opportunity to meet ted simon in florida

[TexasThumpin@aol.com]

In a message dated 1/29/02 2:15:31 PM Central Standard Time, DSN_klr650@yahoogroups.com writes:

> I have been thinking about adding one also, or adding a short LED > above the actual tail light and running the flasher unit to it and > leave the stock taillight do as designed.

Make real sure that the flasher unit is not left under the rear fender or it probably won't last long. The amount of water, dirt, oil, and other road debris that accumulates up in the rear fender can really wreak havoc on the wiring back there. Replacement is a current project of mine, while I have the bike apart. I'm not sure where I saw it, but someone is offering a 50 watt tail light and brake light. I'm not sure if it was Dennis Kirk or not. When I get to that point in my project, I'll let you know. Jim Texas Thumpin [Non-text portions of this message have been removed]

[RM]

On Tue, 29 Jan 2002 TexasThumpin@... wrote:

>I'm not sure where I saw it, but someone is offering a 50 watt tail >light and brake light. I'm not sure if it was Dennis Kirk or not. When I >get to that point in my project, I'll let you know.

I melted my housing with one. Fred says I'm the only poor bastard that this has ever happened to. Be careful.

[sim_n_o]

Anyone Know where I can get a replacement lens for the tail light? I'm sure there all the same but its for a 98'. Thanks Joe S.

[Jim Henry]

Looking for some advise on getting my tail/brake light bulb to "lock" in. The push and twist in to lock technique seems to be wore out. Is a total replacement of the taillight assembly required or just the socket? Right now I found the sweet spot for things to work but with a good jolt it will be dislodged. Would Fred of Ron Ayers be the source?? Thanks. Jim Henry Mechanical Design Associates, Inc. (419) 893-3141 Ext. 118 FAX (419) 893-0687 Jhenry@... http://www.mdaengr.com/> www.mdaengr.com [Non-text portions of this message have been removed]

[Fred Hink]

I would try squeezing the socket together slightly with some pliers at the notch that holds the bulb. I would also replace the bulb. Fred http://www.arrowheadmotorsports.com http://www.angelfire.com/ut/moab/cmc.html

----- Original Message ----- From: "Jim Henry" To: DSN_klr650@yahoogroups.com> Sent: Tuesday, May 04, 2004 10:01 AM Subject: [DSN_klr650] tail light > Looking for some advise on getting my tail/brake light bulb to "lock" in. The push and twist in to lock technique seems to be wore out. Is a total replacement of the taillight assembly required or just the socket? Right now I found the sweet spot for things to work but with a good jolt it will be dislodged. > Would Fred of Ron Ayers be the source?? > > Thanks. > > > > Jim Henry > Mechanical Design Associates, Inc. > (419) 893-3141 Ext. 118 > FAX (419) 893-0687 > Jhenry@... > http://www.mdaengr.com/> www.mdaengr.com > > > [Non-text portions of this message have been removed] > > > > List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Unsubscribe by sending a blank message to: > DSN_klr650-unsubscribe@yahoogroups.com . > > > Yahoo! Groups Links > > > > > >

[James L. Miller Jr.]

Try the bulb 180 from how you're sticking it in. If it's a 2 dot bulb (2 dots on the bottom, contacts actually) it's a "polarized" plug. One of the "tits" on the side is higher than the other. If this isn't the case and you have the correct bulb for the application, give it a light squeeze with a pair of pliers (the light socket, not the bulb) and try it again. millerized

--- In DSN_klr650@yahoogroups.com, "Jim Henry" wrote: > Looking for some advise on getting my tail/brake light bulb to "lock" in. The push and twist in to lock technique seems to be wore out. Is a total replacement of the taillight assembly required or just the socket? Right now I found the sweet spot for things to work but with a good jolt it will be dislodged. > Would Fred of Ron Ayers be the source?? > > Thanks. > > > > Jim Henry > Mechanical Design Associates, Inc. > (419) 893-3141 Ext. 118 > FAX (419) 893-0687 > Jhenry@m... > http://www.mdaengr.com/> www.mdaengr.com > > > [Non-text portions of this message have been removed]

[barocky]

Tail light doesn't come on with key. Brake light still works. Tried different bulbs. Also using rear break doesn't activate brake light I tried adjusting it and still nothing. Is there a connection midway along this wire somewhere? Thanks BA

[Darren Clark]

Look for a bad ground wire from the bulb socket. barocky wrote:

> Tail light doesn't come on with key. Brake light still works. Tried different bulbs. Also using > rear break doesn't activate brake light I tried adjusting it and still nothing. Is there a > connection midway along this wire somewhere? Thanks BA > > > > ------------------------------------ > > List sponsored by Dual Sport News at: www.dualsportnews.com > List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Member Map at: http://www.frappr.com/dsnklr650Yahoo! Groups Links > > > > >

[simonhpearce]

am not sure how many other members the group has in Florida, but I am excited to post this opportunity. Unfortunately these days there are all too many scams going around the internet. I am not that active on the group so I have posted my phone number if anyone would prefer to call me to discuss. I am not affiliated to Ted Simon in any way other than I have read his books and am extremely excited at the chance to meet and chat with the chap... Check out http://www.jupitalia.com This is the website run by motorcycle adventure pioneer Ted Simon. Ted has travelled solo (truly solo!) around the World TWICE. The first time was in 1973 on a Triumph. During his second trip, in 2000 (this time on a BMW) he celebrated his 70th birthday. He has published several books chronicling his adventures. Ted's books were the inspiration for Ewan McGregor and Charlie Boorman's trip around the World in the TV show Long Way Round (Ted also appeared in one episode when he met up with Ewan and Charlie in Mongolia). Ted recently put together a movie combining cassette tape audio, videos and pictures from his trips. He presented this in California, Kentucky and also in Orlando (some of you may have been lucky enough to attend). Somehow I missed the news about the Orlando show! So over the last week or so I have been communicating with Ted to investigate the possibility of him coming back to Florida. I think this is a great opportunity for those interested in motorcycles and adventuring, or even those who just love to hear a great tale. Ted will be going to Europe at the end of April and has made provisional plans to make a stop in Miami en-route. Because of flight schedules Ted will need to be in Miami for 5 nights which will prove costly. I therefore need to get a reasonably firm idea of numbers of people who would attend. Cost-wise the aim would be for us to share some of Ted's costs for the stay and maybe buy a few of his books. The more of us who go the cheaper it would be! So let me know that you are interested and spread the word among friends, family, and associates who may have an interest. Ted has to make his flight plans firm by Sunday so please let me know by email at simonhpearce@... or phone 727-686-0992 over the next couple of days. I'll be contacting various motorcycle groups and organizations but please feel free to pass this message on. Regards, Simon