XPAG casting year codes

Post Reply
CRAIG SILER
Posts: 12
Joined: Fri Jul 20, 2018 3:34 pm

XPAG casting year codes

Post by CRAIG SILER » Fri Jul 20, 2018 4:34 pm

Is there source out there that would list the casting numbers/letters for each year an XPAG block was cast between 1945 and 1953?  I believe that the year 1948 has a casting code of 19A8.  I do not know the other years' casting codes.  The code can be found cast into the engine block just to the right of the distributor mounting on the block.

Thx,

Craig Siler

TC 2208

TC 7715 EX-U


David Wardell
Posts: 8
Joined: Sat May 07, 2016 3:41 am

Re: XPAG casting year codes

Post by David Wardell » Fri Jul 27, 2018 1:28 pm

Hi Craig, apologies for delay in replying - been on holiday. The MGCC T Register has done a lot of work in deciphering the casting numbers and date numbers on XPAG and XPEG blocks and the results of their work can be found at http://www.mgcc.co.uk/t-register/registers/t-type-chassis-and-engine-identification#castingnumbers There are clickable links in both the casting numbers and casting dates sections which take you to more in-depth pdf articles. There s lots of pictures as well and a link to an album of casting marks. In the case of casting dates, although we are reasonably sure of the basis for them, there are still lots of blocks we have seen which contain extra characters, and we are still investigating these. Get back to me if you have trouble locating the articles. David

mgtc7794
Posts: 10
Joined: Mon Aug 30, 2004 1:50 am

Re: XPAG casting year codes

Post by mgtc7794 » Fri Jul 27, 2018 1:38 pm

Hi Craig,Curious to know if your TC's chassis plate has a hyphen between the EX and U.Cheers Bob BrennanS. Freeport, METC7794EXU
On Fri, Jul 20, 2018 at 7:34 PM CRAIG SILER craigsiler@comcast.net [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote: [u][/u] [u][/u] Is there source out there that would list the casting numbers/letters for each year an XPAG block was cast between 1945 and 1953? I believe that the year 1948 has a casting code of 19A8. I do not know the other years' casting codes. The code can be found cast into the engine block just to the right of the distributor mounting on the block. Thx,

Craig Siler

TC 2208

TC 7715 EX-U


Duncan
Posts: 95
Joined: Sat Jul 18, 2015 12:04 pm

Re: XPAG casting year codes

Post by Duncan » Fri Jul 27, 2018 8:57 pm

The date code is quite simple.  There is a letter with a single digit number to its right.  D = 1940's.  A block cast in '49 willbe D9.  There is also a number before it, and a number after the D9.   Duncan-TC9866/exu
On Friday, July 20, 2018, 4:34:33 PM PDT, CRAIG SILER craigsiler@comcast.net [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:
  Is there source out there that would list the casting numbers/letters for each year an XPAG block was cast between 1945 and 1953?  I believe that the year 1948 has a casting code of 19A8.  I do not know the other years' casting codes.  The code can be found cast into the engine block just to the right of the distributor mounting on the block.

Thx,

Craig Siler

TC 2208

TC 7715 EX-U


Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests