TC Fuel Line Thread Size

[jffailla]

I plan to install an in line fuel filter purchased from Moss. However, I
prefer to install the filter without using rubber hose fittings. Can anyone
confirm the size of the braided fuel line to connect the AN-6 thread on the
Billet filter ? Earl's fitting PN 916106ERL has a AN-6adapter with a female
thread and a 1/4" NPT fitting but I am not sure if this is the correct
thread size.


Also, when I had my TC in for repairs I had the shop install a new Lucas
fuel pump. It worked till I got to my drive. I am not sure if the shop may
have reversed the two electrical connections when they installed the new
pump. Any suggestions would be appreciated.
Sincerely,
John

TC 6956