has anyone used the d and d muffler kit ?

[chris kelly]

What brand ? Were you happy with it ?

 

you may think you can, & you make think you can't... and you're right!!

[RobertWichert]

Progressive.  Not the upsell with the remote adjustment, just the basic model.  Supposedly lowered 1", but it wasn't really any lower.  I suppose I could sag it an inch, but it's much stiffer than stock and I like it a lot.  If you actually want to adjust it, get the remote adjuster.  It's too much trouble to adjust it with the standard setup. Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 ===============================================

On 11/24/2013 9:13 PM, chris kelly wrote:

  What brand ? Were you happy with it ?   you may think you can, & you make think you can't... and you're right!!

[Ron Haraseth]

  Ricor IAS w/500# spring.[i]  [/i]I weigh 250# plus camping gear.  Much better match. Downside hard to set preload.  No damping adjust, but it is set up pretty good as delivered.  They set up according to your personal info, weight, style of riding etc. Matches Ricor front Intiminators well. ===============================================

On 11/24/2013 9:13 PM, chris kelly wrote:   What brand ? Were you happy with it ?   you may think you can, & you make think you can't... and you're right!!

[mark ward]

I SHOULD have, gotten the remote adjuster. At 255lbs. For normal daily or trail riding, adjusting my Progressive kind of firm worked well, BUT! When I ALSO LOAD IT DOWN with another 150-200 PLUS? pounds (Camping & Fishing, ETC ETC. gear) It needs MORE "adjustment", BUT trying to get in there with the tools to tighten more? = HEAD ACHE. So I just leave it and ride LOW. Debating going threw ALL THE WORK for changing it, selling the NON-remote adjuster one  o E-bay and installing a remote one.  If you do NOT LOAD IT DOWN with extra gear, the regular Progressive one is fine. (BEATS the hell out of stock.)

[b]From:[/b] RobertWichert [b]To:[/b] klr DSN_klr650@yahoogroups.com> [b]Sent:[/b] Monday, November 25, 2013 10:31 AM [b]Subject:[/b] Re: [DSN_KLR650] Has anyone upgraded rear shock ?   Progressive.  Not the upsell with the remote adjustment, just the basic model.  Supposedly lowered 1", but it wasn't really any lower.  I suppose I could sag it an inch, but it's much stiffer than stock and I like it a lot.  If you actually want to adjust it, get the remote adjuster.  It's too much trouble to adjust it with the standard setup. Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 =============================================== On 11/24/2013 9:13 PM, chris kelly wrote:   What brand ? Were you happy with it ?   you may think you can, & you make think you can't... and you're right!!

[Fred Hink]

The PS shock with the remote preload adjuster or without is the same shock.  I believe I can get you just the preload adjuster you can add to your 465 series shock.  I also found it easier to adjust the preload on the non remote models shocks by removing the shock and making your adjustment with the shock off the bike.  If you have a center stand it s a five minute job to remove the PS shock and make the adjustment.   Fred http://www.arrowheadmotorsports.com   [b]From:[/b] nomad59@... [b]Sent:[/b] Monday, November 25, 2013 9:25 AM [b]To:[/b] robert@... ; DSN_klr650@yahoogroups.com [b]Subject:[/b] Re: [DSN_KLR650] Has anyone upgraded rear shock ?    

I SHOULD have, gotten the remote adjuster.   At 255lbs. For normal daily or trail riding, adjusting my Progressive kind of firm worked well, BUT!   When I ALSO LOAD IT DOWN with another 150-200 PLUS? pounds (Camping & Fishing, ETC ETC. gear)   It needs MORE "adjustment", BUT trying to get in there with the tools to tighten more? = HEAD ACHE.   So I just leave it and ride LOW.   Debating going threw ALL THE WORK for changing it, selling the NON-remote adjuster one  o E-bay and installing a remote one.   If you do NOT LOAD IT DOWN with extra gear, the regular Progressive one is fine. (BEATS the hell out of stock.)

[b]From:[/b] RobertWichert [b]To:[/b] klr DSN_klr650@yahoogroups.com> [b]Sent:[/b] Monday, November 25, 2013 10:31 AM [b]Subject:[/b] Re: [DSN_KLR650] Has anyone upgraded rear shock ?   Progressive.  Not the upsell with the remote adjustment, just the basic model.  Supposedly lowered 1", but it wasn't really any lower.  I suppose I could sag it an inch, but it's much stiffer than stock and I like it a lot.  If you actually want to adjust it, get the remote adjuster.  It's too much trouble to adjust it with the standard setup. Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 =============================================== On 11/24/2013 9:13 PM, chris kelly wrote:   What brand ? Were you happy with it ?   you may think you can, & you make think you can't... and you're right!!

[Fred Hink]

Do you mean a DG exhaust?  This is a low cost muffler that is very loud and probably one I  wouldn t take on a long trip. http://www.angelfire.com/ut/moab/images/dg_oseriesex.jpg   Fred http://www.arrowheadmotorsports.com   [b]From:[/b] onephreeone@... [b]Sent:[/b] Sunday, November 24, 2013 10:19 PM [b]To:[/b] DSN_klr650@yahoogroups.com [b]Subject:[/b] [DSN_KLR650] Has anyone used the D and D muffler kit ?    

Not looking for flame war, just response from people who have used this muffler kit. Manufacturer  alleges 8-10% horsepower and torque increase   you may think you can, & you make think you can't... and you're right!!

[RobertWichert]

How much for the remote kit, Fred? Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 ===============================================

On 11/25/2013 9:07 AM, Fred Hink wrote:

The PS shock with the remote preload adjuster or without is the same shock. I believe I can get you just the preload adjuster you can add to your 465 series shock. I also found it easier to adjust the preload on the non remote models shocks by removing the shock and making your adjustment with the shock off the bike. If you have a center stand it s a five minute job to remove the PS shock and make the adjustment. Fred http://www.arrowheadmotorsports.com [b]From:[/b] nomad59@... [b]Sent:[/b] Monday, November 25, 2013 9:25 AM [b]To:[/b] robert@... ; DSN_klr650@yahoogroups.com [b]Subject:[/b] Re: [DSN_KLR650] Has anyone upgraded rear shock ? I SHOULD have, gotten the remote adjuster. At 255lbs. For normal daily or trail riding, adjusting my Progressive kind of firm worked well, BUT! When I ALSO LOAD IT DOWN with another 150-200 PLUS? pounds (Camping & Fishing, ETC ETC. gear) It needs MORE "adjustment", BUT trying to get in there with the tools to tighten more? = HEAD ACHE. So I just leave it and ride LOW. Debating going threw ALL THE WORK for changing it, selling the NON-remote adjuster one o E-bay and installing a remote one. If you do NOT LOAD IT DOWN with extra gear, the regular Progressive one is fine. (BEATS the hell out of stock.) [b]From:[/b] RobertWichert robert@... [b]To:[/b] klr DSN_klr650@yahoogroups.com [b]Sent:[/b] Monday, November 25, 2013 10:31 AM [b]Subject:[/b] Re: [DSN_KLR650] Has anyone upgraded rear shock ? Progressive. Not the upsell with the remote adjustment, just the basic model. Supposedly lowered 1", but it wasn't really any lower. I suppose I could sag it an inch, but it's much stiffer than stock and I like it a lot. If you actually want to adjust it, get the remote adjuster. It's too much trouble to adjust it with the standard setup. Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 =============================================== On 11/24/2013 9:13 PM, chris kelly wrote: What brand ? Were you happy with it ? you may think you can, & you make think you can't... and you're right!!