Re: Emailing: TC-TD Clutch Release Bearing-New Teflon Type---1, TC-

[Bob Grunau]

Jack, A friend used a roller throw-out bearing on his TD and it did not last well. I personally do not use them as I know others have had problems. There is nothing wrong with the original carbon thrust throw-out bearing if you use a clutch return spring so the carbon thrust is not in contact with the clutch when the clutch is engaged. Bob Grunau G'day Group: I reckon the pictures won't come through so I am sending the long eBay viewing address as well.( http:// cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?View&Itemcategory=34208&item=452441 2982&rd=1 ) Now why it did not change colour leaves me at a loss, as usually it turns a light blue? I would like to query the Group as to their opinions on the above subject, a replacement part suggested for the Borg & Beck # 46892 or HD 1069 Clutch Release ( Throw out ) Bearing. Replies can be made, as to not plug up the works, off the web, unless a sender feels his information is of Group worthiness and should be communicated to the general population. Cheers for now; respectfully: Jack Emdall, TC # 6768 / TD # 3191

[Donald Wilkinson]

Hey Jack/list: RE:

>G'day Group:

I would like to query the Group as to their opinions on the above subject, a replacement part suggested for the Borg & Beck # 46892 or HD 1069 Clutch Release ( Throw out ) Bearing. Cheers for now; respectfully: Jack Emdall, TC # 6768 / TD # 3191