FRAME MEASURERMENTS FOR TA FRAME

[Carlyle Merritt]

[b]I NEED TO DO SOME FRAME WORK ON MY TA - DOES ANYONE HAVE THE [/b] [b]MEASUREMENTS[/b]

[DAVID DARRELL]

[b]IS IT AN EARLY OR LATE TA?[/b] [b]I HAVE BODIES FOR BOTH BUT THEY ARE IN A BAD STATE OF REPAIR WITH MANY MODIFICATIONS OVER THE YEARS BUT SOME MEASUREMENTS ARE OK IF YOU LET ME KNOW WHAT YOU WANT.[/b] [b]I WOULD ALSO LIKE A NUMBER OF MEASUREMENTS IE THE WIDTH OF THE FRAME AT THE TOP OF THE DOOR HANGING PILLARS ETC?[/b] [b]I DO HAVE A LIST OF THE DIFFERENCES BETWEEN LATE AND EARLY TA BODIES WHICH WERE MAINLY TO THE CENTRE SECTION (DIFF COVER SIDESCREEN COVER AND REAR BODY BEHIND FUEL TANK) THE REMAINDER WOULD SEEM TO BE THE SAME OR AM I WRONG?[/b] [b]DO ANY MEMBERS HAVE THESE MEASUREMENTS?[/b] [b]DAVID DARRELL [/b] [b]TA 0455 [/b] DAVID@DDARRELL.FREESERVE.CO.UK ---- Original Message ----- [b]From:[/b] carlyle@merritt-computer.com [b]To:[/b] mg-tabc@yahoogroups.com [b]Sent:[/b] Thursday, March 01, 2001 11:17 PM [b]Subject:[/b] [mg-tabc] FRAME MEASURERMENTS FOR TA FRAME [b]I NEED TO DO SOME FRAME WORK ON MY TA - DOES ANYONE HAVE THE [/b] [b]MEASUREMENTS[/b] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.