Re: TC Chassis Dimensions

[Walter Prechsl privat]

i ll pass ian s question on to the list please answer him directly at ==> richardson15@supanet.com thanks walter ________________________________________________________________________ Walter Prechsl Kappel cker 10 74182 Obersulm, Germany walter@publi-consult.com

----- Original Message ----- [b]From:[/b] richardson15@supanet.com [b]To:[/b] walter@publi-consult.com [b]Sent:[/b] Sunday, February 03, 2002 10:17 PM [b]Subject:[/b] TC Chassis Dimensions Good Afternoon, For a long time I have been seeking a TC chassis for a "new-build" but they never appear - even badly damaged ones. I know how toi cut and weld and, as the chassis rails seem quite simple, I am thinking about fabricating my own - but I need those critical dimensions. Are you aware of any members who may have measurements or templates they could share with me ? Regards, Ian Richardson, London

[C Sherriff]

Message text written by "Walter Prechsl privat"

> For a long time I have been seeking a TC chassis for a "new-build" but

they never appear - even badly damaged ones. I know how toi cut and weld and, as the chassis rails seem quite simple, I am thinking about fabricating my own - but I need those critical dimensions. Are you aware of any members who may have measurements or templates they could share with me ? Regards, Ian R................ ==================================================== By the sound of this I suggest the answer should be a firm NO and end of conversation !!! Clive

[Dave Norris]

Ian, You could try [img]http://www.naylorbrothers.co.uk/images/ ... T175-2.gif[/img] [img]http://www.naylorbrothers.co.uk/images/ ... logo-4.gif[/img] [img]http://www.naylorbrothers.co.uk/images/ ... WMT175.gif[/img]

[quote] [b]Specialists in chassis repair and restoration for [u]all[/u] Vintage and Classic cars.[/b] [b]Alvis - Aston Martin - Austin Healey - Bentley - Bugatti - Maserati - MG - Jaguar - Jensen - Jowett - Rolls Royce - Triumph - etc.[/b]

[b]Chassis Build is a long established Company based originally in Stafford and now in Shipley, West Yorkshire. We have a world-wide reputation for quality, technical expertise and service. We offer full repair, refurbishment, and restoration services in a single location for both Pre and Post-war chassis. We believe this combined service is unique, so if your chassis frame is suffering from the ravages of time, rust or misuse, Chassis Build provide the professional service you need. We can even supply complete replacement chassis frames.[/b] [b]Please [/b][b]contact us[/b][b] to discuss your specific requirements.[/b] [b]Chassis Build Limited Hollins Hill, Shipley, West Yorkshire BD17 7QN, England Tel: +44 (0) 1274 590590 Fax: +44 (0) 1274 532772[/b][b] [/b] chassis@naylorbrothers.co.uk [/quote] Hmmmm...Naylor Brothers....sounds familiar..... Also, the following used to advertise in the Octagon Car Club Bulletin (http://www.mgoctaogoncarclub.com) : I Murley Unit 6 Holly Park Mill Woodhall Road Calverley Leeds LS28 5QS tel. 0113 257 1134, 01274 611068 eves "Chassis all types. Chassis repair, straightening. rebuild with new side rails. Sections and parts supplied." Hope this helps, Dave TC9964 Cold, wet, windy, "I'll do the Kimber memorial thing another time", Aberdeen ----- Original Message ----- [b]From:[/b] walter@publi-consult.com [b]To:[/b] richardson15@supanet.com [b]Cc:[/b] mg-tabc@yahoogroups.com [b]Sent:[/b] Sunday, February 03, 2002 9:32 PM [b]Subject:[/b] [mg-tabc] Re: TC Chassis Dimensions i ll pass ian s question on to the list please answer him directly at ==> richardson15@supanet.com thanks walter ________________________________________________________________________ Walter Prechsl Kappel cker 10 74182 Obersulm, Germany walter@publi-consult.com ----- Original Message ----- [b]From:[/b] richardson15@supanet.com [b]To:[/b] walter@publi-consult.com [b]Sent:[/b] Sunday, February 03, 2002 10:17 PM [b]Subject:[/b] TC Chassis Dimensions Good Afternoon, For a long time I have been seeking a TC chassis for a "new-build" but they never appear - even badly damaged ones. I know how toi cut and weld and, as the chassis rails seem quite simple, I am thinking about fabricating my own - but I need those critical dimensions. Are you aware of any members who may have measurements or templates they could share with me ? Regards, Ian Richardson, London Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.