klr handle bar risers

[rxm98]

I bought some of these off Ebay, but after hooking them up, they don't flash. Can anyone help me out with correctly installing these so that they flash when the blinker is on. Thanks

[Chris]

Are they lower wattage than the stock bulbs? The flasher is a thermal flasher that depends on a certain load in order to flash. If you reduce the voltage you need to go to an electronic relay/flasher. I don't have part numbers for you, but others might that have done LED conversions.

On 9/18/05, rxm98 wrote: > I bought some of these off Ebay, but after hooking them up, they don't > flash. > > Can anyone help me out with correctly installing these so that they > flash when the blinker is on. > > Thanks > > > > > Archive Quicksearch at: http://www.angelfire.com/ut/moab/klr650_data_search.html > List sponsored by Dual Sport News at: www.dualsportnews.com > List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > > > Yahoo! Groups Links > > > > > > >

[rxm98]

I believe they are lower wattage at 6W per bulb. I have an old stock one rated at 50W.

[kurt thomas]

does anyone else want a copy?

----- Original Message ----- From: Kurt Thomas To: rxm98@... Sent: Monday, September 19, 2005 6:50 AM Subject: Re: Mini Turn Signals enclosed is a pic and a powerpoint how-to Message: 21 Date: Sun, 18 Sep 2005 18:49:24 -0000 From: "rxm98" Subject: Mini Turn Signals I bought some of these off Ebay, but after hooking them up, they don't flash. Can anyone help me out with correctly installing these so that they flash when the blinker is on. Thanks [Non-text portions of this message have been removed]

[telliott@aol.com]

In a message dated 9/19/2005 5:30:04 P.M. Central Daylight Time, DSN_KLR650@yahoogroups.com writes: From: "Kurt Thomas" Subject: Re: Mini Turn Signals does anyone else want a copy? YES, I'd really like to have it. I tried some LED signals and changed the flasher to an electronic one and it still wouldn't flash. Thanks, Terry [Non-text portions of this message have been removed]

[a14@att.net]

I am using the Eagle risers (7/8") with 'ATV High' bars. This combo is the highest you can go unless you use taller risers. All cables reach fine with minor adjustment except the choke cable but that was not a problem for me with the push to cancel turn signal/headlight switch which relocates the choke lever. A choke lever and bracket is available separately if you need to relocate it inboard using the stock switch housing. Walt -------------- Original message ---------------------- From: Luc Legrain

> Hey Guys , > How high can you raise the handle bar before you have to get longer cables ? > Thanks. >