nklr - passed a klr in co

DSN_KLR650
Post Reply
Sanders, Eric
Posts: 48
Joined: Wed May 10, 2000 10:34 am

oem shifter follies

Post by Sanders, Eric » Sun Jun 04, 2000 9:49 pm

Hello All, A timeline: 0) Bought Alpinestars, trouble shifting. Contemplated moving up one spline. Too lazy, adapted. 1) Toe of shifter (rubber covered) now appears to be bent towards front of bike some, not a 90 degree anymore. 2) Installed Moose skid plate, one of the pipe clamps prevented downshift to first. Removed clamp. 3) I've had a little trouble coming up short and missing second gear (see number 4?) 4) Noticed play in shifter assembly is allowing a nice gouge in the engine casing from upshifting. 5) Today while prepping for Moab, now the frame isn't allowing a downshift to 1st, gouging the frame. I can't upshift, or downshift. I thought that the OEM shifter was supposed to break, not bend? Thinking of removing and bending the shifter to get me to Moab and pick up an aftermarket from Fred? Any hints on bending, or.........how the shiftlever used to go down to 1st but now hits frame? Much indebted, Eric Colorado Springs A13L 1st bike, hoping to get to my 1st rally!

al.henderson@ames.net
Posts: 2
Joined: Sun Jun 04, 2000 9:31 pm

oem shifter follies

Post by al.henderson@ames.net » Sun Jun 04, 2000 10:31 pm

> > I can't upshift, or downshift. I thought that the OEM shifter was
supposed
> to break, not bend? > Thinking of removing and bending the shifter to get me to Moab and
pick up
> an aftermarket from Fred? > > Any hints on bending, or.........how the shiftlever used to go down
to 1st
> but now hits frame? > > Much indebted, > Eric > Colorado Springs > A13L 1st bike, hoping to get to my 1st rally!
The shift lever bends in as the crack develops along where the lever meets the mount that goes on the splined shaft. Generaly if the shifter is moving in it is already breaking. Inspect closely and possibly get welded or brased locally. It probably won't make it much longer without falling off. Alan Henderson A13 Iowa but in Colorado at the moment

Glenn
Posts: 195
Joined: Wed May 25, 2005 9:19 pm

nklr - passed a klr in co

Post by Glenn » Mon Jun 05, 2000 10:55 am

Hey, I passed a KLR yesterday on Old Stage Rd in Colorado Springs, CO. Was it anyone on the list? Just curious. Glenn A14 __________________________________________________ Do You Yahoo!? Yahoo! Photos -- now, 100 FREE prints! http://photos.yahoo.com

Post Reply

Who is online

Users browsing this forum: No registered users and 27 guests