Tapered Roller Bearing Source

[Kenneth Enborg]

Please forgive me from intruding on the steering box debate. I am doing the front axle conversion on my '36 TA from ball to tapered roller bearings. My local NAPA auto parts store ( Michigan) had one of the bearings (Timken#07097) and the races (Timken# 07204) at quite reasonable prices but did not have the other bearing (Timken# 07079). Do any of you know a US source? Ken Enborg

[Robert Grunau]

Hi Ken, He should be able to order it. Or go to a bearing supplier directly. You can also use SKF or FAG 30205 inner brg ( 25 mm bore ) and 30304 ( 20 mm bore ) outer brg. SKF and FAG supply cup and cone as a set. Regards, Bob Grunau -----Original Message----- From: Kenneth Enborg [mailto:kenborg244264MI@comcast.net] Sent: Tuesday, February 26, 2002 8:28 PM To: mg-tabc@yahoogroups.com Subject: [mg-tabc] Tapered Roller Bearing Source Please forgive me from intruding on the steering box debate. I am doing the front axle conversion on my '36 TA from ball to tapered roller bearings. My local NAPA auto parts store ( Michigan) had one of the bearings (Timken#07097) and the races (Timken# 07204) at quite reasonable prices but did not have the other bearing (Timken# 07079). Do any of you know a US source? Ken Enborg Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.325 / Virus Database: 182 - Release Date: 2/19/02 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.325 / Virus Database: 182 - Release Date: 2/19/02

[Roger Furneaux]

Ken - if you have any trouble getting this American invention in America, I will happily supply from sleepy little Olde England. Always have a few in stock. PLS let me know how much you have to pay over the counter, I might be able to better it (inc. post) I am also going to make a small batch of longer spacers for the taper set-up. ocTagonally TCRoger

>He should be able to order it. Or go to a bearing supplier directly. You can >also use SKF or FAG 30205 inner brg ( 25 mm bore ) and 30304 ( 20 mm bore ) >outer brg. SKF and FAG supply cup and cone as a set. >Regards, Bob Grunau >Please forgive me from intruding on the steering box debate. I am doing the >front axle conversion on my '36 TA from ball to tapered roller bearings. My >local NAPA auto parts store ( Michigan) had one of the bearings >(Timken#07097) and the races (Timken# 07204) at quite reasonable prices but >did not have the other bearing (Timken# 07079). >Do any of you know a US source? >Ken Enborg > > > > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > >--- >Incoming mail is certified Virus Free. >Checked by AVG anti-virus system (http://www.grisoft.com). >Version: 6.0.325 / Virus Database: 182 - Release Date: 2/19/02 > >--- >Outgoing mail is certified Virus Free. >Checked by AVG anti-virus system (http://www.grisoft.com). >Version: 6.0.325 / Virus Database: 182 - Release Date: 2/19/02 > > > > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >