Re: Pls help identify [1 Attachment]

Post Reply
Doug Pelton
Posts: 57
Joined: Sun Dec 21, 2003 12:27 pm

Re: Pls help identify [1 Attachment]

Post by Doug Pelton » Sat Jun 16, 2018 10:05 am

Bruce,

 

This is the back plate for the door latch.  It fits between the front door latch pillar and the body skin.  It has been modified from original with the tab.  You hold the tab while positioning to start the 2 machine screws through the door striker.

 

Once you finalize the door striker then you sink the other 2 wood screws in door striker.

 

The second piece is the retainer bracket.   It gets nailed to pillar to hold back plate from falling out when the machine screws are removed.  I do not use this as one the machine screws are set, no need.

 

I have all of thee pieces in stock if anyone else needs them.

 

Regards,

 

[b][i]Doug Pelton,[/i][/b] Proprietor

From The Frame Up

480-588-8185

For Fastest Service:  order@fromtheframeup.com

Like us on FACEBOOK!

See us on YouTUBE!

 

www.FromTheFrameUp.com

 

[b]From:[/b] mg-tabc@yahoogroups.com mg-tabc@yahoogroups.com> [b]On Behalf Of [/b]Bruce Doran Veevers bruce@mbssales.ca [mg-tabc] [b]Sent:[/b] Saturday, June 16, 2018 9:59 AM [b]To:[/b] MGTABC GROUP mg-tabc@yahoogroups.com> [b]Subject:[/b] [mg-tabc] Pls help identify [1 Attachment]

 

 

 

[img]https://ec.yimg.com/ec?url=https%3A%2F%2Fipmcdn.avast.com%2Fimages%2Ficons%2Ficon-envelope-tick-round-orange-animated-no-repeat-v1.gif&t=1529341467&sig=gm5ZNsudS.1xzU11uhzGdw--~D[/img] Virus-free. www.avast.com

Norman Verona
Posts: 107
Joined: Sun May 17, 2015 4:21 am

Re: Pls help identify [1 Attachment]

Post by Norman Verona » Sat Jun 16, 2018 10:20 am

I’m not all sure but could it be the handbrake cable guide.

 

 

[b][i]Norman Verona[/i][/b]

11 Cherry Close, Royston, South Yorkshire S71 4LZ

Phone: 0044 (0)1226 728811

Mob: 0044 (0)741 9905 741

[b][i]Web: www.frenchblat.com[/i][/b]

 

[b]From:[/b] mg-tabc@yahoogroups.com mg-tabc@yahoogroups.com> [b]On Behalf Of [/b]Bruce Doran Veevers bruce@mbssales.ca [mg-tabc] [b]Sent:[/b] 16 June 2018 17:59 [b]To:[/b] MGTABC GROUP mg-tabc@yahoogroups.com> [b]Subject:[/b] [mg-tabc] Pls help identify [1 Attachment]

 

 

 


Fred Kuntz
Posts: 7
Joined: Fri Aug 17, 2001 6:38 pm

Re: Pls help identify [1 Attachment]

Post by Fred Kuntz » Sat Jun 16, 2018 10:28 am

Bruce,         Those are a Whitworth Shop door strike nut plate and retainer. If you have any other questions about them, contact me off list.   Thanks Fred Kuntz The Whitworth Shop TC 5087   [b]From:[/b] mg-tabc-noreply@yahoogroups.com">Bruce Doran Veevers bruce@mbssales.ca [mg-tabc] [b]Sent:[/b] Saturday, June 16, 2018 12:58 PM [b]To:[/b] mg-tabc@yahoogroups.com">MGTABC GROUP [b]Subject:[/b] [mg-tabc] Pls help identify [1 Attachment]    

Sent from my iPhone


Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests