Re%3A [mg-tabc] TC Starter

Post Reply
Tudor Studios
Posts: 9
Joined: Fri Jul 21, 2017 7:05 am

Re%3A [mg-tabc] TC Starter

Post by Tudor Studios » Sun Dec 17, 2017 12:32 am

Hi Listers,
I had my local machine shop turn down the heads of the bolts so that I could get my ring spanner/socket
over them. Still looks right, but perhaps a bit OTT.
Happy Christmas to all.
Regards Mike Bate.
MGTC10200 - Chilly Cornwall, UK.
Top
Norman Verona
Posts: 107
Joined: Sun May 17, 2015 4:21 am

Re: Re%3A [mg-tabc] TC Starter

Post by Norman Verona » Sun Dec 17, 2017 1:33 am

I have a set of Melco Whitworth box spanners. The threads in the bell housing and setscrews have been cleaned and died and tapped. They will screw in by hand easily and then a box spanner tightens them. Takes a few seconds.

 

 

[b][i]Norman Verona[/i][/b]

11 Cherry Close, Royston, South Yorkshire S71 4LZ

Phone: 0044 (0)1226 728811

Mob: 0044 (0)741 9905 741

[b][i]Web: www.frenchblat.com[/i][/b]

 

[b]From:[/b] mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]'Tudor Studios' mailbox@tudorstudios.co.uk [mg-tabc] [b]Sent:[/b] 17 December 2017 08:32 [b]To:[/b] mg-tabc@yahoogroups.com [b]Subject:[/b] Re%3A [mg-tabc] TC Starter

 

 

Hi Listers,

I had my local machine shop turn down the heads of the bolts so that I could get my ring spanner/socket

over them. Still looks right, but perhaps a bit OTT.

Happy Christmas to all.

Regards Mike Bate.

MGTC10200 - Chilly Cornwall, UK.

Top
James Lee
Posts: 8
Joined: Tue Apr 07, 2015 10:54 am

Re: Re%3A [mg-tabc] TC Starter

Post by James Lee » Sun Dec 17, 2017 7:26 am

Mine are like yours Norman - a little cramp in there but not nearly as cramp as working on helicopters - lolMerry HoHo to you and yourTy Lee in snowy Montana USA Sent from my iPhone
On Dec 17, 2017, at 2:33 AM, 'Norman Verona' norman@frenchblat.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:
  I have a set of Melco Whitworth box spanners. The threads in the bell housing and setscrews have been cleaned and died and tapped. They will screw in by hand easily and then a box spanner tightens them. Takes a few seconds.

 

 

[b][i]Norman Verona[/i][/b]

11 Cherry Close, Royston, South Yorkshire S71 4LZ

Phone: 0044 (0)1226 728811

Mob: 0044 (0)741 9905 741

[b][i]Web: www.frenchblat.com[/i][/b]

 

[b]From:[/b] mg-tabc@yahoogroups.com [mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]'Tudor Studios' mailbox@tudorstudios.co.uk [mg-tabc] [b]Sent:[/b] 17 December 2017 08:32 [b]To:[/b] mg-tabc@yahoogroups.com [b]Subject:[/b] Re%3A [mg-tabc] TC Starter

 

 

Hi Listers,

I had my local machine shop turn down the heads of the bolts so that I could get my ring spanner/socket

over them. Still looks right, but perhaps a bit OTT.

Happy Christmas to all.

Regards Mike Bate.

MGTC10200 - Chilly Cornwall, UK.

Top
Norman Verona
Posts: 107
Joined: Sun May 17, 2015 4:21 am

Re: Re%3A [mg-tabc] TC Starter

Post by Norman Verona » Sun Dec 17, 2017 8:32 am

James,

 

I think the worse old car to work on was the MGA Twin Cam. Getting the starter off that was major surgery.

 

I have this theory about modern cars. There s a secret award made to car designers for who can make the worst design for a mechanic to work on. Whoever designed the Mini Cooper S with the supercharger won the 2005 award.

 

 

[b][i]Norman Verona[/i][/b]

11 Cherry Close, Royston, South Yorkshire S71 4LZ

Phone: 0044 (0)1226 728811

Mob: 0044 (0)741 9905 741

[b][i]Web: www.frenchblat.com[/i][/b]

 

[b]From:[/b] James Lee [mailto:rmrmaintenance@aol.com] [b]Sent:[/b] 17 December 2017 15:27 [b]To:[/b] Norman Verona norman@frenchblat.com> [b]Cc:[/b] Tudor Studios mailbox@tudorstudios.co.uk>; mg-tabc@yahoogroups.com [b]Subject:[/b] Re: Re%3A [mg-tabc] TC Starter

 

Mine are like yours Norman - a little cramp in there but not nearly as cramp as working on helicopters - lol

Merry HoHo to you and your

Ty Lee in snowy Montana USA

Sent from my iPhone

On Dec 17, 2017, at 2:33 AM, 'Norman Verona' norman@frenchblat.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:

 

I have a set of Melco Whitworth box spanners. The threads in the bell housing and setscrews have been cleaned and died and tapped. They will screw in by hand easily and then a box spanner tightens them. Takes a few seconds.

 

 

[b][i]Norman Verona[/i][/b]

11 Cherry Close, Royston, South Yorkshire S71 4LZ

Phone: 0044 (0)1226 728811

Mob: 0044 (0)741 9905 741

[b][i]Web: www.frenchblat.com[/i][/b]

 

[b]From:[/b] mg-tabc@yahoogroups.com [mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]'Tudor Studios' mailbox@tudorstudios.co.uk [mg-tabc] [b]Sent:[/b] 17 December 2017 08:32 [b]To:[/b] mg-tabc@yahoogroups.com [b]Subject:[/b] Re%3A [mg-tabc] TC Starter

 

 

Hi Listers,

I had my local machine shop turn down the heads of the bolts so that I could get my ring spanner/socket

over them. Still looks right, but perhaps a bit OTT.

Happy Christmas to all.

Regards Mike Bate.

MGTC10200 - Chilly Cornwall, UK.

Top
SANDY SANDERS
Posts: 45
Joined: Tue Dec 16, 2003 7:20 pm

Re: Re%3A [mg-tabc] TC Starter

Post by SANDY SANDERS » Sun Dec 17, 2017 9:35 am

#ygrps-yiv-65771718 .ygrps-yiv-65771718ygrp-photo-title { FONT-SIZE:smaller;OVERFLOW:hidden;HEIGHT:15px;WIDTH:75px;TEXT-ALIGN:center;CLEAR:both;} #ygrps-yiv-65771718 DIV.ygrps-yiv-65771718ygrp-photo { BORDER-TOP:black 1px solid;HEIGHT:62px;BORDER-RIGHT:black 1px solid;WIDTH:62px;BACKGROUND-REPEAT:no-repeat;BORDER-BOTTOM:black 1px solid;BACKGROUND-POSITION:center 50%;BORDER-LEFT:black 1px solid;BACKGROUND-COLOR:white;} #ygrps-yiv-65771718 DIV.ygrps-yiv-65771718photo-title A { TEXT-DECORATION:none;} #ygrps-yiv-65771718 DIV.ygrps-yiv-65771718photo-title A:active { TEXT-DECORATION:none;} #ygrps-yiv-65771718 DIV.ygrps-yiv-65771718photo-title A:hover { TEXT-DECORATION:none;} #ygrps-yiv-65771718 DIV.ygrps-yiv-65771718photo-title A:visited { TEXT-DECORATION:none;} #ygrps-yiv-65771718 DIV.ygrps-yiv-65771718attach-table DIV.ygrps-yiv-65771718attach-row { CLEAR:both;} #ygrps-yiv-65771718 DIV.ygrps-yiv-65771718attach-table DIV.ygrps-yiv-65771718attach-row DIV { FLOAT:left;} #ygrps-yiv-65771718 P { OVERFLOW:hidden;PADDING-BOTTOM:3px;PADDING-TOP:15px;PADDING-LEFT:0px;CLEAR:both;PADDING-RIGHT:0px;} #ygrps-yiv-65771718 DIV.ygrps-yiv-65771718ygrp-file { WIDTH:30px;} #ygrps-yiv-65771718 DIV.ygrps-yiv-65771718attach-table DIV.ygrps-yiv-65771718attach-row DIV DIV A { TEXT-DECORATION:none;} #ygrps-yiv-65771718 DIV.ygrps-yiv-65771718attach-table DIV.ygrps-yiv-65771718attach-row DIV DIV SPAN { FONT-WEIGHT:normal;} #ygrps-yiv-65771718 DIV.ygrps-yiv-65771718ygrp-file-title { FONT-WEIGHT:bold;} #ygrps-yiv-65771718 v\00003a* {} #ygrps-yiv-65771718 o\00003a* {} #ygrps-yiv-65771718 w\00003a* {} #ygrps-yiv-65771718 .ygrps-yiv-65771718shape {} Norman.        I saw a repeat of the program Wheeler Dealers involving a Lancia. To replace the alternator  Ed had to remove the front right suspension. A friend of mine had a toyota and had to loosen the front right fender to replace the battery. It prooves that there are jackasses in all designers. Sandy
----- Original Message ----- [b]From:[/b] mg-tabc-noreply@yahoogroups.com [b]To:[/b] rmrmaintenance@aol.com [b]Cc:[/b] mailbox@tudorstudios.co.uk ; mg-tabc@yahoogroups.com [b]Sent:[/b] Sunday, December 17, 2017 11:32 AM [b]Subject:[/b] RE: Re%3A [mg-tabc] TC Starter James,

 

I think the worse old car to work on was the MGA Twin Cam. Getting the starter off that was major surgery.

 

I have this theory about modern cars. There s a secret award made to car designers for who can make the worst design for a mechanic to work on. Whoever designed the Mini Cooper S with the supercharger won the 2005 award.

 

 

[b][i]Norman Verona[/i][/b]

11 Cherry Close, Royston, South Yorkshire S71 4LZ

Phone: 0044 (0)1226 728811

Mob: 0044 (0)741 9905 741

[b][i]Web: www.frenchblat.com[/i][/b]

 

[b]From:[/b] James Lee [mailto:rmrmaintenance@aol.com] [b]Sent:[/b] 17 December 2017 15:27 [b]To:[/b] Norman Verona norman@frenchblat.com> [b]Cc:[/b] Tudor Studios mailbox@tudorstudios.co.uk>; mg-tabc@yahoogroups.com [b]Subject:[/b] Re: Re%3A [mg-tabc] TC Starter

 

Mine are like yours Norman - a little cramp in there but not nearly as cramp as working on helicopters - lol

Merry HoHo to you and your

Ty Lee in snowy Montana USA

Sent from my iPhone

On Dec 17, 2017, at 2:33 AM, 'Norman Verona' norman@frenchblat.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:

 

I have a set of Melco Whitworth box spanners. The threads in the bell housing and setscrews have been cleaned and died and tapped. They will screw in by hand easily and then a box spanner tightens them. Takes a few seconds.

 

 

[b][i]Norman Verona[/i][/b]

11 Cherry Close, Royston, South Yorkshire S71 4LZ

Phone: 0044 (0)1226 728811

Mob: 0044 (0)741 9905 741

[b][i]Web: www.frenchblat.com[/i][/b]

 

[b]From:[/b] mg-tabc@yahoogroups.com [mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]'Tudor Studios' mailbox@tudorstudios.co.uk [mg-tabc] [b]Sent:[/b] 17 December 2017 08:32 [b]To:[/b] mg-tabc@yahoogroups.com [b]Subject:[/b] Re%3A [mg-tabc] TC Starter

 

 

Hi Listers,

I had my local machine shop turn down the heads of the bolts so that I could get my ring spanner/socket

over them. Still looks right, but perhaps a bit OTT.

Happy Christmas to all.

Regards Mike Bate.

MGTC10200 - Chilly Cornwall, UK.

Top
joecurto@aol.com
Posts: 313
Joined: Wed Jul 19, 2000 3:42 am

Re: Re%3A [mg-tabc] TC Starter

Post by joecurto@aol.com » Sun Dec 17, 2017 9:56 am

If you want something to give you greif try working on a push-rod MGA with a cross flow head , it makes distributor, starter and oil filter access almost impossible , and yes Norm the Twin cam was no joy Joe Curto 718-762-7878 www.joecurto.com -----Original Message----- From: SANDY SANDERS esane@msn.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> To: norman norman@frenchblat.com>; rmrmaintenance rmrmaintenance@aol.com> Cc: mailbox mailbox@tudorstudios.co.uk>; mg-tabc mg-tabc@yahoogroups.com> Sent: Sun, Dec 17, 2017 12:35 pm Subject: Re: Re%3A [mg-tabc] TC Starter   Norman.        I saw a repeat of the program Wheeler Dealers involving a Lancia. To replace the alternator  Ed had to remove the front right suspension. A friend of mine had a toyota and had to loosen the front right fender to replace the battery. It prooves that there are jackasses in all designers. Sandy
----- Original Message ----- [b]From:[/b] mg-tabc-noreply@yahoogroups.com [b]To:[/b] rmrmaintenance@aol.com [b]Cc:[/b] mailbox@tudorstudios.co.uk ; mg-tabc@yahoogroups.com [b]Sent:[/b] Sunday, December 17, 2017 11:32 AM [b]Subject:[/b] RE: Re%3A [mg-tabc] TC Starter James,   I think the worse old car to work on was the MGA Twin Cam. Getting the starter off that was major surgery.   I have this theory about modern cars. There s a secret award made to car designers for who can make the worst design for a mechanic to work on. Whoever designed the Mini Cooper S with the supercharger won the 2005 award.     [b][i]Norman Verona[/i][/b] 11 Cherry Close, Royston, South Yorkshire S71 4LZ Phone: 0044 (0)1226 728811 Mob: 0044 (0)741 9905 741 [b][i]Web: www.frenchblat.com[/i][/b]   [b]From:[/b] James Lee [rmrmaintenance@aol.com?] [b]Sent:[/b] 17 December 2017 15:27 [b]To:[/b] Norman Verona norman@frenchblat.com> [b]Cc:[/b] Tudor Studios mailbox@tudorstudios.co.uk>; mg-tabc@yahoogroups.com [b]Subject:[/b] Re: Re%3A [mg-tabc] TC Starter   Mine are like yours Norman - a little cramp in there but not nearly as cramp as working on helicopters - lol Merry HoHo to you and your Ty Lee in snowy Montana USA Sent from my iPhone On Dec 17, 2017, at 2:33 AM, 'Norman Verona' norman@frenchblat.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:   I have a set of Melco Whitworth box spanners. The threads in the bell housing and setscrews have been cleaned and died and tapped. They will screw in by hand easily and then a box spanner tightens them. Takes a few seconds.     [b][i]Norman Verona[/i][/b] 11 Cherry Close, Royston, South Yorkshire S71 4LZ Phone: 0044 (0)1226 728811 Mob: 0044 (0)741 9905 741 [b][i]Web: www.frenchblat.com[/i][/b]   [b]From:[/b] mg-tabc@yahoogroups.com [mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]'Tudor Studios' mailbox@tudorstudios.co.uk [mg-tabc] [b]Sent:[/b] 17 December 2017 08:32 [b]To:[/b] mg-tabc@yahoogroups.com [b]Subject:[/b] Re%3A [mg-tabc] TC Starter     Hi Listers, I had my local machine shop turn down the heads of the bolts so that I could get my ring spanner/socket over them. Still looks right, but perhaps a bit OTT. Happy Christmas to all. Regards Mike Bate. MGTC10200 - Chilly Cornwall, UK.
#ygrps-yiv-432719149 #ygrps-yiv-432719149AOLMsgPart_2_6b64fa39-0d84-4d13-8f4c-67d112099cdf td{color:black;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-mkp hr {border:1px solid #d8d8d8;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-mkp #ygrps-yiv-432719149aolmail_hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-mkp #ygrps-yiv-432719149aolmail_ads {margin-bottom:10px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-mkp .ygrps-yiv-432719149aolmail_ad {padding:0 0;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-mkp .ygrps-yiv-432719149aolmail_ad p {margin:0;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-mkp .ygrps-yiv-432719149aolmail_ad a {color:#0000ff;text-decoration:none;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-sponsor #ygrps-yiv-432719149aolmail_ygrp-lc {font-family:Arial;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-sponsor #ygrps-yiv-432719149aolmail_ygrp-lc #ygrps-yiv-432719149aolmail_hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-sponsor #ygrps-yiv-432719149aolmail_ygrp-lc .ygrps-yiv-432719149aolmail_ad {margin-bottom:10px;padding:0 0;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_actions {font-family:Verdana;font-size:11px;padding:10px 0;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_activity span {font-weight:700;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_activity span:first-child {text-transform:uppercase;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_activity span a {color:#5085b6;text-decoration:none;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_activity span span {color:#ff7900;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_activity span .ygrps-yiv-432719149aolmail_underline {text-decoration:underline;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody .ygrps-yiv-432719149aolmail_attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody .ygrps-yiv-432719149aolmail_attach div a {text-decoration:none;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody .ygrps-yiv-432719149aolmail_attach img {border:none;padding-right:5px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody .ygrps-yiv-432719149aolmail_attach label {display:block;margin-bottom:5px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody .ygrps-yiv-432719149aolmail_attach label a {text-decoration:none;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody blockquote {margin:0 0 0 4px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody .ygrps-yiv-432719149aolmail_bold {font-family:Arial;font-size:13px;font-weight:700;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody .ygrps-yiv-432719149aolmail_bold a {text-decoration:none;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody dd.ygrps-yiv-432719149aolmail_last p a {font-family:Verdana;font-weight:700;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody dd.ygrps-yiv-432719149aolmail_last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody dd.ygrps-yiv-432719149aolmail_last p span.ygrps-yiv-432719149aolmail_yshortcuts {margin-right:0;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody div.ygrps-yiv-432719149aolmail_attach-table div div a {text-decoration:none;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody div.ygrps-yiv-432719149aolmail_attach-table {width:400px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody div.ygrps-yiv-432719149aolmail_file-title a, #ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody div.ygrps-yiv-432719149aolmail_file-title a:active, #ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody div.ygrps-yiv-432719149aolmail_file-title a:hover, #ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody div.ygrps-yiv-432719149aolmail_file-title a:visited {text-decoration:none;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody div.ygrps-yiv-432719149aolmail_photo-title a, #ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody div.ygrps-yiv-432719149aolmail_photo-title a:active, #ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody div.ygrps-yiv-432719149aolmail_photo-title a:hover, #ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody div.ygrps-yiv-432719149aolmail_photo-title a:visited {text-decoration:none;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody div#ygrps-yiv-432719149aolmail_ygrp-mlmsg #ygrps-yiv-432719149aolmail_ygrp-msg p a span.ygrps-yiv-432719149aolmail_yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody .ygrps-yiv-432719149aolmail_green {color:#628c2a;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody .ygrps-yiv-432719149aolmail_MsoNormal {margin:0 0 0 0;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody o {font-size:0;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_photos div {float:left;width:72px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_photos div div {border:1px solid #666666;height:62px;overflow:hidden;width:62px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_reco-category {font-size:77%;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_reco-desc {font-size:77%;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody .ygrps-yiv-432719149aolmail_replbq {margin:4px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-mlmsg table {font-size:inherit;font:100%;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-mlmsg select, #ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody input, #ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody textarea {font:99% Arial, Helvetica, clean, sans-serif;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-mlmsg pre, #ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody code {font:115% monospace;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-mlmsg * {line-height:1.22em;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-mlmsg #ygrps-yiv-432719149aolmail_logo {padding-bottom:10px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-msg p a {font-family:Verdana;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-msg p#ygrps-yiv-432719149aolmail_attach-count span {color:#1E66AE;font-weight:700;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-reco #ygrps-yiv-432719149aolmail_reco-head {color:#ff7900;font-weight:700;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-reco {margin-bottom:20px;padding:0px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-sponsor #ygrps-yiv-432719149aolmail_ov li a {font-size:130%;text-decoration:none;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-sponsor #ygrps-yiv-432719149aolmail_ov li {font-size:77%;list-style-type:square;padding:6px 0;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-sponsor #ygrps-yiv-432719149aolmail_ov ul {margin:0;padding:0 0 0 8px;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-text {font-family:Georgia;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-text p {margin:0 0 1em 0;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-text tt {font-size:120%;}#ygrps-yiv-432719149 .ygrps-yiv-432719149aolReplacedBody #ygrps-yiv-432719149aolmail_ygrp-vital ul li:last-child {border-right:none !important;}
Top
Norman Verona
Posts: 107
Joined: Sun May 17, 2015 4:21 am

Re: Re%3A [mg-tabc] TC Starter

Post by Norman Verona » Sun Dec 17, 2017 10:21 am

Joe,

 

It would have been the same as a Twin Cam. I fitted a few Alexander ali cross flow heads to B s, Midgets and 1100/1300 in my time at UM.

 

The one car we never had a problem with was Mini s (and 1100/1300). A few of us set up a Mini Bay and became so good, partly by making extra tooling, that we were sharing the production times for bonus. When a good working wage in London was 20 pw, I was taking home 60 pw!

 

 

[b][i]Norman Verona[/i][/b]

11 Cherry Close, Royston, South Yorkshire S71 4LZ

Phone: 0044 (0)1226 728811

Mob: 0044 (0)741 9905 741

[b][i]Web: www.frenchblat.com[/i][/b]

 

[b]From:[/b] joecurto@aol.com [mailto:joecurto@aol.com] [b]Sent:[/b] 17 December 2017 17:56 [b]To:[/b] esane@msn.com; norman@frenchblat.com; rmrmaintenance@aol.com [b]Cc:[/b] mailbox@tudorstudios.co.uk; mg-tabc@yahoogroups.com [b]Subject:[/b] Re: Re%3A [mg-tabc] TC Starter

 

If you want something to give you greif try working on a push-rod MGA with a cross flow head , it makes distributor, starter and oil filter access almost impossible , and yes Norm the Twin cam was no joy

 

 

Joe Curto

718-762-7878

www.joecurto.com

 

 

-----Original Message----- From: SANDY SANDERS esane@msn.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> To: norman norman@frenchblat.com>; rmrmaintenance rmrmaintenance@aol.com> Cc: mailbox mailbox@tudorstudios.co.uk>; mg-tabc mg-tabc@yahoogroups.com> Sent: Sun, Dec 17, 2017 12:35 pm Subject: Re: Re%3A [mg-tabc] TC Starter

 

Norman.

       I saw a repeat of the program Wheeler Dealers involving a Lancia. To replace the alternator  Ed had to remove the front right suspension. A friend of mine had a toyota and had to loosen the front right fender to replace the battery.

