DSN_KLR650
-
revmaaatin
- Posts: 1727
- Joined: Wed Nov 26, 2003 3:07 pm
Post
by revmaaatin » Wed Apr 19, 2006 2:24 pm
The 91 octane faux-pa: Sounds like it could be an editorial
problem, of cutting and pasting from one article into another,
leaving behind some skewed facts.
revmaaatin.
--- In
DSN_KLR650@yahoogroups.com, "st1100john"
wrote:
>
> It was from an article in Motorcycle Consumer News about the KLR.
> This months issue. Like I said I've always used 87 and never a
> problem, so just had to wonder where they got their information.
>
> John
>
> --- In
DSN_KLR650@yahoogroups.com, "revmaaatin" wrote:
> >
> > Hi John,
> > Would you care to share with us this 'source' that suggest 91
> octane
> > is required? Was it KHI or fu-bar the web-slinger? I don't
believe
> 91
> > octane is what the manual suggests (my manual is 117 miles from
> > here....)
> >
> > revmaaatin.
> >
> > --- In
DSN_KLR650@yahoogroups.com, "st1100john"
wrote:
> > >
> > > Was reading some material today (I know dangerous) and came
> across
> > the
> > > octane recommendation for the KLR. It stated 91 octane. I
have
> > always
> > > used 87. Never pinged or seemed down on power and I get about
40
> > mpg
> > > at highway speeds. What octane do most of y'all use??
> > >
> > > Take care,
> > >
> > > John
> > >
> >
>
-
traderpro2003
- Posts: 163
- Joined: Mon Nov 21, 2005 7:39 pm
Post
by traderpro2003 » Wed Apr 19, 2006 5:41 pm
I posted from my 2005 manual the excerpt that recommends 91 octane
(RON method) in the Miscellaneous Information album. It makes sense
considering the compression ratio. It's in the field, results will
vary.
I think some people are confusing octane levels/ratings with
additives. These are not the same. No doubt gasolines need to be
reformulated when mixed with additives like MTBE, but 91 octane is
still 91 octane. I'm ready with the chemistry books whenever
someone else is... Cheers - Brian
--- In
DSN_KLR650@yahoogroups.com, "revmaaatin" wrote:
>
> The 91 octane faux-pa: Sounds like it could be an editorial
> problem, of cutting and pasting from one article into another,
> leaving behind some skewed facts.
>
> revmaaatin.
>
> --- In
DSN_KLR650@yahoogroups.com, "st1100john"
> wrote:
> >
> > It was from an article in Motorcycle Consumer News about the
KLR.
> > This months issue. Like I said I've always used 87 and never a
> > problem, so just had to wonder where they got their information.
> >
> > John
> >
> > --- In
DSN_KLR650@yahoogroups.com, "revmaaatin" wrote:
> > >
> > > Hi John,
> > > Would you care to share with us this 'source' that suggest 91
> > octane
> > > is required? Was it KHI or fu-bar the web-slinger? I don't
> believe
> > 91
> > > octane is what the manual suggests (my manual is 117 miles
from
> > > here....)
> > >
> > > revmaaatin.
> > >
> > > --- In
DSN_KLR650@yahoogroups.com, "st1100john"
> wrote:
> > > >
> > > > Was reading some material today (I know dangerous) and came
> > across
> > > the
> > > > octane recommendation for the KLR. It stated 91 octane. I
> have
> > > always
> > > > used 87. Never pinged or seemed down on power and I get
about
> 40
> > > mpg
> > > > at highway speeds. What octane do most of y'all use??
> > > >
> > > > Take care,
> > > >
> > > > John
> > > >
> > >
> >
>
-
jokerloco9@aol.com
- Posts: 327
- Joined: Sun Jul 24, 2005 1:24 pm
Post
by jokerloco9@aol.com » Wed Apr 19, 2006 5:57 pm
You can't make such a broad generalization about the compression ratio
requiring the higher octane. There are many other factors, such as cam timing,
cooling of engine (air or water, and how efficient), even size of bore of
engine. Larger bore generally requires higher octane. Small bores less likely to
detonate. My GSXR1000 has 12:1 compression, runs fine on 91 octane.
It is the peak pressure that causes detonation.
Jefff A20
[Non-text portions of this message have been removed]
-
dooden
- Posts: 3355
- Joined: Sat Dec 15, 2001 3:37 pm
Post
by dooden » Wed Apr 19, 2006 6:24 pm
Umm we talking Apples and Oranges ?
I think there are 2 methods of getting that little number on the pump,
1st is the "RON" method which typically has a higher number than the
2nd method which I forgot it name now.
