Re: TA/TB tool trays

Terry Sanders · Post by **Terry Sanders** » Mon Aug 22, 2005 9:36 pm

Anyone got a supplier for these.......??
Tnx
Terry in Oakland

[Non-text portions of this message have been removed]

Nancy Seabrook · Post by **Nancy Seabrook** » Tue Aug 23, 2005 7:19 am

Terry & Group,
I can supply the proper plywood bottoms for the tool trays.

Craig Seabrook
Whitworth Shop
Novelty, OH 44072
440-338-5950

On Tuesday, August 23, 2005, at 12:36 AM, Terry Sanders wrote:

> Anyone got a supplier for these.......??
> Tnx
> Terry in Oakland
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> _____________________________________________________
> This message scanned for viruses by CoreComm
>

1939mgtb · Post by **1939mgtb** » Tue Aug 23, 2005 7:04 pm

And his fit!!
Best,
Ray
"Spes mea in Deo est"

----- Original Message -----
From: "Nancy Seabrook"
To: "Terry Sanders"
Cc: "Tabc List"
Sent: Tuesday, August 23, 2005 9:12 AM
Subject: Re: [mg-tabc] TA/TB tool trays

> Terry & Group,
> I can supply the proper plywood bottoms for the tool trays.
>
> Craig Seabrook
> Whitworth Shop
> Novelty, OH 44072
> 440-338-5950
>
>
> On Tuesday, August 23, 2005, at 12:36 AM, Terry Sanders wrote:
>
>> Anyone got a supplier for these.......??
>> Tnx
>> Terry in Oakland
>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> _____________________________________________________
>> This message scanned for viruses by CoreComm
>>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

Jeff Redman · Post by **Jeff Redman** » Wed Aug 24, 2005 1:04 am

G'day Terry,

I seem to recall a name... Carl Vogel...as supplier of the moulded tool
trays
Address is lost as it was 20 years ago when I last fiddled with TA 2828.
With all due respects to Nancy, the plywood bottoms (proper or
otherwise) are the least of concern... the moulded rubber trays are the
subject.
If he's watching, I'm sure the wisdom of Bill Hentzen will be invaluable
here.
Let's see what he says....

-----Original Message-----
From: mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com] On Behalf
Of Terry Sanders
Sent: Tuesday, 23 August 2005 2:37 PM
To: Tabc List
Subject: [mg-tabc] TA/TB tool trays

Anyone got a supplier for these.......??
Tnx
Terry in Oakland

[Non-text portions of this message have been removed]

Yahoo! Groups Links

Wilsons Sandbox