Fw: TF Oil Cooler

[Walter Prechsl privat]

can we help ray at => :rayt@turboweb.net.au ? walter

----- Original Message ----- [b]From:[/b] rayt@turboweb.net.au [b]To:[/b] walter@publi-consult.com [b]Sent:[/b] Sunday, June 10, 2001 1:38 AM [b]Subject:[/b] TF Oil Cooler Walter, have you or any of your colleagues seen an oil cooler set up for a TF? I have seen a sandwich plate which goes between the filer canister and the pump body, and this has two hoses which run to a standard oil cooler radiator. They were supplied by Naylor's some many years ago, but now, sadly, no one there knows what I am talking about. Hear from you soon. Ray Tolcher Australia

[erwin.lifestyle@t-online.de]

I know that it is possible - read about a kit quuite recently but can't remeber where. I'm at Silverstone in a couple of weeks - I'll ask the racers what they do when I'm there. Brian

-----Urspr ngliche Nachricht----- [b]Von:[/b] walter@publi-consult.com [b]An:[/b] mg-tabc@yahoogroups.com [b]Gesendet:[/b] Sonntag, 10. Juni 2001 11:56 [b]Betreff:[/b] [mg-tabc] Fw: TF Oil Cooler can we help ray at => rayt@turboweb.net.au ? walter ----- Original Message ----- [b]From:[/b] rayt@turboweb.net.au [b]To:[/b] walter@publi-consult.com [b]Sent:[/b] Sunday, June 10, 2001 1:38 AM [b]Subject:[/b] TF Oil Cooler Walter, have you or any of your colleagues seen an oil cooler set up for a TF? I have seen a sandwich plate which goes between the filer canister and the pump body, and this has two hoses which run to a standard oil cooler radiator. They were supplied by Naylor's some many years ago, but now, sadly, no one there knows what I am talking about. Hear from you soon. Ray Tolcher Australia Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[erwin.lifestyle@t-online.de]

Knew I'd seen it. Moss do one - page 4 of their latest catalogue. Article No. 235-945. German Importers are Limora (Tel +49.2683.7064) or Moss direct in the UK. Good Luck! Brian Chase

-----Urspr ngliche Nachricht----- [b]Von:[/b] finethings@classic-lifestyle.com [b]An:[/b] mg-tabc@yahoogroups.com ; walter@publi-consult.com [b]Gesendet:[/b] Sonntag, 10. Juni 2001 12:25 [b]Betreff:[/b] Re: [mg-tabc] Fw: TF Oil Cooler I know that it is possible - read about a kit quuite recently but can't remeber where. I'm at Silverstone in a couple of weeks - I'll ask the racers what they do when I'm there. Brian -----Urspr ngliche Nachricht----- [b]Von:[/b] walter@publi-consult.com [b]An:[/b] mg-tabc@yahoogroups.com [b]Gesendet:[/b] Sonntag, 10. Juni 2001 11:56 [b]Betreff:[/b] [mg-tabc] Fw: TF Oil Cooler can we help ray at => rayt@turboweb.net.au ? walter ----- Original Message ----- [b]From:[/b] rayt@turboweb.net.au [b]To:[/b] walter@publi-consult.com [b]Sent:[/b] Sunday, June 10, 2001 1:38 AM [b]Subject:[/b] TF Oil Cooler Walter, have you or any of your colleagues seen an oil cooler set up for a TF? I have seen a sandwich plate which goes between the filer canister and the pump body, and this has two hoses which run to a standard oil cooler radiator. They were supplied by Naylor's some many years ago, but now, sadly, no one there knows what I am talking about. Hear from you soon. Ray Tolcher Australia Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[John T. Seim]

Brown & Gammons sells a cooler kit for the TD-TF. Perma-Cool in the USA makes an adapter ring. A hollow bolt would have to be made, for securing the adapter to the oil pump. This would allow for an oil cooler with a spin on oil filter. I have done research on this, but found the market too small to move from deevelopment work. John Seim Irvine, CA