heater instructions

Post Reply
sculptart@aol.com
Posts: 91
Joined: Tue May 16, 2000 3:43 pm

heater instructions

Post by sculptart@aol.com » Wed May 01, 2002 9:57 am

To all, Would anyone have the heater instructions for the Arnolt accessory heater in the t-series cars and would be willing to copy and mail to me? Better yet, scan and e-mail? It would help me in setting up the heater for a fall trip I am planning, and hope to have some cabin heat! Thanks in advance, Ben TC 4260

Dean Jensen
Posts: 122
Joined: Wed Dec 01, 1999 2:36 pm

Re: heater instructions

Post by Dean Jensen » Wed May 01, 2002 11:57 am

Ben I had an Arnolt heater in my TD and I drove the car in the winter in the fifties, I took it out some time ago, do not think I would ever put it back in. It would only put out at something less then 30 miles an hour, above that you could not tell it was working, it also did well at stop sign and railroad crossing. That was it! actually the gear shift lever was warmer. -----Original Message----- From: sculptart@aol.com [mailto:sculptart@aol.com] Sent: Wednesday, May 01, 2002 9:58 AM To: mg-tabc@yahoogroups.com Subject: [mg-tabc] heater instructions To all, Would anyone have the heater instructions for the Arnolt accessory heater in the t-series cars and would be willing to copy and mail to me? Better yet, scan and e-mail? It would help me in setting up the heater for a fall trip I am planning, and hope to have some cabin heat! Thanks in advance, Ben TC 4260 Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

R. Zwart
Posts: 54
Joined: Sat Jul 07, 2001 4:17 pm

Re: heater instructions

Post by R. Zwart » Wed May 01, 2002 12:36 pm

THAT SHOULDN'T BE TOO HARD; AFTER ALL, I PUT A 1934 BUICK HEATER IN MY 1949 MGTC IN 1952. And it worked for the midwest trips. BOB Takes a water to and from the radiator. sculptart@aol.com wrote:
> To all, > Would anyone have the heater instructions for the Arnolt accessory heater > in the t-series cars and would be willing to copy and mail to me? Better yet, > scan and e-mail? > It would help me in setting up the heater for a fall trip I am planning, > and hope to have some cabin heat! > Thanks in advance, Ben TC 4260 > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

R. Zwart
Posts: 54
Joined: Sat Jul 07, 2001 4:17 pm

Re: heater instructions

Post by R. Zwart » Wed May 01, 2002 12:40 pm

Where was your thermostat? BOB Dean Jensen wrote:
> Ben > I had an Arnolt heater in my TD and I drove the car in the winter in the > fifties, I took it out some time ago, do not think I would ever put it > back in. It would only put out at something less then 30 miles an hour, > above that you could not tell it was working, it also did well at stop > sign and railroad crossing. That was it! actually the gear shift lever > was warmer. > > -----Original Message----- > From: sculptart@aol.com [mailto:sculptart@aol.com] > Sent: Wednesday, May 01, 2002 9:58 AM > To: mg-tabc@yahoogroups.com > Subject: [mg-tabc] heater instructions > > To all, > Would anyone have the heater instructions for the Arnolt accessory > heater > in the t-series cars and would be willing to copy and mail to me? Better > yet, > scan and e-mail? > It would help me in setting up the heater for a fall trip I am > planning, > and hope to have some cabin heat! > Thanks in advance, Ben TC 4260 > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

John Patterson
Posts: 11
Joined: Mon Apr 24, 2000 4:24 pm

Re: heater instructions

Post by John Patterson » Wed May 01, 2002 1:14 pm

I will look thru my files to see if I still have the Arnolt heater instructions, however I removed the heater from TC 7025 since it, at best, warmed my left calf only. It is in a box for safe keeping. John Patterson TC 7025 REMEMBER: Duct tape is like the "FORCE", a light side, a dark side and holds the "Universe" together.

