Blumels TABC steering wheel ?

Post Reply
John G. Bulcken IV
Posts: 73
Joined: Tue Dec 18, 2001 12:05 pm

Blumels TABC steering wheel ?

Post by John G. Bulcken IV » Wed Apr 03, 2002 7:43 pm

Ok all,
Here is a question which might best be answered by a late TA or TB owner and perhaps early TC also. On the original Blumels three spoke steering wheels of the all black bakelite variety which were seen on all the Tickfords and the late TA and TB roadsters as well as the home market TCs there were two types of center pieces. One type is very thin brass with MG pressed in and used round head machine screws for mounting. Another type of center piece was much thicker with the MG machined in and used counter sunk machine screws, on this type the MG was some times filled in with red paint. Does any one know which type was originally on a TB ? Has any one been lucky enough to have their original still on the car...if you do you will also find a 39 date inside on the wheel and I would guess TAs had a date to.
Cheers,
John
TB#0398

John G. Bulcken IV
Posts: 73
Joined: Tue Dec 18, 2001 12:05 pm

Fw: [mg-tabc] Blumels TABC steering wheel ?

Post by John G. Bulcken IV » Thu Apr 04, 2002 6:29 am

[b]Subject:[/b] [mg-tabc] Blumels TABC steering wheel ? Ok all, Here is a question which might best be answered by a late TA or TB owner and perhaps early TC also. On the original Blumels three spoke steering wheels of the all black bakelite variety which were seen on all the Tickfords and the late TA and TB roadsters as well as the home market TCs there were two types of center pieces. One type is very thin brass with MG pressed in and used round head machine screws for mounting. Another type of center piece was much thicker with the MG machined in and used counter sunk machine screws, on this type the MG was some times filled in with red paint. Does anyone know which type was originally on a TB ? Has anyone been lucky enough to have their original still on the car...if you do you will also find a 39 date inside on the wheel and I would guess TAs had a date too. Cheers, John TB#0398 Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

DAI
Posts: 50
Joined: Tue Jun 27, 2000 3:55 pm

Re: Fw: [mg-tabc] Blumels TABC steering wheel ?

Post by DAI » Thu Apr 04, 2002 6:37 am

The New England MG T Register, R. Knudsen, mentions the thicker center piece as an aftermarket item. DAI --- "John G. Bulcken IV" cbrenner01@snet.net> wrote:
> Subject: [mg-tabc] Blumels TABC steering wheel ? > > > Ok all, > Here is a question which might best be answered > by a late TA or TB owner and perhaps early TC also. > On the original Blumels three spoke steering wheels > of the all black bakelite variety which were seen on > all the Tickfords and the late TA and TB roadsters > as well as the home market TCs there were two types > of center pieces. One type is very thin brass with > MG pressed in and used round head machine screws for > mounting. Another type of center piece was much > thicker with the MG machined in and used counter > sunk machine screws, on this type the MG was some > times filled in with red paint. Does anyone know > which type was originally on a TB ? Has anyone been > lucky enough to have their original still on the > car...if you do you will also find a 39 date inside > on the wheel and I would guess TAs had a date too. > Cheers, > John > TB#0398 > > Your use of Yahoo! Groups is subject to the Yahoo! > Terms of Service. > >
__________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com

Ray
Posts: 165
Joined: Sat Feb 03, 2007 10:55 pm

Re: Blumels TABC steering wheel ?

Post by Ray » Sat Apr 06, 2002 6:13 pm

I sort of like the JC Whitney wheel. Sorry John, lost it! Best, Ray
----- Original Message ----- From: "John G. Bulcken IV" cbrenner01@snet.net> To: "MG-TABC" mg-tabc@yahoogroups.com> Sent: Wednesday, April 03, 2002 9:43 PM Subject: [mg-tabc] Blumels TABC steering wheel ? Ok all, Here is a question which might best be answered by a late TA or TB owner and perhaps early TC also. On the original Blumels three spoke steering wheels of the all black bakelite variety which were seen on all the Tickfords and the late TA and TB roadsters as well as the home market TCs there were two types of center pieces. One type is very thin brass with MG pressed in and used round head machine screws for mounting. Another type of center piece was much thicker with the MG machined in and used counter sunk machine screws, on this type the MG was some times filled in with red paint. Does any one know which type was originally on a TB ? Has any one been lucky enough to have their original still on the car...if you do you will also find a 39 date inside on the wheel and I would guess TAs had a date to. Cheers, John TB#0398

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests