dealer pricing

[W.V. Doran]

Greetings Listers...Can anyone direct me to a site with the procedure for replacing fork seals? I also need the address for FAQ's. Thank's in advance WVD ===== WVDoran Scottsdale, AZ __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com

[Mark St.Hilaire, Sr]

> Greetings Listers...Can anyone direct me to a site > with the procedure for replacing fork seals? I also > need the address for FAQ's. > Thank's in advance

Yes sir: http://www.geocities.com/TheTropics/Breakers/8462/KLR650/ForkSeal-RR.html Mark KLR650 Motorcycle Pages: http://klr6500.tripod.com/ HomePage: http://home.adelphia.net/~msaint/index.html My Adelphia Email can be "iffy." If you don't get a response, please try: KLR6500@...

[Mark St.Hilaire, Sr]

Oh yeah, and part II... (It's tough getting old!) The FAQ link is appended to every list message: " List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html " Mark KLR650 Motorcycle Pages: http://klr6500.tripod.com/ HomePage: http://home.adelphia.net/~msaint/index.html My Adelphia Email can be "iffy." If you don't get a response, please try: KLR6500@...

[W.V. Doran]

Old! Tell me about it. I see that address every day and forgot where it was. Is there a way to remove the seals without compressed air? Thanks to all who responded. WVD --- "Mark St.Hilaire, Sr" wrote:

> Oh yeah, and part II... (It's tough getting old!) > > The FAQ link is appended to every list message: > > " List FAQ courtesy of Chris Krok at: > www.bigcee.com/klr650faq.html " > > Mark

===== WVDoran Scottsdale, AZ __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com

[Devon Jarvis]

Yes, you need to disassemble them. You'll need to make a damper rod holding tool, this can done with a hacksaw, file, and $10 in materials from Home depot. I don't have the link for the tool handy. Zack? If you replace the schraeder valves on the forks after pouring out the oil, you could probably get the seals out with a bicycle pump. Devon "W.V. Doran" wrote:

> > Old! Tell me about it. I see that address every day > and forgot where it was. Is there a way to remove the > seals without compressed air? > Thanks to all who responded. > WVD > --- "Mark St.Hilaire, Sr" wrote: > > Oh yeah, and part II... (It's tough getting old!) > > > > The FAQ link is appended to every list message: > > > > " List FAQ courtesy of Chris Krok at: > > www.bigcee.com/klr650faq.html " > > > > Mark > > ===== > WVDoran > Scottsdale, AZ > > __________________________________________________ > Do you Yahoo!? > Yahoo! Mail Plus - Powerful. Affordable. Sign up now. > http://mailplus.yahoo.com > > List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Unsubscribe by sending a blank message to: > DSN_klr650-unsubscribe@yahoogroups.com . > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

[W.V. Doran]

I have a small 12 volt tire pump, would that work on the schraeder valves? --- Devon Jarvis wrote:

> If you replace the schraeder valves on the forks > after pouring out the > oil, you could probably get the seals out with a > bicycle pump. > > Devon > > "W.V. Doran" wrote: > > > > Old! Tell me about it. I see that address every > day > > and forgot where it was. Is there a way to remove > the > > seals without compressed air? > > Thanks to all who responded. > > WVD > > --- "Mark St.Hilaire, Sr" > wrote: > > > Oh yeah, and part II... (It's tough getting > old!) > > > > > > The FAQ link is appended to every list message: > > > > > > " List FAQ courtesy of Chris Krok at: > > > www.bigcee.com/klr650faq.html " > > > > > > Mark > > > > ===== > > WVDoran > > Scottsdale, AZ > > > > __________________________________________________ > > Do you Yahoo!? > > Yahoo! Mail Plus - Powerful. Affordable. Sign up > now. > > http://mailplus.yahoo.com > > > > List sponsored by Dual Sport News at > www.dualsportnews.com. List FAQ courtesy of Chris > Krok at: www.bigcee.com/klr650faq.html > > Unsubscribe by sending a blank message to: > > DSN_klr650-unsubscribe@yahoogroups.com . > > > > > > > > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/ ===== WVDoran Scottsdale, AZ __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com

[Bogdan Swider]

> Old! Tell me about it. I see that address every day > and forgot where it was. Is there a way to remove the > seals without compressed air? > Thanks to all who responded. > WVD >

The link that Mark sent you shows you how to do just that. No special tools needed. Rex ( guy that wrote this up ) does tell you how to make a seal driver from PVC pipe but you can install them without that. Someone mentioned recently that you can use your old seals to evenly drive in the new ones. Be forewarned that sometimes you need a lot of PSI. One of my seals quite after 40 lbs. the other took 120 - a record around here. Bogdan

[Bogdan Swider]

> I have a small 12 volt tire pump, would that work on > the schraeder valves? >

Depends on how much pressure you need. Probably it would work fine. Bogdan

[Devon Jarvis]

Couldn't hurt to try. I would think it'll work, though slowly. Wrap a couple of rag around the seal so you don't get sprayed. Devon "W.V. Doran" wrote:

> > I have a small 12 volt tire pump, would that work on > the schraeder valves? > --- Devon Jarvis wrote: > > > If you replace the schraeder valves on the forks > > after pouring out the > > oil, you could probably get the seals out with a > > bicycle pump. > > > > Devon > >

[Bogdan Swider]

> Is there a way to remove the > > seals without compressed air? >

Disregard my post, sorry. I thought you said WITH compressed air. I shouldn't post at this time of day. Still the compressed air method is the easiest even though some think you don't clean out the old oil as effectively. Bogdan