TA/TB Chassis Clips

[JohnHWSteedman@aol.com]

Dave McCartney in the UK has gone to some trouble and personal expense researching and manufacturing complete chassis clip sets for the TA & TB. He would like to clear the last 10 sets and is selling at cost. He does not want to sell items individually. Many of the clips are common to the TC and I can vouch for their quality. The set comprises: 1 large nickel plated stripc clip to fix the break line to the chassis cross member 1 black phosphate "twisted clip" securing the battery cable to the starter. 1 black phosphate clip securing the slow running control to the carbs 1 aluminium strip clip securing the fog lamp wire to the front chassis cross member 1 brass clip holding the two petrol pipes together (rare I'm told) 1 nickel plated clip securing the brakepipe to the axle web 2 black phosphate clips securing the wiring harness to the front chassis crossmember 1 nickel plated clip securing the brake line on the top left hand mounting bolt, on near side bracket of the rear shockers 11 black phosphate clips securing wiring harness. 3 b.p clips securing speedo and rev counter cables under dash and engine 1 nickel plated (not on TA) clip securing Bowden cable to anchor bracket for slow running control. 1 brass clip securing carb vent pipes to engine 14 black phospate P-clips for fuel line. 3 b.p. half clips for securing wire harness to bulkhead 5 b.p half clips for brake line 7 b.p spring clips for wiring harness to chassis. 3 nickel plated clips securing starter pull, slow running, mixture to bulkhead. 3 b.p. clips securing brake line to rear axle. Dave is not on the Internet, so if you are interested in a set at 76 + postage please call him on 44 (0) 1606 891 577 (UK time!). Dave stresses that this is not a money making venture and he would prefer to help TA and TBers. John Steedman TC 0301