Mallory Dual Point Ignition

Post Reply
Leinen, Robert
Posts: 5
Joined: Tue Aug 03, 2004 10:50 am

Mallory Dual Point Ignition

Post by Leinen, Robert » Wed Jun 22, 2005 5:54 am

When I purchased my TC, it already had a Mallory dual point distributor installed. Unfortunately, there were no instruction/owners manuals on the Mallory system. Any suggestions on how or where I can pick up instructional material. Does anyone know if the point settings are the same with the Mallory as the original distributor on the TC? Thanks, Bob Leinen [Non-text portions of this message have been removed]

Gene Gillam
Posts: 215
Joined: Tue Feb 01, 2000 4:09 pm

Re: Mallory Dual Point Ignition

Post by Gene Gillam » Wed Jun 22, 2005 6:07 am

Bob asked:
>Any suggestions on how or where I can pick up instructional material.
Does anyone know if the point settings are the same with the Mallory as the original distributor on the TC?http://www.centuryperformance.com/point_settings.asp for your point settings. Best, Gene Gillam Saucier, MS

Skip Kelsey
Posts: 153
Joined: Thu Dec 30, 1999 2:57 am

Re: Mallory Dual Point Ignition

Post by Skip Kelsey » Wed Jun 22, 2005 5:37 pm

Bob: Depending on which Mallory you have, most are set at .022 on each set of points. I have been running an old period Mallory "long neck" dist for about twenty years. It works great. Only thing that has gone wrong is I have had a couple of condensers go bad. Cheers: Skip Kelsey............................................................. At 09:00 AM 6/22/2005 -0400, Leinen, Robert wrote:
>When I purchased my TC, it already had a Mallory dual point distributor >installed. Unfortunately, there were no instruction/owners manuals on >the Mallory system. > > > >Any suggestions on how or where I can pick up instructional material. >Does anyone know if the point settings are the same with the Mallory as >the original distributor on the TC? > > > >Thanks, > > > >Bob Leinen > > > > > >[Non-text portions of this message have been removed] > > > > >Yahoo! Groups Links > > > >

John Seim
Posts: 57
Joined: Sun Jan 09, 2000 2:12 pm

Re: Mallory Dual Point Ignition

Post by John Seim » Wed Jun 22, 2005 8:47 pm

Mallory has been bought out by the Mr. Gasket Company. You can go to the website www.mrgasket.com> and click on the Mallory button to get to the Mallory page, and possibly some tech help from them. John Seim Irvine, CA
> >At 09:00 AM 6/22/2005 -0400, Leinen, Robert wrote: > > >>When I purchased my TC, it already had a Mallory dual point distributor >>installed. Unfortunately, there were no instruction/owners manuals on >>the Mallory system. >> >> >> >>Any suggestions on how or where I can pick up instructional material. >>Does anyone know if the point settings are the same with the Mallory as >>the original distributor on the TC? >> >> >> >>Thanks, >> >> >> >>Bob Leinen >> >>

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests