Parts needed

[BobAlley747@aol.com]

Last I heard Vintage & Classic Shock Absorbers in England was making new shock arms. Bob [Non-text portions of this message have been removed]

[Robert F.Butson.]

Just bought some arms/links from Vintage & Classic, first class....Bob. [Non-text portions of this message have been removed]

[Jennifer and Hugh Pite]

Hi Tim, I have several TD grill surrounds but only 1 TC surround. The TC surround is in poor condition and the TD ones range from completely restored to rough but restoreable. Can you let me know if you are still looking? Best Regards, Hugh

----- Original Message ----- From: tx-buckeyes@sbcglobal.net> To: "T-ABC Group" mg-tabc@yahoogroups.com> Sent: Wednesday, August 23, 2006 6:59 AM Subject: [mg-tabc] Parts Needed > Dear Listers: > > I recently purchased basket-case TC/9465 and am in need of a few > "unavailable" parts. Specifically, I need > two (2) front shock absorber arms and a decent (unbroken, uncracked) > grille surround. If anyone has any of these items, or knows where they > may be obtained, please contact me off-list. > > Also, I have 2 outside-laced 19" wheels suitable for TA or TB, if anyone > is in need!! Again, contact off-list. > > > Thanks for any help you can provide. > > Tim Moorhead > Dallas, TX > > [Non-text portions of this message have been removed] > > > > > Yahoo! Groups Links > > > > > > > >

[Thomas Latta]

List Members, The restoration of TC 1712 is progressing reasonably well. Amongst the parts I need are the following. 1. Passenger side tunning board 2. Front Splash Apron 3. Engine Bearer Plate 4. Distributor Thanks, Tom Latta (TC 1712) Rockport, ME 207-236-3063 [Non-text portions of this message have been removed]

[Mick Conde]

Tom - I think I have all the parts you need, I'll double check and get back to you tomorrow. rgds mick pittsburgh pa Thomas Latta talatta@adelphia.net> wrote: List Members, The restoration of TC 1712 is progressing reasonably well. Amongst the parts I need are the following. 1. Passenger side tunning board 2. Front Splash Apron 3. Engine Bearer Plate 4. Distributor Thanks, Tom Latta (TC 1712) Rockport, ME 207-236-3063 [Non-text portions of this message have been removed] --------------------------------- Sponsored Link $200,000 mortgage for $660/mo - 30/15 yr fixed, reduce debt, home equity - Click now for info [Non-text portions of this message have been removed]

[Doug Pelton]

Greetings, I am in need of the following items: Hand crank 28 1/2" total length. Brass end fittings for tire pump hose. (2 sets) Anyone know of a source for these? If someone needs a new tire pump hose, I have remanufactured them to include correct color and correct smooth crimped brass ferrules on each end. You will have to provide your old fittings. Contact me off list. Doug Pelton 3754 E Nance Circle Mesa, AZ 85215 602-690-4927 1948 TC 7410 EXU Dec 48 1949 TC 7670 EXU Jan 49

[David Lawley]

I am passing this on for a friend. David Lawley TC5904 Hoping you folks might be able to help. I need two 1 1/4 SU cards for my TC. I could get by with just the pots and dampers. I am also looking for a set of used, original TC seats in red. Thanks RK emgeeone@stny.rr.com [Non-text portions of this message have been removed]

[LuckyFloridaLin@aol.com]

Contact Joe Curto! In a message dated 6/2/2008 11:32:59 A.M. Eastern Daylight Time, stratfordmg@yahoo.com writes: I am passing this on for a friend. David Lawley TC5904 Hoping you folks might be able to help. I need two 1 1/4 SU cards for my TC. I could get by with just the pots and dampers. I am also looking for a set of used, original TC seats in red. Thanks RK _emgeeone@stny.emgeeo_ (mailto:emgeeone@stny.rr.com) [Non-text portions of this message have been removed] **************Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. (http://food.aol.com/tyler-florence?video=4&?NCID=aolfod00030000000002) [Non-text portions of this message have been removed]

[Peter Lund]

Yes! I can vouch for Joes quality and follow up!!! ----- Original Message ---- From: "LuckyFloridaLin@aol.com" LuckyFloridaLin@aol.com> To: stratfordmg@yahoo.com; mg-tabc@yahoogroups.com Cc: JoeCurto@aol.com Sent: Monday, June 2, 2008 12:07:16 PM Subject: Re: [mg-tabc] Parts needed Contact Joe Curto! In a message dated 6/2/2008 11:32:59 A.M. Eastern Daylight Time, stratfordmg@ yahoo.com writes: I am passing this on for a friend. David Lawley TC5904 Hoping you folks might be able to help. I need two 1 1/4 SU cards for my TC. I could get by with just the pots and dampers. I am also looking for a set of used, original TC seats in red. Thanks RK _emgeeone@stny. emgeeo_ (mailto:emgeeone@stny. rr.com) [Non-text portions of this message have been removed] ************ **Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. (http://food. aol.com/tyler- florence? video=4&? NCID=aolfod00030 000000002) [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

[BUD SILVERS]

Good morning all; As you all know I have bought an early TC that is undergoing restoration. Here is a list of things that I am looking for: 1. Early aluminum original Valve Cover. I would prefer to find an original, but would consider a reproduction if the price is right. I know Moss sells the reproduction ones and may buy one as a last resort. If you have one, please advise if it is original or reproduction, it's condition and price. 2. Pair of front spindles. These can be cracked in the axle. I am going to send them to Bob Grunau and have the axles replaced. 3. Bob Grunau oil filter adapter. 4. Two LED tail light inserts. (Negative Ground) Will probably buy new, but if anyone has some spares let me know. 5. Petronix ignition. (Negative Ground) Not sure which cam I have. Again, I will probably buy this new, but if you have a spare, let me know. 6. Pair of headlight reflectors. 7. Pair of Home Market dipping headlight reflectors. 8. One early headlight ring. I have the lenses and one ring. 9. Good original air cleaner. I have the manifold part and only need the steel air cleaner part. 10. New, used, or rebuilt 6 vane, bronze impeller water pump. 11. MGB fan blade. 12. I will think of more as I go along. I am also in the market for a TIG welder. I have used a Lincoln 175 and would prefer that, but would consider others that might be similar. Please send condition and price if you have something you would sell. If you have any of the above and are looking for something please send me the list and let's see if we can trade. I have not checked Moss or Abingdon for any of the above yet, but will do that soon. If you have any of the above items that you would sell, please contact me off list at mgtc@usaviator.net . Bud Silvers TC 1576 - Low n slo in the Black Forest of Colorado...... TC 8192 - Happily living in California now, but still in my heart and mind...... [Non-text portions of this message have been removed]