this is why you shouldn't drink at work

DSN_KLR650
Post Reply
Steve Swedhin
Posts: 45
Joined: Thu Oct 05, 2000 4:53 am

dynojet upgrade/cobra 4 stroke exhaust

Post by Steve Swedhin » Thu Oct 05, 2000 5:53 am

It is actually a piece of junk, I don't know what the Supertrapp is like so I can't give you a comparison there. The Cobra 4 Stroke has some major design flaws - the housing is aluminum, the collector inside is made of steel and is pressed in. This alone creates two problems - dissimilar metal corrosion and heat expansion differences. What happens is that the steel doesn't expand/contract as much as the aluminum and the aluminum ends up being streched and will allow the collector to rattle around. This will eventually beat the aluminum until it splits in two. In addition the only thing holding the guts tight is the snap ring outside and a spring inside. (My other bitch) I know I've had two of them one bought and one factory replacement. I have E-mailed them with my concerns and disgust and so far received no reply. Not to side with Elden Carl, but as far as I'm concerned stick with stock. He's right on this subject.                                     Steve "Swede" Swedhin.

stephen easter
Posts: 12
Joined: Tue Jul 25, 2000 4:13 pm

this is why you shouldn't drink at work

Post by stephen easter » Thu Oct 05, 2000 8:31 am

--- "Kentey, Kathrin" wrote:
> From: "Kentey, Kathrin" > To: "BRAD (E-mail)" > Subject: FW: This is why you shouldn't drink at work > Date: Wed, 4 Oct 2000 15:32:07 -0400 > > Here is one without sound. > > HINT: you have to be patient with this one!!! > > > ATTACHMENT part 2 application/octet-stream name=slippery.exe
__________________________________________________ Do You Yahoo!? Yahoo! Photos - 35mm Quality Prints, Now Get 15 Free! http://photos.yahoo.com/

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests