turn signal switch

[Fred Hink]

This switch comes wired as a universal switch and can be rewired to work on most bikes. I rewire it to work on the older KLR, so I m sure it could be rewired to fit the late model as well. The only problem I see is that the plug that comes with this switch is a nine pin like the early KLR uses and the late model has a six pin plug. So there may be an issue there. Fred http://www.arrowheadmotorsports.com From: RobertWichert Sent: Thursday, April 25, 2013 2:01 PM To: skypilot2 Cc: DSN_KLR650@yahoogroups.com Subject: Re: [DSN_KLR650] Turn signal switch * KLR650 PlugnPlay LH Switch * Item # 16-0030 http://www.angelfire.com/ut/moab/images/switch.jpg Push to Cancel Turn Signal, Head Light/ High-Low-Off - Parking - Passing, Horn, 16"wire, Nine pin connector *Will also need Mirror Adapter sold below * http://www.angelfire.com/ut/moab/images/mirror-choke_mt2.jpg All pics from http://www.angelfire.com/ut/moab/index.html This switch is great. The push-to-cancel rules. I honestly don't know if this works on '08 and later... Fred? Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 ===============================================

On 4/25/2013 12:53 PM, skypilot2 wrote: > > Does anyone have a better idea for a signal > light switch than Kawasaki? > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]