Threaded inserts for the 1X8 mm threads are available in the US. When I
replaced the clutch in my TC, the bolts from the bell housing to the oil
pan were replaced with 5/16NC bolts! I got the helicoil kit from my
local auto parts store. They didn't have them in the store, but got them
from their warehouse in a couple of days. The M8X1 kit contains about a
dozen inserts, the special tap and an insertion tool. Helicoil part
number is 5542-8. The only other thing you need is a 21/64" drill bit.
With the inserts, you can use the original bolts and not worry about
stripping out the threads in the crankcase.
Regards,
Charles Hill
Re: Stripped threads
Who is online
Users browsing this forum: No registered users and 8 guests