nklr: zr-7

DSN_KLR650
Post Reply
James L. Miller Jr.
Posts: 717
Joined: Wed Jun 20, 2001 6:17 am

pd nerf install

Post by James L. Miller Jr. » Mon Sep 16, 2002 11:16 am

OK, the money came out of the bank on Saturday evening, which tells me they're either on the way or Tim's cashing in to leave town. Anything I need to know from PD Nerf Experienced riders/installers before they get here? Archives are no help, and internet (Google) is about the same. Advice before the "event"? DSN review was OK, just not what I expected to hear about installation. millerized (Yellow PD Nerfs on Green Durabak bike is gonna look nasty! I love it!)

Allan Patton
Posts: 370
Joined: Sat May 11, 2002 3:22 pm

pd nerf install

Post by Allan Patton » Mon Sep 16, 2002 11:59 am

> OK, the money came out of the bank on Saturday evening, which tells > me they're either on the way or Tim's cashing in to leave town. > Anything I need to know from PD Nerf Experienced riders/installers > before they get here? Archives are no help, and internet (Google) is > about the same. Advice before the "event"? DSN review was OK, just > not what I expected to hear about installation. > millerized > (Yellow PD Nerfs on Green Durabak bike is gonna look nasty! I love > it!)
While at the Four Stroke Singles National Owners Club rally in Missouri two weeks ago, I saw two KLRs with the nerfs on them, one yellow, one black, so I ask about installation. He said the only thing was that he had to drill and tap the top hole on the left side. I ask why he didn't drill all the way through and just put a bolt in. He said there is something in there that prevents doing that. Looked to me like I would want to remove the tank and fairing to make tapping easier. BTW, your bike WILL stand out in a group of KLRs. Allan A14

Dave Sumner
Posts: 16
Joined: Mon Sep 09, 2002 7:03 pm

pd nerf install

Post by Dave Sumner » Mon Sep 16, 2002 12:09 pm

One of the screws (left top) has to come out a hole that is under the frame sticker on the right side (on a 2002 anyway), so don't be alarmed if it looks like there is no hole to come out the right side of the frame. All the holes are where Tinm expects them to be. Save some trouble, take the front fender off. I read a post that said you didn't have to , but it was frustrating the effort. Also, it helps to have someone with small hands help get the right site top screw started. --- "James L. Miller Jr." wrote:
> OK, the money came out of the bank on Saturday evening, which tells > me they're either on the way or Tim's cashing in to leave town. > Anything I need to know from PD Nerf Experienced riders/installers > before they get here?
===== Dave Raleigh NC 2002 KLR650 A16 __________________________________________________ Do you Yahoo!? Yahoo! News - Today's headlines http://news.yahoo.com

PRBKLR@cs.com
Posts: 236
Joined: Fri May 12, 2000 10:41 am

pd nerf install

Post by PRBKLR@cs.com » Mon Sep 16, 2002 2:06 pm

Rubber mallet... you need one. I didn't install the PD Nerf, but I did just install the engine guard/hiway pegs (yellow of course) and they were a bit of a booger to get on. I imagine the PD Nerf design is similar in that it installs over the stock motor mounts on the front of the frame. VERY SNUG FIT! I ended up bending the "ears" back on the unit on both sides so I could get it started. Once I got it started, I used a rubber mallet to get it the rest of the way. With the PD Nerf, you've got a lot more to deal with... Good Luck, hope yours goes on easier than mine! "James L. Miller Jr." wrote:
>OK, the money came out of the bank on Saturday evening, which tells >me they're either on the way or Tim's cashing in to leave town. >Anything I need to know from PD Nerf Experienced riders/installers >before they get here? Archives are no help, and internet (Google) is >about the same. Advice before the "event"? DSN review was OK, just >not what I expected to hear about installation. >millerized >(Yellow PD Nerfs on Green Durabak bike is gonna look nasty! I love >it!) > > >Checkout Dual Sport News at http://www.dualsportnews.com List FAQ courtesy of Chris Krok at: http://www.bigcee.com/klr650faq.html > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >

RM
Posts: 1977
Joined: Tue May 09, 2000 7:20 pm

nklr: zr-7

Post by RM » Mon Sep 16, 2002 8:00 pm

On Mon, 16 Sep 2002 InWoods13@... wrote:
>The usefulness of the list to me, is that it's a pretty accurate gauge as >to what you can expect to pay, to insure one of these bikes.
The other option is to call your agent and get him to quote you on several different bikes. Progressive's site does automated quotes, which can be nice when window shopping.

Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests