> -----Original Message----- > From: EdgyDrifter [mailto:bloodrose@...] > Sent: Monday, April 10, 2000 3:45 PM > To: Klr list > Subject: [DSN_klr650] Tire pressure > > > Hello > I was wondering what the S.O.P. was for filling your tires > back up after > dirt riding? Do those little CO2 cartridges supply enough > pressure or are > they just kind of an emergency thing? Has anyone tried to use a small > electric pump off the bike? If so what brand/model? Makes a world of > difference letting out some pressure when hitting the dirt, > but my favorite > spot is miles away from the nearest gas station so I have to > ride miles on > half flat tires...which bites...any ideas, thanks Mark. > > > -------------------------------------------------------------- > ---------- > @Backup- Protect and Access your data any time, any where on the net. > Try @Backup FREE and recieve 300 points from mypoints.com Install now: > http://click.egroups.com/1/2345/3/_/_/_/955406869/ > -------------------------------------------------------------- > ---------- > > Visit the KLR650 archives at > http://www.listquest.com/lq/search.html?ln=klr650 > Support Dual Sport News... dsneditor@... > Let's keep this list SPAM free! > > Visit our site at http://www.egroups.com/group/DSN_klr650 > To unsubscribe from this group, send an email to: > DSN_klr650-unsubscribe@egroups.com > >
(klr650) looking for a junction pipe for a super crapp
-
- Posts: 205
- Joined: Thu Apr 06, 2000 3:03 pm
[dsn_klr650] tire pressure
i haven't actually used it on the scooter yet, but i have confidence in my
blackburn mammoth mtn bicycle pump. it's only about 12-14" long, easily fits
in a camelbak or toolpak, and pumps up a mtn bike tire to 40 psi in under 2
minutes. i've been using it for years on mtb expeditions and races. i'd
guesstimate (from using my big floor pump on bikes and motorcyles), that to
go from say 15 up to 25 psi on a klr rear wheel would probably take 5 mins
or less. maybe if i'm bored tonight i'll try it.
it doesn't have a gauge, so you have to either guess well, or use a real
one.
-mark weaver
-
- Posts: 135
- Joined: Fri Apr 07, 2000 3:52 pm
[dsn_klr650] tire pressure
At 03:45 PM 4/10/00 -0700, EdgyDrifter wrote:
I found the CO2 cartridges to have no useful capacity. I carry a little bike pump - roughly 11 strokes per lb. for the rear, 8-9 strokes for the front. Stuart> I was wondering what the S.O.P. was for filling your tires back up after >dirt riding? Do those little CO2 cartridges supply enough pressure or are >they just kind of an emergency thing?
-
- Posts: 36
- Joined: Sun Apr 09, 2000 8:07 pm
[dsn_klr650] tire pressure
hmmm...
Him: 8"
You: 4"
You: 30" inseam
answer to question: GENETICS
Dust
A14
Smart mouth but lousy rider
Man with Big Grin
--- In DSN_klr650@egroups.com, Bogdan Swider wrote: > > > > I found the CO2 cartridges to have no useful capacity. I carry a little > > bike pump - roughly 11 strokes per lb. for the rear, 8-9 strokes for the > > front. > > > > Stuart > > > Hey, How come you get more air per stroke than I do? I'm seeing some > connection to the proverbial 8" stroke with a 4".................Bogdan
-
- Posts: 135
- Joined: Fri Apr 07, 2000 3:52 pm
[dsn_klr650] tire pressure
At 07:52 PM 4/10/00 -0600, you wrote:
I don't ask questions. I just pump. Fireball>Hey, How come you get more air per stroke than I do? I'm seeing some >connection to the proverbial 8" stroke with a 4"...
-
- Posts: 27
- Joined: Mon Apr 10, 2000 1:43 pm
(klr650) looking for a junction pipe for a super crapp
Thanks so much Dash! I was beginning to wonder if my previous post went
into digital never-never land.
Kev
-----Original Message-----
From: Dash Weeks
Hi Kev,
I suggest calling SuperTrapp 216.265.8400.
I just ordered an S-pipe assembly and hardware kit for my IDS Silencer.
Didn't seem to be a problem item and perhaps they have lots of different
configurations. I don't know what your inlet diameter is but the header
diameter has to be the same. The hardware kit is #010-6600 and is
$17.91
He went too fast to write down the S-Pipe # but is $56.32. At least for
my
application.
Good deal for me. I picked up a brand new IDS system for a KLX650 for
$90.
The Silencers are universal. So I get a replacement S-Pipe and
hardware
for $65 and I still saved a bundle over retail on the KLR system. The
whole system costs me about the same as retail on the universal IDS
silencer alone. We'll see how my neighbors like the Race Series Core.
laterZ
Dash
Who is online
Users browsing this forum: No registered users and 27 guests