Pushrods

[brian bax]

Does anyone know who can supply a set of TD2 shorter pushrods? I have skimmed the head on my TC engine and the push rods currently fitted are one piece so can't be shortened.Thanks,Brian

[C Sherriff]

Message text written by brian bax

>Does anyone know who can supply a set of TD2 shorter pushrods? I

have skimmed the head on my TC engine and the push rods currently fitted are one piece so can't be shortened.Thanks,Brian

[John T. Seim]

Moss Motors offers a shorter set of Crane push-rods (8.531") vs late TD/TF push rods effective length of 8.62". TC-early TD, length was slightly longer. Part number is 433-335. $72.45 list price from Moss. John Seim Irvine, CA

[joecurto@aol.com]

Brian if those are original push rods they are 3 pieces, usually there are ones that have loose ends and it would be easy to disassemble and shorten and re assemble and spot weld. Joe

[Ron Benson]

Hi All, Some time ago in the UK I bought some solid pushrods for the XPAG from an advert I believe in the Octagon magazine. As I cannot remember who I got them off and I would like some more, I wondered if anyone one the list can remember if there had been a batch made or if they are from another engine. Regards, Ron Benson [Non-text portions of this message have been removed]

[laf48@aol.com]

I am a Manton dealer. Call me for prices. Len 914 420 8699 [Non-text portions of this message have been removed]