electrical problem: lost headlight: nevermind

[John Thompson]

All, I have researched (via the FAQs) the topic of swapping out the rear spring only. From what I can find, there are 2 popular choices: Eshocks hypercoil / 9" x 2.25" / 450lb spring weight (taken from the FAQs) Progressive / 9" x 2.5" / 500-560lb spring weight / part # 1159-20GT (taken from the FAQs) Progressive confirmed that this same spring is what comes standard on the 420 series shock set-up. But claims the I.D. is 2.35" (FAQs says 2.5") & may not fit the OEM shock. This same spring definately appears to be the same spring DualStar sells, but they don't recommend it (go figure)... 1. What I want to know is will the Progressive 1159-20GT spring fit & work correctly in either inner diameter (I know it's only 1 diameter, but there seems to be some confusion somewhere)? 2. What other info should I know when swapping out the OEM spring for the Progressive (speacers, etc...) assuming it will work? I am 215 & always carry about 25lbs of gear... The late great Jake mentioned he swapped out his spring for a "granite", but I coudn't get any more info prior to his unfortunate passing... Thanks as always! John @ CO

[Fred Hink]

Progressive Suspension also makes another spring rated at 350/450 that may work better for you unless you are going to haul more luggage and/or a passenger. The 500/560 spring is very stiff and works well on bikes that are fully loaded. The slightly larger ID hasn't been a problem with all of the shocks I have sold springs for. You could make a spacer if you like but once the preload is applied to the spring it isn't going to be moving any place soon. Fred www.arrowheadmotorsports.com

----- Original Message ----- From: "John Thompson" To: DSN_KLR650@yahoogroups.com> Sent: Tuesday, July 26, 2005 2:23 PM Subject: [DSN_KLR650] Swapping out the rear spring > All, > > I have researched (via the FAQs) the topic of swapping out the rear spring > only. From what I can find, there are 2 popular choices: > > Eshocks hypercoil / 9" x 2.25" / 450lb spring weight (taken from the FAQs) > Progressive / 9" x 2.5" / 500-560lb spring weight / part # 1159-20GT > (taken > from the FAQs) > > Progressive confirmed that this same spring is what comes standard on the > 420 series shock set-up. But claims the I.D. is 2.35" (FAQs says 2.5") & > may not fit the OEM shock. This same spring definately appears to be the > same spring DualStar sells, but they don't recommend it (go figure)... > > 1. What I want to know is will the Progressive 1159-20GT spring fit & work > correctly in either inner diameter (I know it's only 1 diameter, but there > seems to be some confusion somewhere)? > > 2. What other info should I know when swapping out the OEM spring for the > Progressive (speacers, etc...) assuming it will work? > > I am 215 & always carry about 25lbs of gear... > The late great Jake mentioned he swapped out his spring for a "granite", > but > I coudn't get any more info prior to his unfortunate passing... > > Thanks as always! > > John @ CO

[John Thompson]

Great info & yes, I do plan on some touring with soft luggage... So making a spacer is really not needed then, huh? John

>From: "Fred Hink" >To: DSN_KLR650@yahoogroups.com>,"John Thompson" > >Subject: Re: [DSN_KLR650] Swapping out the rear spring >Date: Tue, 26 Jul 2005 14:58:54 -0600 > >Progressive Suspension also makes another spring rated at 350/450 that may >work better for you unless you are going to haul more luggage and/or a >passenger. The 500/560 spring is very stiff and works well on bikes that >are fully loaded. The slightly larger ID hasn't been a problem with all of >the shocks I have sold springs for. You could make a spacer if you like >but >once the preload is applied to the spring it isn't going to be moving any >place soon. > >Fred >www.arrowheadmotorsports.com > > > >----- Original Message ----- >From: "John Thompson" >To: DSN_KLR650@yahoogroups.com> >Sent: Tuesday, July 26, 2005 2:23 PM >Subject: [DSN_KLR650] Swapping out the rear spring > > > > All, > > > > I have researched (via the FAQs) the topic of swapping out the rear >spring > > only. From what I can find, there are 2 popular choices: > > > > Eshocks hypercoil / 9" x 2.25" / 450lb spring weight (taken from the >FAQs) > > Progressive / 9" x 2.5" / 500-560lb spring weight / part # 1159-20GT > > (taken > > from the FAQs) > > > > Progressive confirmed that this same spring is what comes standard on >the > > 420 series shock set-up. But claims the I.D. is 2.35" (FAQs says 2.5") >& > > may not fit the OEM shock. This same spring definately appears to be >the > > same spring DualStar sells, but they don't recommend it (go figure)... > > > > 1. What I want to know is will the Progressive 1159-20GT spring fit & >work > > correctly in either inner diameter (I know it's only 1 diameter, but >there > > seems to be some confusion somewhere)? > > > > 2. What other info should I know when swapping out the OEM spring for >the > > Progressive (speacers, etc...) assuming it will work? > > > > I am 215 & always carry about 25lbs of gear... > > The late great Jake mentioned he swapped out his spring for a "granite", > > but > > I coudn't get any more info prior to his unfortunate passing... > > > > Thanks as always! > > > > John @ CO > > > > >Archive Quicksearch at: >http://www.angelfire.com/ut/moab/klr650_data_search.html >List sponsored by Dual Sport News at: www.dualsportnews.com >List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > > >Yahoo! Groups Links > > > > > >

