nklr paypal

[lylelovet@yahoo.com]

oil pump failed ---mechanic allready has 300.00 worth of parts in my 93 KLR650 ----But the part of the head where the cam rides is thrashed --- new head cost too much -----need used one -----cant seem to find one--- all I have running now is my Suzuki FA50----not fun uphill----- can anyone help me find KLR head? ----thanks-----MO-------

[Pierre]

Hi, I recently broke the clutch cover on my bike, and found a replacement at : http://www.angelfire.com/biz/stockers/ 1-619-239-2071 I think they had a 01 KLR being dismantled: check with them, I was happy with the service. Make sure you get a good price ready (eg from ronayers.com).They'll probably ask you how much you were quoted and then divide it by two. This part (11008-1295) can only be had as a whole and costs around $610 at ronayers. You may actually be better off shopping for a complete engine, second hand of course. Also (question for the machinists out there), see if you could get your original head remachined, perhaps using bronze guides for where the cams rest). Good luck Pierre

----- Original Message ----- From: To: DSN_klr650@yahoogroups.com> Sent: Wednesday, February 25, 2004 7:04 AM Subject: [DSN_klr650] Need Head > oil pump failed ---mechanic allready has 300.00 worth of parts in my > 93 KLR650 ----But the part of the head where the cam rides is thrashed --- > new head cost too much -----need used one -----cant seem to find one--- > all I have running now is my Suzuki FA50----not fun uphill----- > can anyone help me find KLR head? ----thanks-----MO------- > > > > List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Unsubscribe by sending a blank message to: > DSN_klr650-unsubscribe@yahoogroups.com . > > > Yahoo! Groups Links > > > > > > >

[Devon]

it's not a telegram ---- you're not paying by the word --- you can afford to use puctuation ---- Seriously, if the oil pump failed, make sure the oil strainer screen is in place- The oil pump is practically a no-fail item unless a chunk of something gets into it. The head and the cam caps are machined together, you will have to get a matched set. If new is too much money, try Ebay. Every once in a while someone parts out a bike. Devon lylelovet@... wrote:

>oil pump failed ---mechanic allready has 300.00 worth of parts in my >93 KLR650 ----But the part of the head where the cam rides is thrashed --- >new head cost too much -----need used one -----cant seem to find one--- >all I have running now is my Suzuki FA50----not fun uphill----- >can anyone help me find KLR head? ----thanks-----MO------- > >

[Krgrife@aol.com]

In a message dated 2/24/04 8:49:18 PM Central Standard Time, stingray@... writes:

> I've been a verified member for a few years, and have never had a > problem.

Same here. Kurt Grife [Non-text portions of this message have been removed]