Re: XPAG Rods

[Peter Pleitner]

Hi Whitworth Heads,

A friend wants to re-size the big ends of his XPAG rods. Does anyone know
the ID specification for this? Had mine done long ago and couldn't find a
record.

Cheers, Peter

[Skip Kelsey]

Peter:

The proper rod size is:

48.67MM
1.9159 in.

Skip Kelsey.........................


At 10:05 AM 3/16/00 -0500, Peter Pleitner wrote:

>Hi Whitworth Heads,
>
>A friend wants to re-size the big ends of his XPAG rods. Does anyone know
>the ID specification for this? Had mine done long ago and couldn't find a
>record.
>
>Cheers, Peter
>
>
>------------------------------------------------------------------------
>
>eGroups.com home: http://www.egroups.com/group/mg-tabc
>http://www.egroups.com - Simplifying group communications
>
>
>
>
>
>

[Bob and Carolyn Grunau]

My old Vandervell book says:
Housing diameter 1.9157"/48.658 mm
1.9162"/48.671 mm.
If you want tolerances.
Bob

----------

> From: Skip Kelsey
> To: Peter Pleitner ; T-ABCs List

> Subject: [mg-tabc] Re: XPAG Rods
> Date: Thursday, March 16, 2000 11:06 AM
>
> Peter:
>
> The proper rod size is:
>
> 48.67MM
> 1.9159 in.
>
> Skip Kelsey.........................
>
>
> At 10:05 AM 3/16/00 -0500, Peter Pleitner wrote:
> >Hi Whitworth Heads,
> >
> >A friend wants to re-size the big ends of his XPAG rods. Does anyone

know

> >the ID specification for this? Had mine done long ago and couldn't find

a

> >record.
> >
> >Cheers, Peter
> >
> >
> >------------------------------------------------------------------------
> >
> >eGroups.com home: http://www.egroups.com/group/mg-tabc
> >http://www.egroups.com - Simplifying group communications
> >
> >
> >
> >
> >
> >
>
>
> ------------------------------------------------------------------------
>
> eGroups.com home: http://www.egroups.com/group/mg-tabc
> http://www.egroups.com - Simplifying group communications
>
>
>
>

[Peter Pleitner]

Hi Whitworth Heads,

I want to commend Skip Kelsey and Bob Grunau for their exemplary performance
and demonstration how our T-ABC list can perform with the delivery of
valuable information, not invectives, opinions, and convictions..

Within two hours they responded with obscure yet vital data on the
dimensions for re-sizing the big ends of XPAG connecting rods. The
machinist was flabbergasted!

Good work, Skip and Bob!

Cheers, Peter

[CFritz7001@aol.com]

AMEN, AN YEA, VERILY!!!!! THE PRAISE IS WELL-DESERVED!!!
Regards to all,
Carl Fritz

[Leclerc, Lawrence A.]

As I beleive others have said previously, what we need to do is insure the
lives of M. Grunau and kKelsey for several hundreds of thousands of $.(US,
of course).

-----Original Message-----
From: CFritz7001@aol.com
To: pleitner@dundee.net; mg-tabc@egroups.com
Sent: 3/16/00 8:31 PM
Subject: [mg-tabc] Re: XPAG Rods

AMEN, AN YEA, VERILY!!!!! THE PRAISE IS WELL-DESERVED!!!
Regards to all,
Carl Fritz

------------------------------------------------------------------------

eGroups.com home: http://www.egroups.com/group/mg-tabc
http://www.egroups.com - Simplifying group communications

[Skip Kelsey]

Peter:


Thankyou for the many kind words!!!!!!!!!!!

Skip..............................

At 07:19 PM 3/16/00 -0500, Peter Pleitner wrote:

>Hi Whitworth Heads,
>
>I want to commend Skip Kelsey and Bob Grunau for their exemplary performance
>and demonstration how our T-ABC list can perform with the delivery of
>valuable information, not invectives, opinions, and convictions..
>
>Within two hours they responded with obscure yet vital data on the
>dimensions for re-sizing the big ends of XPAG connecting rods. The
>machinist was flabbergasted!
>
>Good work, Skip and Bob!
>
>Cheers, Peter
>
>
>------------------------------------------------------------------------
>-- 20 megs of disk space in your group's Document Vault
>-- http://www.egroups.com/docvault/mg-tabc/?m=1
>
>
>
>