I just added a Jardine straight thru fiber glass packed muffler to free up
the exhaust and let it sound a bit more like a single. Well they said no
jetting needed but it now only starts and idles on choke and will not take any throttle
at all, just stalls, same if I turn off choke after warm up motor just stops.
So I'm sure someone has ideas on what is needed and also how do I drill out the pilot
screw plug, do you need to remove carb. or can you rotate it enough?
Guy's, I've ridden and worked on my dirt and dual sport bikes for over 50 years
so I'm not a novice. Thanks for any help or suggestions. Ed. 04-KLR 650
[Non-text portions of this message have been removed]
nklr rust converter
-
- Posts: 814
- Joined: Sat Aug 30, 2003 5:24 pm
carburetor tuning
If you mean mashonline.com (they didn't list their name when they listed
the old-style Jardine I bought on Ebay this past winter), yeah they told
me the same thing. They also told me it was "barely louder than stock"
which was sheer bullsh*t as well. If you mean a new style Jardine, that
thing was rated at 102db, I hope you don't live anywhere near me. Or
anyone who votes.
First, just drilling out the pilot screw won't really sort the jetting,
you'll also want some washers under the needle and maybe a bigger main
(maybe only one up) and . I didn't think the Jardine had anything on the
stock pipe on the high end, and I definitely don't think it was as
"driveable" as the stock pipe. It also sticks out farther AND doesn't
have a spark arrestor. Who the hell sells a road-use-only pipe for a
dualsport bike?
And I'm not sure what you mean by "sounds like a single", I thought it
"sounded like a single with a crappy exhaust". Not to mention the
Jardine paint flaked off the second time I ran the bike, and the pipe
looks like it was used for ten years, not two months.
AND, if you use anything other than a stock tire or road-biased d/s tire
the fat midpipe will foul the rear wheel.
My advice is to sell the thing to someone not on the list, or return it
because your bike won't run with it as they had promised. Take the money
and buy progressive fork springs, or a sheepskin, or handguards, etc-
there's a million other places to put that money that will improve the
experience of riding and owning that bike. Buy a cover, buy a trickle
charger, but a years worth of oil and filters, buy a spare stock air
filter so you just change it when needed and clean the dirty one
later........
I'm back to the stock pipe. Tried a lot of exhausts, always ended up
back to stock.
Devon
31evo@... wrote:
-- Devon Brooklyn, NY A15-Z '01 KLR650 '81 SR500 cafe racer "The truth's not too popular these days....." Arnold Schwarzenneger, in The Running Man>I just added a Jardine straight thru fiber glass packed muffler to free up >the exhaust and let it sound a bit more like a single. Well they said no >jetting needed but it now only starts and idles on choke and will not take any throttle >at all, just stalls, same if I turn off choke after warm up motor just stops. >So I'm sure someone has ideas on what is needed and also how do I drill out the pilot >screw plug, do you need to remove carb. or can you rotate it enough? > >Guy's, I've ridden and worked on my dirt and dual sport bikes for over 50 years >so I'm not a novice. Thanks for any help or suggestions. Ed. 04-KLR 650 > > > >[Non-text portions of this message have been removed] > > > >List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html >Unsubscribe by sending a blank message to: >DSN_klr650-unsubscribe@yahoogroups.com . > > >Yahoo! Groups Links > > > > > > >
-
- Posts: 1037
- Joined: Sun Sep 29, 2002 11:52 am
carburetor tuning
--- In DSN_klr650@yahoogroups.com, bigfatgreenbike wrote:
And I'm cheap enough to be pleased to benefit from your experience.> > My advice is to sell the thing to someone not on the list, or return it > because your bike won't run with it as they had promised. Take the money > and buy progressive fork springs, or a sheepskin, or handguards, etc- > there's a million other places to put that money that will improve the > experience of riding and owning that bike. Buy a cover, buy a trickle > charger, but a years worth of oil and filters, buy a spare stock air > filter so you just change it when needed and clean the dirty one > later........ > > I'm back to the stock pipe. Tried a lot of exhausts, always ended up > back to stock. >
-
- Posts: 837
- Joined: Wed Apr 21, 2004 1:41 pm
nklr rust converter
On Tue, 25 May 2004, Gerald Langabee wrote:
Well, I wouldn't call my post definitive. I did a bit of old car restoration some years back, and there is a LOT more definitive stuff out there. Check out an auto body restoration manual at the library for more info, especially one aimed at restoring "classic" cars, which typically have serious rust problems (especially old Volkswagons, whose floorboards are often Flintstones Specials). -E> Thanks Eric, and all those who commented, I was waiting for that > definitive post which contained all the necessary info needed.
Who is online
Users browsing this forum: No registered users and 26 guests