But hint the 2nd method is what most people see on the pump.
Dooden
A15 Green Ape
--- In
DSN_KLR650@yahoogroups.com, "traderpro2003"
wrote:
>
> I posted from my 2005 manual the excerpt that recommends 91 octane
> (RON method) in the Miscellaneous Information album. It makes sense
> considering the compression ratio. It's in the field, results will
> vary.
>
> I think some people are confusing octane levels/ratings with
> additives. These are not the same. No doubt gasolines need to be
> reformulated when mixed with additives like MTBE, but 91 octane is
> still 91 octane. I'm ready with the chemistry books whenever
> someone else is... Cheers - Brian
>
>
> --- In
DSN_KLR650@yahoogroups.com, "revmaaatin" wrote:
> >
> > The 91 octane faux-pa: Sounds like it could be an editorial
> > problem, of cutting and pasting from one article into another,
> > leaving behind some skewed facts.
> >
> > revmaaatin.
> >
> > --- In
DSN_KLR650@yahoogroups.com, "st1100john"
> > wrote:
> > >
> > > It was from an article in Motorcycle Consumer News about the
> KLR.
> > > This months issue. Like I said I've always used 87 and never a
> > > problem, so just had to wonder where they got their information.
> > >
> > > John
> > >
> > > --- In
DSN_KLR650@yahoogroups.com, "revmaaatin" wrote:
> > > >
> > > > Hi John,
> > > > Would you care to share with us this 'source' that suggest 91
> > > octane
> > > > is required? Was it KHI or fu-bar the web-slinger? I don't
> > believe
> > > 91
> > > > octane is what the manual suggests (my manual is 117 miles
> from
> > > > here....)
> > > >
> > > > revmaaatin.
> > > >
> > > > --- In
DSN_KLR650@yahoogroups.com, "st1100john"
> > wrote:
> > > > >
> > > > > Was reading some material today (I know dangerous) and came
> > > across
> > > > the
> > > > > octane recommendation for the KLR. It stated 91 octane. I
> > have
> > > > always
> > > > > used 87. Never pinged or seemed down on power and I get
> about
> > 40
> > > > mpg
> > > > > at highway speeds. What octane do most of y'all use??
> > > > >
> > > > > Take care,
> > > > >
> > > > > John
> > > > >
> > > >
> > >
> >
>
-
revmaaatin
- Posts: 1727
- Joined: Wed Nov 26, 2003 3:07 pm
Post
by revmaaatin » Wed Apr 19, 2006 9:36 pm
Hi Dooden,
Apple and Oranges? Not me man, I got an IBM. I didn't know Oranges
made computers....
Oh, you really mean apples and oranges...I get it, its a metaphor.
revmaaatin. who would apologize for being blonde, but now it is all
gray, well, what there is is gray.
--- In
DSN_KLR650@yahoogroups.com, "Dooden" wrote:
>
> Umm we talking Apples and Oranges ?
>
> I think there are 2 methods of getting that little number on the
pump,
> 1st is the "RON" method which typically has a higher number than
the
> 2nd method which I forgot it name now.
>
> But hint the 2nd method is what most people see on the pump.
>
> Dooden
> A15 Green Ape
>
> --- In
DSN_KLR650@yahoogroups.com, "traderpro2003"
> wrote:
> >
> > I posted from my 2005 manual the excerpt that recommends 91
octane
> > (RON method) in the Miscellaneous Information album. It makes
sense
> > considering the compression ratio. It's in the field, results
will
> > vary.
> >
> > I think some people are confusing octane levels/ratings with
> > additives. These are not the same. No doubt gasolines need to
be
> > reformulated when mixed with additives like MTBE, but 91 octane
is
> > still 91 octane. I'm ready with the chemistry books whenever
> > someone else is... Cheers - Brian
> >
> >
> > --- In
DSN_KLR650@yahoogroups.com, "revmaaatin" wrote:
> > >
> > > The 91 octane faux-pa: Sounds like it could be an editorial
> > > problem, of cutting and pasting from one article into another,
> > > leaving behind some skewed facts.
> > >
> > > revmaaatin.
> > >
> > > --- In
DSN_KLR650@yahoogroups.com, "st1100john"
> > > wrote:
> > > >
> > > > It was from an article in Motorcycle Consumer News about the
> > KLR.
> > > > This months issue. Like I said I've always used 87 and never
a
> > > > problem, so just had to wonder where they got their
information.
