nklr - more nklr!!! yup still nklr

[Kathi Clark]

Anyone know if the Craftsman Motorcycle/ATV jack works with the KLR? I would go out and look at the bottom of my bike, but it is STILL at the dealer. Kathi --------------------------------- Do you Yahoo!? New and Improved Yahoo! Mail - 100MB free storage! [Non-text portions of this message have been removed]

[Mark Sampson]

Anyone know if the Craftsman Motorcycle/ATV jack works with the KLR? I would go out and look at the bottom of my bike, but it is STILL at the dealer. Well---see for yourself here: http://www.bigdogadventures.com/gallery/ Mark Sampson

[Lujo Bauer]

It works if you have one of the standard aftermarket skid plates. Don't know about without. I bought one a couple of months ago. I've been happy with it. -Lujo Kathi Clark wrote:

> Anyone know if the Craftsman Motorcycle/ATV jack works with the KLR? I would go out and look at the bottom of my bike, but it is STILL at the dealer. > > Kathi

[Non-text portions of this message have been removed]

[Greg Roberts]

----- Original Message ----- From: "Kathi Clark" > Anyone know if the Craftsman Motorcycle/ATV jack works with the KLR? I would go out and look at the bottom of my bike, but it is STILL at the dealer. > > Kathi My kids gave me a Craftsman jack last year, and it works great with the KLR. My KLR has an aftermarket skid pan, and it fits just fine. Used the jack last night when I pulled/cleaned/replaced my carb. I used the included tie-down straps and was easily able to turn the bike around in the driveway while it was jacked up to the maximum height. Greg Roberts --- [This E-mail scanned for viruses by Declude Virus]

[Rich Rakich]

Works well, if you still have the stock bash plate, remove it first and it will sit flat and stable. If you leave the stock bask plate on, it will not sit flat. Rich

> -----Original Message----- > From: Kathi Clark [mailto:veggirl1964@...] > Sent: Wednesday, August 04, 2004 9:32 PM > To: KLR List > Subject: [DSN_klr650] craftsman jack > > > Anyone know if the Craftsman Motorcycle/ATV jack works with > the KLR? I would go out and look at the bottom of my bike, > but it is STILL at the dealer. > > Kathi >

[Kathi Clark]

Thanks. I do have an aftermarket skid plate. It is sitting on the shelf in the garage, just waiting for my bike to come home so that I can put it on. Kathi Lujo Bauer wrote: It works if you have one of the standard aftermarket skid plates. Don't know about without. I bought one a couple of months ago. I've been happy with it. -Lujo Kathi Clark wrote:

> Anyone know if the Craftsman Motorcycle/ATV jack works with the KLR? I would go out and look at the bottom of my bike, but it is STILL at the dealer. > > Kathi > ATTACHMENT part 2 application/x-pkcs7-signature name=smime.p7s

--------------------------------- Do you Yahoo!? New and Improved Yahoo! Mail - 100MB free storage! [Non-text portions of this message have been removed]

[Kathi Clark]

Well, that pretty much answered the question. Thanks! Kathi Mark Sampson wrote: Anyone know if the Craftsman Motorcycle/ATV jack works with the KLR? I would go out and look at the bottom of my bike, but it is STILL at the dealer. Well---see for yourself here: http://www.bigdogadventures.com/gallery/ Mark Sampson List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html Unsubscribe by sending a blank message to: DSN_klr650-unsubscribe@yahoogroups.com . Yahoo! Groups Links --------------------------------- Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. [Non-text portions of this message have been removed]

[GMac999]

Kathi, It works with the factory and the Dual Sport skid plates. With the factory skid plate I definitely use the tie down straps that came with it, but the Dual Sport doesn't need it for minor maintenance. The factory plate is so flexible that it will allow to rock front to rear. With the straps installed, I move it all over my garage. Greg '95 A9 -----Original Message----- From: Kathi Clark [mailto:veggirl1964@...] Sent: Wednesday, August 04, 2004 8:32 PM To: KLR List Subject: [DSN_klr650] craftsman jack Anyone know if the Craftsman Motorcycle/ATV jack works with the KLR? I would go out and look at the bottom of my bike, but it is STILL at the dealer. Kathi --------------------------------- Do you Yahoo!? New and Improved Yahoo! Mail - 100MB free storage! [Non-text portions of this message have been removed] List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html Unsubscribe by sending a blank message to: DSN_klr650-unsubscribe@yahoogroups.com . Yahoo! Groups Links

[Howard Morris]

Greg Roberts wrote:

----- Original Message ----- From: "Kathi Clark" > Anyone know if the Craftsman Motorcycle/ATV jack works with the KLR? I would go out and look at the bottom of my bike, but it is STILL at the dealer. > > Kathi My kids gave me a Craftsman jack last year, and it works great with the KLR. My KLR has an aftermarket skid pan, and it fits just fine. Used the jack last night when I pulled/cleaned/replaced my carb. I used the included tie-down straps and was easily able to turn the bike around in the driveway while it was jacked up to the maximum height. Greg Roberts Mine also works great to service the bike. Just line up on the footpegs and pump it up. Brings the bike up to a decent height to work on it. Howard A-18 --- [This E-mail scanned for viruses by Declude Virus] List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html Unsubscribe by sending a blank message to: DSN_klr650-unsubscribe@yahoogroups.com . Yahoo! Groups Links --------------------------------- Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! [Non-text portions of this message have been removed]

[dooden]

--- In DSN_klr650@yahoogroups.com, "CA Stu" wrote:

> --- In DSN_klr650@yahoogroups.com, Tim Nielsen wrote: > > OK, see, this is ridiculous. The latest digest has by FAR more

>

> > Tim > > Tim, you can always set up a filter in your email program that sends > everything with "NKLR" in the subject line directly to your trash

>

> My favorite thread was the "NKLR - Where to stash your weed on your > KLR" which was very NKLR, but had me peeing my pants with laughter. >

Do not recall that thread, sure that was'nt on the "Too stoned to remember what list I am on" list ?

> Cheers > CA Stu > PS If you don't agree with this post, you are obviously a stupid, > worthless piece of sh*t, and I will come over there and knock your > three teeth down your moronic GD throat!!!!!! > > > PPS, please note the smiley...

%-)-~~~ Oh ya he said he gets "digest" mode, hard to filter out the NKLR posts when he gets just one huge mail with all the posts attached. Still do not understand why somebody would want an email for all posts, when you can just log in and let yahoo keep them all on the web and you can just read/post/review online. This is coming from somebody with a 24/7 connection however, I suppose if your on dialup (ack). Dooden A15 Green Ape Oh that large 3" tub with the caps strapped to your skid plate would make a nice container to keep your weed. Just keep it pretty full otherwise it might turn into a powder with all them vibrations... And them would be "Good Vibrations"