It prooves that there are jackasses in all designers.

Sandy

----- Original Message -----

[b]From:[/b] mg-tabc-noreply@yahoogroups.com

[b]To:[/b] rmrmaintenance@aol.com

[b]Cc:[/b] mailbox@tudorstudios.co.uk ; mg-tabc@yahoogroups.com

[b]Sent:[/b] Sunday, December 17, 2017 11:32 AM

[b]Subject:[/b] RE: Re%3A [mg-tabc] TC Starter

 

James,

 

I think the worse old car to work on was the MGA Twin Cam. Getting the starter off that was major surgery.

 

I have this theory about modern cars. There s a secret award made to car designers for who can make the worst design for a mechanic to work on. Whoever designed the Mini Cooper S with the supercharger won the 2005 award.

 

 

[b][i]Norman Verona[/i][/b]

11 Cherry Close, Royston, South Yorkshire S71 4LZ

Phone: 0044 (0)1226 728811

Mob: 0044 (0)741 9905 741

[b][i]Web: www.frenchblat.com[/i][/b]

 

[b]From:[/b] James Lee [rmrmaintenance@aol.com?] [b]Sent:[/b] 17 December 2017 15:27 [b]To:[/b] Norman Verona norman@frenchblat.com> [b]Cc:[/b] Tudor Studios mailbox@tudorstudios.co.uk>; mg-tabc@yahoogroups.com [b]Subject:[/b] Re: Re%3A [mg-tabc] TC Starter

 

Mine are like yours Norman - a little cramp in there but not nearly as cramp as working on helicopters - lol

Merry HoHo to you and your

Ty Lee in snowy Montana USA

Sent from my iPhone

On Dec 17, 2017, at 2:33 AM, 'Norman Verona' norman@frenchblat.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:

 

I have a set of Melco Whitworth box spanners. The threads in the bell housing and setscrews have been cleaned and died and tapped. They will screw in by hand easily and then a box spanner tightens them. Takes a few seconds.

 

 

[b][i]Norman Verona[/i][/b]

11 Cherry Close, Royston, South Yorkshire S71 4LZ

Phone: 0044 (0)1226 728811

Mob: 0044 (0)741 9905 741

[b][i]Web: www.frenchblat.com[/i][/b]

 

[b]From:[/b] mg-tabc@yahoogroups.com [mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]'Tudor Studios' mailbox@tudorstudios.co.uk [mg-tabc] [b]Sent:[/b] 17 December 2017 08:32 [b]To:[/b] mg-tabc@yahoogroups.com [b]Subject:[/b] Re%3A [mg-tabc] TC Starter

 

 

Hi Listers,

I had my local machine shop turn down the heads of the bolts so that I could get my ring spanner/socket

over them. Still looks right, but perhaps a bit OTT.

Happy Christmas to all.

Regards Mike Bate.

MGTC10200 - Chilly Cornwall, UK.

Top
Ed Stanfield
Posts: 4
Joined: Fri Dec 21, 2007 6:30 am

Re: Re%3A [mg-tabc] TC Starter

Post by Ed Stanfield » Sun Dec 17, 2017 10:30 am

I agree on the Twin Cam. Try adjusting the points and moving distributor after running the engine.

 

Ed

TD/20709

 

[b]From:[/b] mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]'Norman Verona' norman@frenchblat.com [mg-tabc] [b]Sent:[/b] Sunday, December 17, 2017 11:32 AM [b]To:[/b] 'James Lee' [b]Cc:[/b] 'Tudor Studios'; mg-tabc@yahoogroups.com [b]Subject:[/b] RE: Re%3A [mg-tabc] TC Starter

 

 

James,

 

I think the worse old car to work on was the MGA Twin Cam. Getting the starter off that was major surgery.

 

I have this theory about modern cars. There s a secret award made to car designers for who can make the worst design for a mechanic to work on. Whoever designed the Mini Cooper S with the supercharger won the 2005 award.

 

 

[b][i]Norman Verona[/i][/b]

11 Cherry Close, Royston, South Yorkshire S71 4LZ

Phone: 0044 (0)1226 728811

Mob: 0044 (0)741 9905 741

[b][i]Web: www.frenchblat.com[/i][/b]

 

[b]From:[/b] James Lee [rmrmaintenance@aol.com] [b]Sent:[/b] 17 December 2017 15:27 [b]To:[/b] Norman Verona norman@frenchblat.com> [b]Cc:[/b] Tudor Studios mailbox@tudorstudios.co.uk>; mg-tabc@yahoogroups.com [b]Subject:[/b] Re: Re%3A [mg-tabc] TC Starter

 

Mine are like yours Norman - a little cramp in there but not nearly as cramp as working on helicopters - lol

Merry HoHo to you and your

Ty Lee in snowy Montana USA

Sent from my iPhone

On Dec 17, 2017, at 2:33 AM, 'Norman Verona' norman@frenchblat.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:

 

I have a set of Melco Whitworth box spanners. The threads in the bell housing and setscrews have been cleaned and died and tapped. They will screw in by hand easily and then a box spanner tightens them. Takes a few seconds.

