My Article on Steering and Chassis Set up

[C Sherriff]

Hi all, Many moons ago I sat up too late one evening and wrote in defence of TABC original steering and how to get it right. This seems to be an ongoing problem as every so often the old chestnuts of toe in, wedges, axles etc come out and are mulled over. The atached articli is in fact being published in the Octagon CC Bulletin at present ( nay - even serialised !!!) but this is it in all its totality. If you cant read this version let me know off list and I'll try another format. Walter - Perhaps this should go in the Tech section if noone has any objections? Regards Clive

[Crystal Brenner]

THANKS ! Great article Clive...hope it goes in the tech. section....Very informative indeed ! Cheers, Crystal and John TB#0398

----- Original Message ----- From: "C Sherriff" 100070.740@compuserve.com> Cc: "[unknown]" mg-tabc@yahoogroups.com> Sent: Monday, June 04, 2001 8:50 AM Subject: [mg-tabc] My Article on Steering and Chassis Set up > Hi all, > > Many moons ago I sat up too late one evening and wrote in defence > of TABC original steering and how to get it right. > > This seems to be an ongoing problem as every so often the old chestnuts > of toe in, wedges, axles etc come out and are mulled over. > > The atached articli is in fact being published in the Octagon CC Bulletin > at present ( nay - even serialised !!!) but this is it in all its totality. > > If you cant read this version let me know off list and I'll try another > format. > > Walter - Perhaps this should go in the Tech section if noone has any > objections? > > Regards > > Clive > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >