ufo lower fender installation, help!

[Rev.Chuck]

>Does anyone have experience installing the UFO lower >front fender on a late model KLR 650...

Dave, here are the instructuions I have on my site, I also have pictures. Go to: http://www.50megs.com/klr650/mods/index.html to see them. 1. Get the front tire off the ground, FIRMLY supporting the bike. 2. REMOVE the front tire 3. Put front axle BACK in the mounting holes (lining up the fork legs for you) 4. Pull loose the bottom of the fork boot and pull them up and out of the way. 5. LOOSELY assemble the fender and brackets on the fork legs 6. Work the bottom of the fork boots into/under the fender-mounting bracket wings, but NOT the clamps. 7. TIGHTEN every thing down 8. Remove the axle 9. Replace the wheel and check alignment of fender (repeat step 6 if needed) 10. Check ALL bolts/nuts and replace cotter key or stay clips on axle I hope this helps :^) == Rev. Chuck :^)>+ A13 http://klr650.50megs.com ~~~~~~~~~~~~~~~~~~~~~~~~ _____________________________________________________________ Email Powered by Everyone.net