 

 

[b][i]Norman Verona[/i][/b]

11 Cherry Close, Royston, South Yorkshire S71 4LZ

Phone: 0044 (0)1226 728811

Mob: 0044 (0)741 9905 741

[b][i]Web: www.frenchblat.com[/i][/b]

 

[b]From:[/b] mg-tabc@yahoogroups.com [mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]'Tudor Studios' mailbox@tudorstudios.co.uk [mg-tabc] [b]Sent:[/b] 17 December 2017 08:32 [b]To:[/b] mg-tabc@yahoogroups.com [b]Subject:[/b] Re%3A [mg-tabc] TC Starter

 

 

Hi Listers,

I had my local machine shop turn down the heads of the bolts so that I could get my ring spanner/socket

over them. Still looks right, but perhaps a bit OTT.

Happy Christmas to all.

Regards Mike Bate.

MGTC10200 - Chilly Cornwall, UK.

Top
James Lee
Posts: 8
Joined: Tue Apr 07, 2015 10:54 am

Re: Re%3A [mg-tabc] TC Starter

Post by James Lee » Sun Dec 17, 2017 10:59 am

You are exactly right - don t work on any cars you can t see the engine for the plastic - just change some oil and stuff if I can find the filters - haha James Lee Sent from my iPhone
On Dec 17, 2017, at 10:35 AM, SANDY SANDERS ESANE@msn.com> wrote:
#ygrps-yiv-2144664968 v\00003a* {} #ygrps-yiv-2144664968 o\00003a* {} #ygrps-yiv-2144664968 w\00003a* {} #ygrps-yiv-2144664968 .ygrps-yiv-2144664968shape {} Norman.        I saw a repeat of the program Wheeler Dealers involving a Lancia. To replace the alternator  Ed had to remove the front right suspension. A friend of mine had a toyota and had to loosen the front right fender to replace the battery. It prooves that there are jackasses in all designers. Sandy ----- Original Message ----- [b]From:[/b] mg-tabc-noreply@yahoogroups.com [b]To:[/b] rmrmaintenance@aol.com [b]Cc:[/b] mailbox@tudorstudios.co.uk ; mg-tabc@yahoogroups.com [b]Sent:[/b] Sunday, December 17, 2017 11:32 AM [b]Subject:[/b] RE: Re%3A [mg-tabc] TC Starter James,

 

I think the worse old car to work on was the MGA Twin Cam. Getting the starter off that was major surgery.

 

I have this theory about modern cars. There s a secret award made to car designers for who can make the worst design for a mechanic to work on. Whoever designed the Mini Cooper S with the supercharger won the 2005 award.

 

 

[b][i]Norman Verona[/i][/b]

11 Cherry Close, Royston, South Yorkshire S71 4LZ

Phone: 0044 (0)1226 728811

Mob: 0044 (0)741 9905 741

[b][i]Web: www.frenchblat.com[/i][/b]

 

[b]From:[/b] James Lee [rmrmaintenance@aol.com] [b]Sent:[/b] 17 December 2017 15:27 [b]To:[/b] Norman Verona norman@frenchblat.com> [b]Cc:[/b] Tudor Studios mailbox@tudorstudios.co.uk>; mg-tabc@yahoogroups.com [b]Subject:[/b] Re: Re%3A [mg-tabc] TC Starter

 

Mine are like yours Norman - a little cramp in there but not nearly as cramp as working on helicopters - lol

Merry HoHo to you and your

Ty Lee in snowy Montana USA

Sent from my iPhone

On Dec 17, 2017, at 2:33 AM, 'Norman Verona' norman@frenchblat.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:

 

I have a set of Melco Whitworth box spanners. The threads in the bell housing and setscrews have been cleaned and died and tapped. They will screw in by hand easily and then a box spanner tightens them. Takes a few seconds.

 

 

[b][i]Norman Verona[/i][/b]

11 Cherry Close, Royston, South Yorkshire S71 4LZ

Phone: 0044 (0)1226 728811

Mob: 0044 (0)741 9905 741

[b][i]Web: www.frenchblat.com[/i][/b]

 

[b]From:[/b] mg-tabc@yahoogroups.com [mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]'Tudor Studios' mailbox@tudorstudios.co.uk [mg-tabc] [b]Sent:[/b] 17 December 2017 08:32 [b]To:[/b] mg-tabc@yahoogroups.com [b]Subject:[/b] Re%3A [mg-tabc] TC Starter

 

 

Hi Listers,

I had my local machine shop turn down the heads of the bolts so that I could get my ring spanner/socket

over them. Still looks right, but perhaps a bit OTT.

Happy Christmas to all.

Regards Mike Bate.

MGTC10200 - Chilly Cornwall, UK.

Top
James Lee
Posts: 8
Joined: Tue Apr 07, 2015 10:54 am

Re: Re%3A [mg-tabc] TC Starter

Post by James Lee » Sun Dec 17, 2017 11:00 am

I believe the must have put MGA body on after engine was up and running on chassis James Sent from my iPhone
On Dec 17, 2017, at 10:56 AM, joecurto@aol.com wrote:
If you want something to give you greif try working on a push-rod MGA with a cross flow head , it makes distributor, starter and oil filter access almost impossible , and yes Norm the Twin cam was no joy Joe Curto 718-762-7878 www.joecurto.com -----Original Message----- From: SANDY SANDERS esane@msn.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> To: norman norman@frenchblat.com>; rmrmaintenance rmrmaintenance@aol.com> Cc: mailbox mailbox@tudorstudios.co.uk>; mg-tabc mg-tabc@yahoogroups.com> Sent: Sun, Dec 17, 2017 12:35 pm Subject: Re: Re%3A [mg-tabc] TC Starter   Norman.        I saw a repeat of the program Wheeler Dealers involving a Lancia. To replace the alternator  Ed had to remove the front right suspension. A friend of mine had a toyota and had to loosen the front right fender to replace the battery. It prooves that there are jackasses in all designers. Sandy ----- Original Message ----- [b]From:[/b] mg-tabc-noreply@yahoogroups.com [b]To:[/b] rmrmaintenance@aol.com [b]Cc:[/b] mailbox@tudorstudios.co.uk ; mg-tabc@yahoogroups.com [b]Sent:[/b] Sunday, December 17, 2017 11:32 AM [b]Subject:[/b] RE: Re%3A [mg-tabc] TC Starter James,   I think the worse old car to work on was the MGA Twin Cam. Getting the starter off that was major surgery.   I have this theory about modern cars. There s a secret award made to car designers for who can make the worst design for a mechanic to work on. Whoever designed the Mini Cooper S with the supercharger won the 2005 award.     [b][i]Norman Verona[/i][/b] 11 Cherry Close, Royston, South Yorkshire S71 4LZ Phone: 0044 (0)1226 728811 Mob: 0044 (0)741 9905 741 [b][i]Web: www.frenchblat.com[/i][/b]   [b]From:[/b] James Lee [rmrmaintenance@aol.com?] [b]Sent:[/b] 17 December 2017 15:27 [b]To:[/b] Norman Verona norman@frenchblat.com> [b]Cc:[/b] Tudor Studios mailbox@tudorstudios.co.uk>; mg-tabc@yahoogroups.com [b]Subject:[/b] Re: Re%3A [mg-tabc] TC Starter   Mine are like yours Norman - a little cramp in there but not nearly as cramp as working on helicopters - lol Merry HoHo to you and your Ty Lee in snowy Montana USA Sent from my iPhone On Dec 17, 2017, at 2:33 AM, 'Norman Verona' norman@frenchblat.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:   I have a set of Melco Whitworth box spanners. The threads in the bell housing and setscrews have been cleaned and died and tapped. They will screw in by hand easily and then a box spanner tightens them. Takes a few seconds.     [b][i]Norman Verona[/i][/b] 11 Cherry Close, Royston, South Yorkshire S71 4LZ Phone: 0044 (0)1226 728811 Mob: 0044 (0)741 9905 741 [b][i]Web: www.frenchblat.com[/i][/b]   [b]From:[/b] mg-tabc@yahoogroups.com [mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]'Tudor Studios' mailbox@tudorstudios.co.uk [mg-tabc] [b]Sent:[/b] 17 December 2017 08:32 [b]To:[/b] mg-tabc@yahoogroups.com [b]Subject:[/b] Re%3A [mg-tabc] TC Starter     Hi Listers, I had my local machine shop turn down the heads of the bolts so that I could get my ring spanner/socket over them. Still looks right, but perhaps a bit OTT. Happy Christmas to all. Regards Mike Bate. MGTC10200 - Chilly Cornwall, UK.
Top
Post Reply

Return to “MGATA”

Who is online

Users browsing this forum: No registered users and 7 guests