was worn so the rollers jingled like a > charm bracelet, though the o-rings were in perfect shape, no > tight links or other problems, and the rear sprocket was > maybe 50% gone by 13,500mi. BUT I went through three > countershaft sprockets in that time. If you stayed out of > mud and sand this wouldn't be a problem. > > So, if I was setting up a KLR for 95-100% street usage I > would re-install my scottoiler. Until I do that, lots of > WD40 and the odd bit of chainsaw oil will do. > > Devon > >
-
- Posts: 581
- Joined: Wed Nov 28, 2001 8:42 pm
scottoiler
Having a Scottoiler, or any mounted chain fluid system, shouldn't preclude
all other chain care activity. While being a chain care aid, it is not an
all-in-one set-it-and-forget-it panacea. Riding off-road is going to shorten
your chain and sprocket life. A Scottoiler just makes minimizing chain and
sprocket wear easier.
I would never do an extensive trip, especially including off-road,
without taking a can of WD40 along. This is what I use to prime a dry chain
(such as after a water crossing or washing) before oiling, it's what I use
to clean my chain and sprockets when needed (after most off-road forays),
it's what I use to clean and lubricate cables while out and about, can be
used to prime the CDI and other electrical components when corroded,
waterlogged, or dirty. Plus it's the one item that I get asked for most when
riding with others, giving me that warm fuzzy feeling that I'm of value to
the tribe.
When you've come to the end of an extensive off-road sojourn and are
about to embark on many miles of pavement, it's a good idea to get off the
bike and do a WD40 spritz-down on the drive system while inspecting it and
the tire pressure (probable airing-up), rims, axle nuts, engine oil leaks,
control and cable function and lube, steering alignment and fastener
security. I'm off the bike and down there looking anyway, so this makes good
use of the time spent there.
Once the chain is clean or primed, an auto-oiler is useful for lubing
it from there on through the rest of the trip. For all-road trips, it can
become the nearly exclusive center piece of your chain care system.
Chain drive systems require hands-on maintenance. For those who don't
want to futz around with a chain at all can always get a Beemer
shaftie.........
The Mule
----- Original Message ----- From: "david gay" To: ; ; DSN_klr650@yahoogroups.com> Sent: Friday, May 09, 2003 11:29 PM Subject: Re: [DSN_klr650] Scottoiler > In the time of wonderfully strong and o-ringed chains, you would need to be a pretty lazy Fu*k to lay out money on a Scottoiler. Just my .02 Dave A12 > > kdxkawboy@... wrote:In a message dated 2003-05-09 6:29:55 AM Pacific Daylight Time, > jarvisd@... writes: > > > > > Also, it kept the chain and rear sprocket very clean. But > > not the countershaft sprocket, so these would wear out > > quickly. The chain was worn so the rollers jingled like a > > charm bracelet, though the o-rings were in perfect shape, no > > tight links or other problems, and the rear sprocket was > > maybe 50% gone by 13,500mi. BUT I went through three > > countershaft sprockets in that time. If you stayed out of > > mud and sand this wouldn't be a problem. > > > > So, if I was setting up a KLR for 95-100% street usage I > > would re-install my scottoiler. Until I do that, lots of > > WD40 and the odd bit of chainsaw oil will do. > > > > Devon > > > > > > If you just stayed out of the sand and mud ... > > Thats why I haven't gotten to excited about the automatic chain oilers. I > spend enough time off pavement that the oiler is more hassle than its worth. > From the old days of dirt biking, there is one sure fire solution for one of > you mechanical geniuses to figure out. That would be the enclosed chain. Back > in the 60's and 70's most European Enduro bikes - dirt bikes with lights, > also came with enclosed chains. I've still got a few old magazines with > reviews of those bikes and the one thing they all said, chain life was > phenomenal. > > Pat > G'ville, Nv > > > [Non-text portions of this message have been removed] > > > List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Unsubscribe by sending a blank message to: > DSN_klr650-unsubscribe@yahoogroups.com . > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > --------------------------------- > Do you Yahoo!? > The New Yahoo! Search - Faster. Easier. Bingo. > > [Non-text portions of this message have been removed] > > > List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Unsubscribe by sending a blank message to: > DSN_klr650-unsubscribe@yahoogroups.com . > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >
-
- Posts: 130
- Joined: Fri Mar 21, 2003 9:46 pm
scottoiler
I would like opinions on the Scottoiler as to how it works, ease of
install, and the value of the product on the KLR.
Thanks,
-
- Posts: 2322
- Joined: Thu May 10, 2001 9:41 am
scottoiler
Great for street use. Installed no problem, besides the instructions I
found a web site where someone documented installing it on a KLR. I
don't know where you'd put the big touring reservoir, so I just got the
regular one.
I took it off because the drip tube would come out when I backed up the
bike in heavy brush. Also, after a good mud or sand ride, I would turn
up the flow to clean the chain but it wouldn't clean the front sprocket.
I went through three front sprockets in 13,500mi, but the stock chain
and rear sprocket still had a couple thousand miles left.
In 13,500mi my entire chain maintainance consisted of occasionally
spraying the chain with a lot of WD40 and wiping it with a rag. Keep out
of the sand and mud and you'll likely get a LOT of mileage out of a
chain using the oiler.
Devon
A15
westnash1 wrote:
>I would like opinions on the Scottoiler as to how it works, ease of >install, and the value of the product on the KLR. > >Thanks, > > > >
Who is online
Users browsing this forum: No registered users and 27 guests