Crank handle

Post Reply
Ed Pohle
Posts: 4
Joined: Wed Jan 14, 2004 6:22 pm

Re: crank handle

Post by Ed Pohle » Thu Sep 15, 2005 5:53 pm

Jim - The 22" is correct - measured from end to inside 90 turn. Ed Pohle TC5856 Squaw Valley
----- Original Message ----- From: FDShade@aol.com> To: mg-tabc@yahoogroups.com> Sent: Wednesday, September 14, 2005 9:24 PM Subject: [mg-tabc] crank handle >I have two cranks - one is 19" and the other is 22" > Anyone know which is correct length for my '48 TC ? > > Jim Shade, West Covina CA > > > [Non-text portions of this message have been removed] > > > > > Yahoo! Groups Links > > > > > >
Top
Stew Koesten
Posts: 5
Joined: Thu Aug 19, 2004 1:33 pm

Re: crank handle

Post by Stew Koesten » Mon Sep 19, 2005 10:06 am

I'm just guessing but the longer one is probably for the TD/TCexu? Stew -----Original Message----- From: mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com] On Behalf Of FDShade@aol.com Sent: Wednesday, September 14, 2005 11:24 PM To: mg-tabc@yahoogroups.com Subject: [mg-tabc] crank handle I have two cranks - one is 19" and the other is 22" Anyone know which is correct length for my '48 TC ? Jim Shade, West Covina CA [Non-text portions of this message have been removed] Yahoo! Groups Links
Top
Post Reply

Return to “MGATA”

Who is online

Users browsing this forum: No registered users and 9 guests