[Jud Jones]

A number of sources have informed me over the years that the progressive 500-560 ("granite") spring will not work on the stock shock. I say hooey. Mine works fine. --- In DSN_KLR650@yahoogroups.com, "John Thompson" wrote:

> All, > > I have researched (via the FAQs) the topic of swapping out the rear spring > only. From what I can find, there are 2 popular choices: > > Eshocks hypercoil / 9" x 2.25" / 450lb spring weight (taken from the FAQs) > Progressive / 9" x 2.5" / 500-560lb spring weight / part # 1159-20GT (taken > from the FAQs) > > Progressive confirmed that this same spring is what comes standard on the > 420 series shock set-up. But claims the I.D. is 2.35" (FAQs says 2.5") & > may not fit the OEM shock. This same spring definately appears to be the > same spring DualStar sells, but they don't recommend it (go figure)... > > 1. What I want to know is will the Progressive 1159-20GT spring fit & work > correctly in either inner diameter (I know it's only 1 diameter, but there > seems to be some confusion somewhere)? > > 2. What other info should I know when swapping out the OEM spring for the > Progressive (speacers, etc...) assuming it will work? > > I am 215 & always carry about 25lbs of gear... > The late great Jake mentioned he swapped out his spring for a "granite", but > I coudn't get any more info prior to his unfortunate passing... > > Thanks as always! > > John @ CO

[John Thompson]

I agree & it'll be worked on this week... Thanks for the help! John

>From: "Jud Jones" >To: DSN_KLR650@yahoogroups.com >Subject: [DSN_KLR650] Re: Swapping out the rear spring >Date: Tue, 26 Jul 2005 21:57:33 -0000 > >A number of sources have informed me over the years that the progressive >500-560 >("granite") spring will not work on the stock shock. I say hooey. Mine >works fine. > >--- In DSN_KLR650@yahoogroups.com, "John Thompson" >wrote: > > All, > > > > I have researched (via the FAQs) the topic of swapping out the rear >spring > > only. From what I can find, there are 2 popular choices: > > > > Eshocks hypercoil / 9" x 2.25" / 450lb spring weight (taken from the >FAQs) > > Progressive / 9" x 2.5" / 500-560lb spring weight / part # 1159-20GT >(taken > > from the FAQs) > > > > Progressive confirmed that this same spring is what comes standard on >the > > 420 series shock set-up. But claims the I.D. is 2.35" (FAQs says 2.5") >& > > may not fit the OEM shock. This same spring definately appears to be >the > > same spring DualStar sells, but they don't recommend it (go figure)... > > > > 1. What I want to know is will the Progressive 1159-20GT spring fit & >work > > correctly in either inner diameter (I know it's only 1 diameter, but >there > > seems to be some confusion somewhere)? > > > > 2. What other info should I know when swapping out the OEM spring for >the > > Progressive (speacers, etc...) assuming it will work? > > > > I am 215 & always carry about 25lbs of gear... > > The late great Jake mentioned he swapped out his spring for a "granite", >but > > I coudn't get any more info prior to his unfortunate passing... > > > > Thanks as always! > > > > John @ CO > > > > >Archive Quicksearch at: >http://www.angelfire.com/ut/moab/klr650_data_search.html >List sponsored by Dual Sport News at: www.dualsportnews.com >List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > > >Yahoo! Groups Links > > > > > > >

[Maurice P. Cruz]

John, I realize I'm not answering your original questions directly here, but you may want to consider as an alternative the new spring that Elden Carl and his crew have created for the KLR650: http://www.multisurfacemotorcycling.com/products.htm If you haven't come across MSM, it's a great site run by a great bunch of dual sport riders. Regards, Maurice A18, Melbourne

