pics

[Jason Gilmore]

Some places my KLR has taken me... Jason

>From: Jason Gilmore >Reply-To: siddharthajg@... >To: siddharthajg@... >Subject: Pics >Date: Sun, 8 Oct 2006 13:48:37 -0700 (PDT) > > > > > > >--------------------------------------------------- >Get FREE 4x6 prints from my album(s)!* > >View my photos! > >I invite you to view the following photo album(s): > >KLR-650 > >Here's how: > >http://www1.snapfish.com/getimageforshare/p=6081160339428425/l=214895396/s=57640367/t=ALB/g=27521293/otsc=SYE/otsi=SALB > >1) Visit the link below to access my photos on Snapfish. > >Jason's photos > >2) You'll be asked to type in your name and email address and then choose a >password. This ensures the privacy of my pictures and also sets up your own >password-protected account on Snapfish. > >If the link above does not work, highlight the link below using your >cursor. Then copy and paste the link into your browser address window and >hit the "Enter" or "Return" key on your keyboard. > >http://www1.snapfish.com/share/p=6081160339428425/l=214895396/g=27521293/otsc=SYE/otsi=SALB > >3) If you'd like, you can easily order reprints or enlargements of my >photos, right from Snapfish for as low as 12¢ each -- every day! Just >click the "order prints" button while viewing my photos to place an order. >*First-time customers only. > http://www.snapfish.com/infothreefree/otsc=SYE/otsi=SALB > > > > > >Snapfish - the best value in photography.

_________________________________________________________________ Share your special moments by uploading 500 photos per month to Windows Live Spaces http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://www.get.live.com/spaces/features

[E Hines]

I finally worked on my bike this weekend. I started with the oil screen and coolant change. I could not believe the junk around my oil screen including the end to my do-hickey spring. I will post the pictures under 2003 oil screen. The only problem I had all day was when removing the 2nd cover to change the spring one of the gear assembly came out to the balancer chain (yes the one the do-hickey attaches to). The back washer came off and entered the black hole behind the gear. I did not notice it coming off, but after looking at the manual noticed it missing. After about 10 minutes of sweating and fishing my magnet probe finally pulled it out. I had no other problems. The bike is all back together except for one cotter key (to the rear brake) and the moose skid plate. I did use the smaller spring in the kit. I have run the bike for about 10 minutes and all seems well. I believe it is running a little smoother also. [Non-text portions of this message have been removed]

[Jim Priest]

On 10/8/06, E Hines wrote:

> I finally worked on my bike this weekend. I started with the oil screen and coolant change. I could not believe the junk around my oil screen including the end to my do-hickey spring. I will post the pictures under 2003 oil screen. The only problem I had all

Did you re-use the gaskets after checking the oil screen? I need to do the doo and am thinking of checking the screen and doing a coolant change as well. Jim

[E Hines]

I reused all the gaskets except the for the water pump. When I did my Brother-inlaw we had to change all of his (1998). Jim Priest wrote: On 10/8/06, E Hines wrote:

> I finally worked on my bike this weekend. I started with the oil screen and coolant change. I could not believe the junk around my oil screen including the end to my do-hickey spring. I will post the pictures under 2003 oil screen. The only problem I had all

Did you re-use the gaskets after checking the oil screen? I need to do the doo and am thinking of checking the screen and doing a coolant change as well. Jim [Non-text portions of this message have been removed]