> > > >
> > > > John
> > > >
> > > > --- In
DSN_KLR650@yahoogroups.com, "revmaaatin"
wrote:
> > > > >
> > > > > Hi John,
> > > > > Would you care to share with us this 'source' that suggest
91
> > > > octane
> > > > > is required? Was it KHI or fu-bar the web-slinger? I
don't
> > > believe
> > > > 91
> > > > > octane is what the manual suggests (my manual is 117 miles
> > from
> > > > > here....)
> > > > >
> > > > > revmaaatin.
> > > > >
> > > > > --- In
DSN_KLR650@yahoogroups.com, "st1100john"
> > > wrote:
> > > > > >
> > > > > > Was reading some material today (I know dangerous) and
came
> > > > across
> > > > > the
> > > > > > octane recommendation for the KLR. It stated 91 octane.
I
> > > have
> > > > > always
> > > > > > used 87. Never pinged or seemed down on power and I get
> > about
> > > 40
> > > > > mpg
> > > > > > at highway speeds. What octane do most of y'all use??
> > > > > >
> > > > > > Take care,
> > > > > >
> > > > > > John
> > > > > >
> > > > >
> > > >
> > >
> >
>
-
Jud Jones
- Posts: 1251
- Joined: Wed Mar 03, 2004 2:52 pm
Post
by Jud Jones » Thu Apr 20, 2006 5:45 am
--- In
DSN_KLR650@yahoogroups.com, "Dooden" wrote:
>
> Umm we talking Apples and Oranges ?
>
> I think there are 2 methods of getting that little number on the pump,
> 1st is the "RON" method which typically has a higher number than the
> 2nd method which I forgot it name now.
>
> But hint the 2nd method is what most people see on the pump.
>
There's "research" octane and "motor" octane. The number on the pump is RON+MON/2. The
RON number is typically higher.
-
dooden
- Posts: 3355
- Joined: Sat Dec 15, 2001 3:37 pm
Post
by dooden » Thu Apr 20, 2006 6:48 am
--- In
DSN_KLR650@yahoogroups.com, "Jud Jones" wrote:
>
> --- In
DSN_KLR650@yahoogroups.com, "Dooden" wrote:
> >
> > Umm we talking Apples and Oranges ?
> >
> > I think there are 2 methods of getting that little number on the pump,
> > 1st is the "RON" method which typically has a higher number than the
> > 2nd method which I forgot it name now.
> >
> > But hint the 2nd method is what most people see on the pump.
> >
>
> There's "research" octane and "motor" octane. The number on the pump
is RON+MON/2. The
> RON number is typically higher.
See I are not so dumb afterall..

Reckon I owe you a beer this time Jud, not expecting to make it to
Enduraid this year, my Grandson has been coming for the summer months
and just cant take off on the bike and leave him behind, not when he
is wanting to go to camp and ride the 4 wheeler and stuff.
Dooden
A15 Green Ape
-
traderpro2003
- Posts: 163
- Joined: Mon Nov 21, 2005 7:39 pm
Post
by traderpro2003 » Fri Apr 21, 2006 12:23 am
Call Fred at Arrowhead MS 435-259-7356 and ask him about his digital
one...
Water Temperature Guage 20-4510 Digital readout $97.95 Compact in
size & reads up to 212' F. or 99.9 C.
--- In
DSN_KLR650@yahoogroups.com, "Jeff Layton" wrote:
>
> So after months of messing with the overtemp on my 2001 KLR650 and
chasing
> an out of spec gauge, I swapped a known good (and in-spec) gage
from Marko's
> 2006, and poof! No more overtemp! I couldn't get it to climb past
mid way,
> even after a long idle on a hot day.
>
> Now, I've ordered TWO different gauges - one from Ron Ayers, and
one from
> the local dealer - BOTH came in out of spec. The last one (from
the dealer),
> I had to hold their hand & show them the spec in the manual & how
to check
> it (after they already had their service department "check it" and
declared
> it good)
>
> So, good news & bad news: The bike is OK, but HOW do I go about
getting a
> good temp gauge that's actually in spec??? The dealer is re-
ordering - and
> I'll have them re-order until I get a good one OR I deplete the
country's
> supply & demand a refund.
>
> I've already tried to cheat & add a resistor in series to get the
> measurements into spec, but DOH! It's the correct winding
resistance that
> produces the magnetic field to move the needle, not the resistance
of a
> dummy resistor added in series - besides, it doesn't draw any
noticeable
> current, so it didn't do a dang thing.
>
> SO - now it's off to hunt down good gauges!
>
> Jeff Layton
>
Users browsing this forum: No registered users and 27 guests