> 1. What I want to know is will the Progressive 1159-20GT spring

fit & work

> correctly in either inner diameter (I know it's only 1 diameter,

but there

> seems to be some confusion somewhere)? > > 2. What other info should I know when swapping out the OEM spring

for the

> Progressive (speacers, etc...) assuming it will work? > > I am 215 & always carry about 25lbs of gear... > The late great Jake mentioned he swapped out his spring for

a "granite", but

> I coudn't get any more info prior to his unfortunate passing... > > Thanks as always! > > John @ CO

[Doug Pippin]

John You may also want to check on a spring being made specifically for the KLR by Eldon Carl at http://www.multisurfacemotorcycling.com/products.htm It is specifically designed to replace the weak stock spring. Doug in NC At 05:58 PM 7/26/2005, you wrote:

> Date: Tue, 26 Jul 2005 14:23:22 -0600 > From: "John Thompson" >Subject: Swapping out the rear spring > >All, > >I have researched (via the FAQs) the topic of swapping out the rear spring >only. From what I can find, there are 2 popular choices: > >Eshocks hypercoil / 9" x 2.25" / 450lb spring weight (taken from the FAQs) >Progressive / 9" x 2.5" / 500-560lb spring weight / part # 1159-20GT >(taken from the FAQs) > >Progressive confirmed that this same spring is what comes standard on the >420 series shock set-up. But claims the I.D. is 2.35" (FAQs says 2.5") & >may not fit the OEM shock. This same spring definately appears to be the >same spring DualStar sells, but they don't recommend it (go figure)... > >1. What I want to know is will the Progressive 1159-20GT spring fit & work >correctly in either inner diameter (I know it's only 1 diameter, but there >seems to be some confusion somewhere)? > >2. What other info should I know when swapping out the OEM spring for the >Progressive (speacers, etc...) assuming it will work? > >I am 215 & always carry about 25lbs of gear... The late great Jake >mentioned he swapped out his spring for a "granite", but I coudn't get any >more info prior to his unfortunate passing... > >Thanks as always! > >John @ CO

---------- Doug Pippin 828-684-8488 dpippin5@... ---------- [Non-text portions of this message have been removed]

[Chris]

Just compare the price with eshocks, because it's the same stuff, no magic here, just springs. I put the 500-560 spring on my bike before I did research into rising links and how they work. Had I not already bought that spring, I'd have just gone with a 500lb straight rate. I'm 260lbs and a combination of LR fork springs with 2.75" spacers and the 500-560 LR spring in the rear I got my sag dialed in nicely. Oh yeah, be very careful with spring compressors if you've never played with springs before. They are NO joke and you can hurt yourself badly if you aren't working carefully.

On 7/27/05, Maurice P. Cruz wrote: > John, > > I realize I'm not answering your original questions directly here, > but you may want to consider as an alternative the new spring that > Elden Carl and his crew have created for the KLR650: > > http://www.multisurfacemotorcycling.com/products.htm > > If you haven't come across MSM, it's a great site run by a great > bunch of dual sport riders. > > Regards, > > Maurice > A18, Melbourne > > > > 1. What I want to know is will the Progressive 1159-20GT spring > fit & work > > correctly in either inner diameter (I know it's only 1 diameter, > but there > > seems to be some confusion somewhere)? > > > > 2. What other info should I know when swapping out the OEM spring > for the > > Progressive (speacers, etc...) assuming it will work? > > > > I am 215 & always carry about 25lbs of gear... > > The late great Jake mentioned he swapped out his spring for > a "granite", but > > I coudn't get any more info prior to his unfortunate passing... > > > > Thanks as always! > > > > John @ CO > > > > > Archive Quicksearch at: http://www.angelfire.com/ut/moab/klr650_data_search.html > List sponsored by Dual Sport News at: www.dualsportnews.com > List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > > > Yahoo! Groups Links > > > > > > >

[Randy Shultz]

Well, that's embarassing. Forgot I had installed an accesory fuse kit. Looking at those instead of my running fuses. Duh. Blown fuse.

--- In DSN_KLR650@yahoogroups.com, "Randy Shultz" wrote: > I need some help from those who are electrically savvy. > > I lost my headlight and my high-beam indicator. Fuse is good and > headlight bulb is good. What is my most likely culprit? > > There are only four fuses in the KLR right? There are the three under > the seat plus the fan fuse, correct? > > With the key on, I should be able to get 12 volts at the headlight > connector, shouldn't I? I'm dead there, yet I get 12v on both sides of > the 10A fuse. > > Any help would be appreciated. > > Randy