partial inner fender removal!!!!!

[Bryan]

My headlight is making buzzing vibration sound at higher revs. What do I need to tighten up to fix this, do I need to remove the fairing? I checked all the bolts I could get to with the fairing on and they were tight. Thanks, Bryan Dolan KLR 650 A19 Houston, TX

[klr9992001]

--- In DSN_KLR650@yahoogroups.com, "Bryan" wrote:

> My headlight is making buzzing vibration sound at higher revs. What > do I need to tighten up to fix this, do I need to remove the fairing?

Yes. It's the center bracket on the bottom of the head light. Just remove the broken half and forget about it. Dan

> > I checked all the bolts I could get to with the fairing on and they > were tight. > > Thanks, > Bryan Dolan > KLR 650 A19 > Houston, TX

[Doug Pippin]

Bryan Had the same noise when I first bought a KLR. Fixed mine by taking off the fairing and tightening the screws that hold the headlight bulb in place. Put a little blue Loctite on them before tightening and your buzzing should go away. Doug in NC ---------- At 01:14 AM 8/26/2005, you wrote:

> Date: Fri, 26 Aug 2005 01:13:19 -0000 > From: "Bryan" >Subject: buzzing klr headlight > >My headlight is making buzzing vibration sound at higher revs. What >do I need to tighten up to fix this, do I need to remove the fairing? > >I checked all the bolts I could get to with the fairing on and they >were tight. > >Thanks, >Bryan Dolan >KLR 650 A19 >Houston, TX

---------- Doug Pippin 828-684-8488 dpippin5@... ---------- [Non-text portions of this message have been removed]

[laguyyy310]

I recently discovered a semi-legal way to remove the inner fender!!! With a dremel moto tool cutting disc, I reached underneath and cut a crescent shape between the liscence light and the brake light. I allowed the brake light and remaining inner fender intact and well hidden. The wires were taped off and will later be removed to the liscence light. I relocated the plate directly beneath the tail light on the rear outer fender. With only 2 holes it stays in place and lit enough by the tail light. I have since been pulled over twice by cal. highway patrol ...just to check my bike out!!! I even bent the plate horizontal which lights it great but makes it illegible to passing motorists and chp. This has been a great thing since my mods make me the fastest enduro in los angeles traffic and malibu trails!!! Let me know youre questions, thoughts, among inner fender removal and misc. mods!