no fuel through klr650 petcock

DSN_KLR650
Post Reply
Robb E B
Posts: 2
Joined: Wed Oct 10, 2001 7:50 pm

is saddlebag support required?

Post by Robb E B » Wed Oct 10, 2001 8:50 pm

Hi Everyone, Just a quick question from a newbie. I'm wondering if a 'saddlebag support' (K99994-498) from Kawi is required to mount/use some soft bags. My bike has a SupperTrapp ISD2 (?) exhaust - and there seems to be a fairly large gap to the side panel. So - can I forget about the support? TIA. Later, Robb E B '83 RG250 'Firestarter' '99 KLR650 '00 ZG1000 'Yo La Tengo' COG #4127 IBA #8699 Vancouver, BC _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp

John Lyon
Posts: 455
Joined: Mon Apr 17, 2000 10:38 pm

is saddlebag support required?

Post by John Lyon » Wed Oct 10, 2001 10:20 pm

Robb: I would not forget about the support. The risk of melting a side panel is high. The Kawasaki support has not worked very well for some listers based on some posts. IMO,you would probably be better off investing in a set of racks from Happy Trails, Mac-D or Five Star. Happy Trails: http://www.happy-trail.com Mac-D: http://members.dencity.com/mac-d/index.html Five Star: Arrowhead Motorsports is the distributor http://www.angelfire.com/ut/moab/newproduct.html John --- Robb E B wrote:
> Hi Everyone, > > Just a quick question from a newbie. I'm wondering > if a 'saddlebag support' > (K99994-498) from Kawi is required to mount/use some > soft bags. My bike has > a SupperTrapp ISD2 (?) exhaust - and there seems to > be a fairly large gap to > the side panel. > > So - can I forget about the support?
__________________________________________________ Do You Yahoo!? Make a great connection at Yahoo! Personals. http://personals.yahoo.com

monahanwb@yahoo.com
Posts: 912
Joined: Thu Jun 01, 2000 11:31 am

is saddlebag support required?

Post by monahanwb@yahoo.com » Wed Oct 10, 2001 10:57 pm

--- In DSN_klr650@y..., "Robb E B" wrote: I'm wondering if a 'saddlebag support' > (K99994-498) from Kawi is required to mount/use some soft bags. My bike has > a SupperTrapp ISD2 (?) exhaust - and there seems to be a fairly large gap to > the side panel. > > So - can I forget about the support? Yes, I did. I mount the saddlebags a little more forward for any long rides where the muffler gets real hot. Instead of through the grab handles go forward with the straps in front of them. Works just fine.

Arden Kysely
Posts: 1578
Joined: Thu Aug 16, 2001 8:18 am

is saddlebag support required?

Post by Arden Kysely » Thu Oct 11, 2001 9:12 am

I don't use any extra support for my Chase Harper ET4000 bags and haven't melted a side panel yet. I mount the strap over the grab handle part of the rack and have a home-made heat shield over the stock exhaust that pushes the bags out a bit. My bags have a hard plastic insert that helps keep them from pressing on the side panel. I've ridden for a week in 90-100 degrees with this setup. Arden Kysely A11 "Mr. K"
--- In DSN_klr650@y..., monahanwb@y... wrote: > --- In DSN_klr650@y..., "Robb E B" wrote: > I'm wondering if a 'saddlebag support' > > (K99994-498) from Kawi is required to mount/use some soft bags. My > bike has > > a SupperTrapp ISD2 (?) exhaust - and there seems to be a fairly > large gap to > > the side panel. > > > > So - can I forget about the support? > > Yes, I did. I mount the saddlebags a little more forward for any > long rides where the muffler gets real hot. Instead of through the > grab handles go forward with the straps in front of them. Works just > fine.

Rev.Chuck
Posts: 296
Joined: Tue Aug 29, 2000 12:20 pm

is saddlebag support required?

Post by Rev.Chuck » Thu Oct 11, 2001 11:01 am

I personally would not use the Kawasaki OEM unit. I do suggest you use some type of rack to keep the right bag off the side cover. If you choose not to, you will melt the cover and damage the contents of the right bag. Without question. Of course you could remove the right side cover and carry asbestos clothing only. :) --- "Robb E B"
> wrote: >Hi Everyone, > >Just a quick question from a newbie. I'm wondering if a 'saddlebag support' >(K99994-498) from Kawi is required to mount/use some soft bags. My bike has >a SupperTrapp ISD2 (?) exhaust - and there seems to be a fairly large gap to >the side panel. > >So - can I forget about the support? > >TIA. > > Later, > Robb E B > '83 RG250 'Firestarter' > '99 KLR650 > '00 ZG1000 'Yo La Tengo' > COG #4127 > IBA #8699 > Vancouver, BC > > >_________________________________________________________________ >Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp > > >Checkout Dual Sport News at >http://www.dualsportnews.com >Be part of the Adventure! > >Visit the KLR650 archives at >http://www.listquest.com/lq/search.html?ln=klr650 > >Post message: DSN_klr650@yahoogroups.com >Subscribe: DSN_klr650-subscribe@yahoogroups.com >Unsubscribe: DSN_klr650-unsubscribe@yahoogroups.com >List owner: DSN_klr650-owner@yahoogroups.com > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
== Rev. Chuck :^)>+ A13 Antelope, California http://KLR650.50Megs.Com/ Or http://DualSports.OnWeb.CX/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _____________________________________________________________

squidwannabe@hotmail.com
Posts: 262
Joined: Wed Mar 21, 2001 3:56 pm

no fuel through klr650 petcock

Post by squidwannabe@hotmail.com » Thu Oct 11, 2001 2:49 pm

> > -- Marc, Kawasaki KLR650 A12, Loveland, Colorado, USA > > > Glad there's someone else around here besides me who misses
the
> obvious. > > Bogdan
I miss my dog. He died 10 years ago.

Post Reply

Who is online

Users browsing this forum: No registered users and 28 guests