Brake rubbers

[capaciousmg@aol.com]

TABC Does anyone know of a company that supplies british brake rubbers seals for the wheel cylinders? I need larger sizes than a TC. I need 1 1/4" bore and 1 3/8" bore. I need the dust boots as well. Joe Potter Eugene, Oregon USA http://hometown.aol.com/jtpaki/index.html

[Robert Grunau]

Wagner/Lockheed supply 1 3/8 brake rubbers made in USA. I think they also supply 1 .

BTW, 1 rubbers are same as MGA clutch slave rubbers so should be available from Moss.

I have 6 new 1 3/8 rubbers if desperate. Also have some 1 but can t find my MGA clutch cache just now. MGA clutch slave dust boots may fit as well.

Try your local Wagner UAP? Dealer.

Bob Grunau

TABC Does anyone know of a company that supplies british brake rubbers seals for the wheel cylinders? I need larger sizes than a TC. I need 1 1/4" bore and 1 3/8" bore. I need the dust boots as well. Joe Potter Eugene, Oregon USA http://hometown.aol.com/jtpaki/index.html> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Brian Rainbow]

Joe, try a UK based company called Coastings Limited. It is only a small one man band, but Tom Robertson (the proprietor) can supply almost anything you require in the automotive braking arena. I don't know if he is contactable via e-mail, however his telephone number is 0044-973-710473 or you can fax him on 0044-1564-702388 . The company is situated at Earlswood near Solihull in the centre of England! Best wishes, Brian Rainbow Leamington Spa, U.K. PA0777 and TA2551