Dean Jensen
Posts: 122
Joined: Wed Dec 01, 1999 2:36 pm

Re: heater instructions

Post by Dean Jensen » Wed May 01, 2002 2:41 pm

The thermostat was working, and I had 3/4 of the radiator block off besides, at 50 or 60 the air exchange is so great that it feel like nothing. The heater was put in by a MG/Arnold dealer. Cheers Dean -----Original Message----- From: R. Zwart [mailto:zwart@earthlink.net] Sent: Wednesday, May 01, 2002 5:37 AM To: Dean Jensen Cc: mg-tabc@yahoogroups.com Subject: Re: [mg-tabc] heater instructions Where was your thermostat? BOB Dean Jensen wrote:
> Ben > I had an Arnolt heater in my TD and I drove the car in the winter in
the
> fifties, I took it out some time ago, do not think I would ever put it > back in. It would only put out at something less then 30 miles an
hour,
> above that you could not tell it was working, it also did well at stop > sign and railroad crossing. That was it! actually the gear shift
lever
> was warmer. > > -----Original Message----- > From: sculptart@aol.com [mailto:sculptart@aol.com] > Sent: Wednesday, May 01, 2002 9:58 AM > To: mg-tabc@yahoogroups.com > Subject: [mg-tabc] heater instructions > > To all, > Would anyone have the heater instructions for the Arnolt accessory > heater > in the t-series cars and would be willing to copy and mail to me?
Better
> yet, > scan and e-mail? > It would help me in setting up the heater for a fall trip I am > planning, > and hope to have some cabin heat! > Thanks in advance, Ben TC 4260 > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Donald Wilkinson
Posts: 108
Joined: Wed Mar 13, 2002 9:01 am

Re: heater instructions

Post by Donald Wilkinson » Wed May 01, 2002 8:19 pm

Digitaldon's 1949 TC still has the 1946 Packard limousine rear seat heater from one of his late father-in-law's cab company junked vehicles. It's 6 volts & has two cores; (one on each rear seat side). This was a natural for each side of the TC cockpit, with each unit simply series connected thru the 3 speed switch, rather than the original parallel connection from the 6 volt Packard. This made motoring in the nastiest Buffalo New York (USA) legendary winter weather almost comfortable. Don TC 7993
>From: "Dean Jensen" djensen@accessus.net> >To: mg-tabc@yahoogroups.com> >Subject: RE: [mg-tabc] heater instructions >Date: Wed, 1 May 2002 11:56:50 -0700 > >Ben >I had an Arnolt heater in my TD and I drove the car in the winter in the >fifties, I took it out some time ago, do not think I would ever put it >back in. It would only put out at something less then 30 miles an hour, >above that you could not tell it was working, it also did well at stop >sign and railroad crossing. That was it! actually the gear shift lever >was warmer. > >-----Original Message----- >From: sculptart@aol.com [mailto:sculptart@aol.com] >Sent: Wednesday, May 01, 2002 9:58 AM >To: mg-tabc@yahoogroups.com >Subject: [mg-tabc] heater instructions > >To all, > Would anyone have the heater instructions for the Arnolt accessory >heater >in the t-series cars and would be willing to copy and mail to me? Better >yet, >scan and e-mail? > It would help me in setting up the heater for a fall trip I am >planning, >and hope to have some cabin heat! > Thanks in advance, Ben TC 4260 > > > >Your use of Yahoo! Groups is subject to >http://docs.yahoo.com/info/terms/ > > > > > > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >
_________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx

joecurto@aol.com
Posts: 313
Joined: Wed Jul 19, 2000 3:42 am

heater instructions

Post by joecurto@aol.com » Thu May 06, 2010 7:05 am

Fellows I have Arnolt heater instructions printed have sent copies to Howard Schempp Jim Buell John Seim Ed Stanfield (pending address) Anyone else? I also have hand written notes for fitting heater to Arnolt MG as well as MGTF, these came from files I acquired from the purchase of the Solex components which came from Arnolt JOE CURTO INC _www.joecurto.com_ (http://www.joecurto.com/) joecurto@aol.com (718) 762 - 7878 -9-5 EST 22-09 126th Street College Point, NY 11356 [Non-text portions of this message have been removed]

Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests