Howdy All, a few post back the guys where talking about Blue Loctite/theadlocker tasting like
sugar. The tube states that we are to avoid getting on our skin or eating it. That is because is
contains Cyanide compunds. That is the sweet taste. It is not a good idea to injust this stuff.
A lump the size of a matchhead is supposed to be enough to kill an adult. Motorcycling has
enough dangers without adding new ones. Guess I should say "Don't drink the Kool-Aid !!!!"
Regards, Tim
bolt dimensions
-
- Posts: 1
- Joined: Sat Jul 15, 2006 9:23 pm
-
- Posts: 1922
- Joined: Tue Nov 19, 2002 8:31 pm
the sweet taste in threadlock is cyanide (very poisonous)
At 3:22 AM +0000 7/16/06, dr16143 wrote:
Uh.... the mere presence of a nitrile group in a compound does not indicate significant formation of toxic cyanide ion. Mark>Howdy All, a few post back the guys where talking about Blue >Loctite/theadlocker tasting like >sugar. The tube states that we are to avoid getting on our skin or >eating it. That is because is >contains Cyanide compunds. That is the sweet taste. It is not a good >idea to injust this stuff. >A lump the size of a matchhead is supposed to be enough to kill an >adult. Motorcycling has >enough dangers without adding new ones. Guess I should say "Don't >drink the Kool-Aid !!!!" >Regards, Tim
-
- Posts: 338
- Joined: Mon Jan 03, 2005 7:06 pm
the sweet taste in threadlock is cyanide (very poisonous)
The xB ion is more toxic than the xA ion. Walt> Uh.... the mere presence of a nitrile group in a compound does not > indicate significant formation of toxic cyanide ion. > > Mark >
-
- Posts: 131
- Joined: Wed May 10, 2006 11:42 am
bolt dimensions
Ebay has two nice kits, one for the motor and one for the rest. I did not like the compressed oatmeal screws, so i seeked screws elswhere (No it Wasnt A Whore Or A Hooker). Ebay- search KLR. Can you say KLR?
Ernie Campbell
----- Original Message ----- From: weric.caldwell To: DSN_KLR650@yahoogroups.com Sent: Saturday, July 15, 2006 10:37 PM Subject: [DSN_KLR650] Bolt dimensions Where can I obtain the bolt specs/dimensions (ie; grade, size, pitch, length) without taking each one out and measuring? I would like to replace the majority with stainless and possibly a different head configuration. Thanks [Non-text portions of this message have been removed]
Who is online
Users browsing this forum: No registered users and 14 guests