nklr; laying it down

[Arne Larsen]

> >Subject: [DSN_klr650] nklr; laying it down > >YIIKES!!! What did you feed that thing? My Valkyrie Tourer was a

svelt 715

> >lbs. =) > > > >Arne > Arne, > It had spotlights added, heel toe shifter, cobra pipes, a set of

loaded boxes

> (1st Aid Kit, spare helmet, jacket and rain gear plus tool kit) and

so on.

> Also, I think you'll find the 700 pound weight is dry. When you

add the oil

> and gas it bumps it up somewhat. > Nick

So it ate well! =) Arne

[John Lyon]

Gregory: Front Axle Torque = 58 ft. lbs. Tire Pressure for the stock Dunlops = 21 psi front, 21 psi rear with a load of 215 pounds or less. (In my dreams :>) 28 psi rear with loads greater than 215 pounds. I would use these numbers only as a ballpark figure. They will change depending on the type of terrain you are riding on. John Howdy. My manual hasn't arrived yet. What is the proper torque value for the front axle on a '98 KLR? What tire pressures should I be running for the front and rear tire? TIA. _______________________________________________________ Say Bye to Slow Internet! http://www.home.com/xinbox/signup.html