PART NEEDED
-
- Posts: 55
- Joined: Wed Feb 14, 2001 8:34 am
PART NEEDED
Faithfull- I am looking for a medallion for my PA that goes in the center of
the spare tire lock. It is the same as an ABC. If anyone has a spare for
sale, please let me know. I would also be interested in a pair of #160
Lucas mirrors as well. THANKS
Mick
Keystone Classic Cars LTD
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
-
- Posts: 55
- Joined: Wed Feb 14, 2001 8:34 am
part needed
Good morning group - I'm looking for hens teeth again. Need a 5" round RH (drivers side) NOS Lucas mirror for a friend, thru 1965 would be OK. If anyone happens to have one, please contact me off-group with the details. rgds....................Mick
[Non-text portions of this message have been removed]
-
- Posts: 3
- Joined: Wed Mar 29, 2006 5:12 pm
part needed
To all,
I am in need of two rectangular rubber ferrules for the headlamp to radiator shell mounting. The Moss Motors part number is 281-018.
It is a simple matter to order from Moss but I only need this item, it is below minimum plus shipping is costly for one item only.
Anyone have 2 of these excess to their needs?
Ben Cordsen
_________________________________________________________________
Hotmail is redefining busy with tools for the New Busy. Get more from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_2
[Non-text portions of this message have been removed]
-
- Posts: 30
- Joined: Tue Apr 27, 2010 10:56 am
Part needed
Hi Group-
I am in need of the RH and LH front shock mounting bracket and pin. This is
the bracket that fits under the front spring. Thanks for your help.
Jim Buell
Blanchard, ID
TC9806
[Non-text portions of this message have been removed]
-
- Posts: 72
- Joined: Thu Nov 28, 2002 1:28 pm
Re: Part needed
Jim,
The pin is easy to make, I'll send you the dimensions if you like.
Peter.
On 8 September 2010 19:03, Jim Buell gmparcr@lambgroupinc.net> wrote: > > > Hi Group- > > I am in need of the RH and LH front shock mounting bracket and pin. This is > the bracket that fits under the front spring. Thanks for your help. > > Jim Buell > > Blanchard, ID > > TC9806 > > [Non-text portions of this message have been removed] > > > [Non-text portions of this message have been removed]
-
- Posts: 39
- Joined: Sat Aug 09, 2003 5:12 pm
Re: Part needed
Jim,
Having just overhauled the springs for my Q-TA I think what you want are the upper plates of the front spring that the shock link attaches to. The shock link mounts to the upper plate at the front and the lower plate at the rear.
Regards,
--
Frank
frankgraham@msn.com
--
[Non-text portions of this message have been removed]
-
- Posts: 1
- Joined: Sat May 15, 2010 7:12 am
Part Needed
Dear Listers -
While doing some trial fitting of body pieces prior to painting we discovered that we have two RH front wing supports for TC2278 but no LH support. Does anyone have a LH support that we can beg, borrow, steal or buy?
Moss has them - $140 - but at this point we're on the cheap.
Please reply off-list or call 214-557-9341,
Thanks in advance,
Tim Moorhead
Dallas, TX
-
- Posts: 1
- Joined: Sun Jan 15, 2006 6:05 pm
Part Needed
MG Folks,
I am looking for an original right side door handle. I would appreciate any help.Thanks.
Jane Schmitt TCEXU 8237
-
- Posts: 30
- Joined: Tue Apr 27, 2010 10:56 am
Part needed
Hi Group- I am in need of (1) oil filter strap (ref Moss 435-310) – which is a pair, but I only need one. If you have one that is excess to your needs please let me know. Thanks Jim Buell1949 TC1974 BGT (Basket Case)Blanchard, ID 83804-9546(208) 771-0087gmparcr@lambgroupinc.net
-
- Posts: 30
- Joined: Tue Apr 27, 2010 10:56 am
Re: Part needed
Attachments :
- [*][url=file:///C:\Users\Steve\AppData\Local\PG Offline 4\Attachments\\DSCN0623.JPG]DSCN0623.JPG[/url]
Who is online
Users browsing this forum: No registered users and 8 guests