battery condition based on voltage reading
-
- Posts: 2246
- Joined: Fri Oct 10, 2003 6:02 pm
battery condition based on voltage reading
Listers,
I think the same or similar info was posted in 2008. Below is the
original post pulled from my files.
This info is for battery condition and not charging system condition. Of
course you can't check a charging system if the battery isn't fully
charged and in good condition.
Best,
Jeff Saline
ABC # 4412 South Dakota Airmarshal
Airheads Beemer Club www.airheads.org
The Beautiful Black Hills of South Dakota
75 R90/6, 03 KLR650
<><><><><><><><><>
<><><><><><><><><>
--------- Forwarded message ----------
From: Jeff Saline
To: DSN_klr650@yahoogroups.com
Date: Fri, 11 Apr 2008 14:17:53 -0600
Subject: [DSN_KLR650] Battery Condition Based on Voltage Reading
Message-ID:
Listers,
The below information was recently posted to the airheads list. It was
first posted there 10 years ago. I thought some of you may find it
useful.
Best,
Jeff Saline
ABC # 4412 South Dakota Airmarshal
Airheads Beemer Club www.airheads.org
The Beautiful Black Hills of South Dakota
75 R90/6, 03 KLR650, 79 R100RT
<><><><><><><><><>
<><><><><><><><><>
This is from the Jan-Feb issue of Solar Today; a magazine aimed at those
"off the grid". Seems to fit with our current (and perennial) discussion
of batteries and charging systems. You do need a digital voltmeter, the
readings are at 70 degrees F and are for lead-acid batteries. You want
to wait about 15 minutes or more after charging the battery or running
the bike to allow the "surface charge" to disappate. I put this table on
a little card and keep it with the VOM.
Percent Voltage
of charge: Reading:
100% 12.63
90% 12.54
80% 12.45
70% 12.36
60% 12.27
50% 12.18
40% 12.09
30% 12.00
20% 11.91
0% 11.82
------------------------------------
.
.
____________________________________________________________
View YOUR Background Check
Step 1) Enter A Name and State. Step 2) Access U.S Public Records
http://thirdpartyoffers.juno.com/TGL3141/50f19a8a88abf1a8a3aa5st02vuc
-
- Posts: 27
- Joined: Tue Dec 06, 2011 11:27 am
jack question
Is it ok to leave a bike on a motorcycle jack for long periods of time? Wondering if it may warp or put undue stress on anything.
Crash
-
- Posts: 697
- Joined: Sun Jan 10, 2010 11:32 am
jack question
Uh, maybe the tires will get too round?
I can't think of anything, as long as Jack doesn't mind.
I gotta million of 'em!
Robert Wichert P.Eng. LEED AP BD&C
+1 916 966 9060
FAX +1 916 966 9068
===============================================
On 1/12/2013 1:34 PM, snowcrash007 wrote: > > Is it ok to leave a bike on a motorcycle jack for long periods of > time? Wondering if it may warp or put undue stress on anything. > > Crash > > [Non-text portions of this message have been removed]
-
- Posts: 2246
- Joined: Fri Oct 10, 2003 6:02 pm
jack question
On Sat, 12 Jan 2013 21:34:30 -0000 "snowcrash007"
writes:
<><><><><><> <><><><><><> Crash, I don't see how it would cause any issues. Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650 . . ____________________________________________________________ Fast, Secure, NetZero 4G Mobile Broadband. Try it. http://www.netzero.net/?refcd=NZINTISP0512T4GOUT2> Is it ok to leave a bike on a motorcycle jack for long periods of > time? Wondering if it may warp or put undue stress on anything. > > > Crash
-
- Posts: 25
- Joined: Sat Feb 04, 2012 8:41 am
jack question
Ok cool thanks. Thought it was a silly question but figured better to
ask. Just got a jack this week and plan to take off the back tire and
swing arm to lube the pivots and install new links. I will only have
time to work a bit on the weekends over the winter.
Crash
Who is online
Users browsing this forum: No registered users and 20 guests